As a matter of fact changing the voltage is totally safe since the harmful limit is decided by your GPU bios and it won't let the card go further than the safe limit set by factory.
when it comes to any GPU with gddr6 Vram like the RTX 20 series/ RX 5000 series or newer, you need to pay closer attention to performance when overclocking the Vram, unlike gddr5 before it, it doesn't crash at instability, but instead actually decreases performance due to error correction, however you can generally go with higher increments in speed compared to the core-clocks
Thanks, much appreciation for this guide. On my RTX 2060 Super I was struggling to get above 30fps for games like Jedi Survivor and Dying Light 2 on even 1080p in-game settings. With a few small adjustments from what I had seen in this vid, I get a solid 50 fps or so now on Dying Light 2 thus far, and hit 60 in good spots - all on 1440p, I didn't want to push it to my native 4k as the temp was getting into higher 70 range. I try to keep it between 60 and 74 for the highest of temp range. Thanks again, I was getting rather stressed out and desperate for performance, I was about to save up nearly 8,000 AUD for a rtx 4090 gaming rig. You saved me thus far a lot of money, stress and worry. (Sorry for this long comment, I wanted to share my appreciation for this after so long trying different guides and methods). 😁💯
@@faizansarfraz3951 pubg is more a cpu game but you can try the voltage and set it to 100% and check the one where it says force constant voltages on and set de cores(core clock memory clock) on default you then be getting better stable fps so no annoying frame drops and youre card will then be lot more stable but i check you're temps if you do apply the settings
@@Reels-yb9gm I'm not much of an expert on stuff like this, but if it reaches high 80s maybe consult an expert to see if they can help apply something or maybe just advice on how to maintain the temp. Apologies I couldn't help further.
Thank you for this guide. I didn't knew Kombustor was a thing. Might as well started using it instead of using the actual game. As a starting point, you can even start off with +150 memory clock and +300 memory clock and that's still gonna be stable. And then increase the value from there. Next showing us how to undervolt too. These two combination are game changer.
Why do we have to run the stress test at such low fps ? Will it take in affect when switched to 2k? Is it even going to change anything at that point or crash it?. Because I tried doing the test on 2k an it was just trying to crash after a certain amount of tweaks than when I used the 800 resolution for the test I effortlessly kept climbing fps ?!?
@@Brandoncoopper Adjust the core clock first, get the max stable value, if it not, then dial down until stable. After done, start adjust the memory clock and tweak accordingly. It's recommended to use ACTUAL game that's so heavy and MULTIPLE games to test and ensure stability. Mine get stable at +250 core and +1450 mem.
I love a good nonsense guide where the maker has no idea what they're doing. Moving the voltage slider is fine - it will not "mess up" your card. Increasing the voltage limit will usually do absolutely nothing because you're usually POWER limited. If you max out both of these you will get higher power draw, which will lead to higher temperatures. The higher temperature is the only thing that will degrade the card faster. Running a static fan speed is not a good idea, , go into the settings and make a CUSTOM FAN CURVE. I also noticed you only ever referred to the offsets. It is important to explain to people that they need to monitor their actual clock speed (on the left). Boost bins are the minimum amount of clock speed change on a GPU, this means that the slider that you're moving doesn't actually tell you the whole story about what clock speed the card is targeting.
@@official_green if u had actual eyes or some english to ur eyes u would see that I said DO mess with it. Increasing the voltage slider literally has a 0% chance to instantly destroy your card. IT is literally not possible to break your card through msi afterburner.
How did you get your moving background like that? And also the gauges of the temps on your Home Screen on the top left?! Very interested I love ! Thanks I’m advanced
I'm having a 2070, but i never got the flickers that you did. What i realized though - after running the test for a while on high clocks, i started having major fps drops and the fans started to make a weird noise.I ended up turning clock speed down to +115 from +220, and now it's stable and good.
Whats that wallpaper? I am getting a gaming laptop on Christmas, the specs are a RTX 2050. Also, what value on the core and memory clock should i put on the rtx 2050?? pls reply!
Would I do something similar for the NVIDIA GeForce RTX 4060 Ti ?Any assistance you can provide there? MW3 is nice and so is warzone but it just seems it could be better.
try and set youre voltage to the max(100%) and force costant votages on and set youre core clock en memory to default it should be better than what the video said
Question followed steps and gained around 20fps on COD (115fps) played one game, benchmark was around 190ish fps. Went back to software and didn’t change anything just let benchmark run fps started dropping rapidly. Tried changing but now fps on benchmark is around 80 went back to COD and now running normal 75-80ish fps. Restarted cpu and went back to program and benchmark started around 220fps then dropped right back down to 80ish. Is my GPU failing or possible issue with afterburner cause i noticed going back to software temps only around 50F and whn first set it was around 70F, so temps way down and FPS? Strix 1080TI, Ryzen 7 5700x,
@@GambinoLIVE-y8b How do you think you might fix that? As far as I can see, all my fans are working, I've cleaned them recently, the ventilation isn't being blocked by anything.
@@philbofettiArchive Undervolt your GPU. I had the same problem, but from 82° got it down to 65° without touching the airflow in the case, just msi afterburner voltage tweaker
Can I overclock my 4070 or it is better not to?, Btw I do 2k gaming with 165hz monitor... Please help me @Barefox btw been watching u since 2 years ❤.... Love you bro keep on going... btw I found you from GeForce now videos and now i got my brand new pc finally 🙌🤠
its better to set you're voltages to the max en force it constantly and do nothing about the core because you're pc is already pretty fast and new so you really do not need to higher you're cores it only gets warmer and by setting you're voltage higher it will be more stable and don't annoying frame drops speaking from experience and i have those settings on my own gaming rig with a RTX 3060 and nothing broke so far and wil never happen
I have a laptop rtx 3070 ti and I pushed my overclock up to 350 before it crashed then lowered it by 40 like you said. Then I was getting about 500 fps in 600x800 resolution. I then raised my mem clock up about 300 and the stress test was still fine but when I did a benchmark in MW2 it crashed. Do I have to raise the memory clock too? Or can I just do the one?
my specs are gtx 1650 with ryzen-5 5600 and laptop hz is 144 . i want mre fps in valorant , i usually get 135-156 when back apps are running . but get around 200 or more when running just the game . i play in default resolution that is 1960 * 1080 .
I have a laptop with integrated graphics as well as nvidia graphics card but when I am opening the kombustor my integrated graphics card gets auto selected and there is no option to change it
Omg! Nice video, I really struggled a lot with 20 fps but now i'm playing on 21fps after the boost Thanks a Lot!!! edit: THNX FOR THE TWO LIKES OMG!! I DIDNT EXPECT TO GET THIS MANY LIKES< MOM IM FAMOUS
I just got my very first prebuilt gaming PC via UPS today and I don’t know shit about gaming PC’s!! I’m still trying to figure out if the company that built my PC already installed and updated ALL of my drivers and my motherboard BIOS or if everything is just fresh outta the box?! I do know that supposedly windows 11 came with my PC and it’s already installed… I have a ASUS prime X670-P wifi motherboard with 32GB of ram, ryzen 9 7900X CPU and a ZOTAC gaming GeForce RTX 4070 ( I assume even tho it says zotac gaming on it it’s still an NVIDIA GPU?! ) all I wanna do is get everything updated, overclocked if needed and set to maximum performance to squeeze out every single frame i possibly can!!
Want to know how much i can overclock my pc My Specs: Ryzen 5 5500 GeForce RTX 3060 16gb RAM Water cooling + 3 intake fans, 3 exhaust fans (temp not a problem)
Everytime I use the msi afterburner and turn up any setting, the msi kombustor stats dont move at all, I looked at the temperature and fps and they all stay the same no matter what i turn up or how much i turn it up, please help.
Sup bro if you don't mind me asking, is this also applicable for laptops I have rtx 3050 with ryzen 5 5500u. (16GB ram with 512SSD) not the best but I use this mostly for games/programming school activities Sorry for asking this in PC peeps out here Anyways hope to gets some advice to some people here also Thanks
Hi I have a Rx 580 8gb 2048sp with base core clock of 1280mhz and memory 1750mhz I overclocked it to core clock 1320mhz and memory 1800 and set the power limit to 17% so far I have a 61-62 fps on a fullscreen kombustor with over 145w of power and 70-73c on temps. Is there still improvement on my OC settings or is it too much?
Why so important vcore settings and power limit for overclock? And Why 85 degrees a safe temp? Asking thats an Expert Overclocker. 😀 Answers: not important, not safe temperature.
hi , i have GTX 1070, Power Limit and TEMP Limit are locked on afterburner, all games are limited on 30fps (cs2 , MW2 , GTA V ...) help pls .. PC , MSI GT62VR 7RE Dominator Pro
thank you for the video my fps dont pass 162 fps MSI kombustor test i dont know why i have asus DUAL RTX 3060 Ti V2 MINI OC Edition is it because of my monitor is 165hz i have no idea could you please help thank you
Monitor doesn’t affect frames. It only affects the amount you can see. And not passing 162 could mean that your either bottlenecked by one of your components or your pc can’t reach past that fps.
when i try to change something with my afterburner it just draags the screen ui. What do i do. Its also not showinng how fast my fans are going or anything. It only identifys my graphics card
U guys here are lucky I’m using a 13 year old (it might be 10 years old ) Sony vaio laptop and I’m bearly playing Minecraft and if it opens before it’s crashes I play it at 1 fps so ye I need a new one but I don’t have enough to buy
well, my AMD MSI RX 580 GAMING X is around 5.7 years old and it wil crashes somtimes while gaming if I higher the power limit , so i won't change anything. ( I did mess with the core voltage in the past without knowing anything. The conclusion is that my GPU is old and not overclockable to prevent crashing. but preformence are fine for what it is.
Not everyone wants to overclock hence we would want to have a software through which we can easily monitor our OC activities and safely overclock the GPU.
@@BareFox Thanks, sorry about that. Btw, i can’t open cfg files or edit them on my Alienware windows 10 computer. I need to do this to activate the power limit, temp limit, and fan speed tabs on my msi. How are you able to access them?
My card is plus 200mhz core and plus 2000 memory mhz I could get more from the core but don’t need too and my card doesn’t go past 60% fan speed at 60 degrees C
2024 How to Safely Overclock your GPU for GAMING: bit.ly/4aJDCU5
As a matter of fact changing the voltage is totally safe since the harmful limit is decided by your GPU bios and it won't let the card go further than the safe limit set by factory.
when it comes to any GPU with gddr6 Vram like the RTX 20 series/ RX 5000 series or newer, you need to pay closer attention to performance when overclocking the Vram, unlike gddr5 before it, it doesn't crash at instability, but instead actually decreases performance due to error correction, however you can generally go with higher increments in speed compared to the core-clocks
just set everyting to default and al you're gpu voltage to 100%
no bro ur gonna go fire
@@CroissantDestroyer9
This tutorial not a so expert and not safe for overclocking. Good luck guys, and dont kill your gpus. An Expert Overclocker.
GUYS BE VERY CAREFUL AND FOLLOW INSTRUCTIONS, YOUR COMPUTER WILL BLOW UP IF U DONT
😂 stop it
@@pullnpray7154I mean is he lying?
@@LlessReal yes he is
no it doesnt😂 only thing that will happen is if youre gpu gets to hot(like 90C) it damages it over time
@@LlessReal yes
Thanks, much appreciation for this guide. On my RTX 2060 Super I was struggling to get above 30fps for games like Jedi Survivor and Dying Light 2 on even 1080p in-game settings. With a few small adjustments from what I had seen in this vid, I get a solid 50 fps or so now on Dying Light 2 thus far, and hit 60 in good spots - all on 1440p, I didn't want to push it to my native 4k as the temp was getting into higher 70 range. I try to keep it between 60 and 74 for the highest of temp range. Thanks again, I was getting rather stressed out and desperate for performance, I was about to save up nearly 8,000 AUD for a rtx 4090 gaming rig. You saved me thus far a lot of money, stress and worry. (Sorry for this long comment, I wanted to share my appreciation for this after so long trying different guides and methods). 😁💯
@@faizansarfraz3951 pubg is more a cpu game but you can try the voltage and set it to 100% and check the one where it says force constant voltages on and set de cores(core clock memory clock) on default you then be getting better stable fps so no annoying frame drops and youre card will then be lot more stable but i check you're temps if you do apply the settings
70 isn’t considered high on a GPU, so you can run 4k easily. If you start pushing mid-high 80s, look into undervolting your card.
My 2060 super goes 87-89 any suggestions?
@@Reels-yb9gm I'm not much of an expert on stuff like this, but if it reaches high 80s maybe consult an expert to see if they can help apply something or maybe just advice on how to maintain the temp. Apologies I couldn't help further.
Just get 3060 3 fan
Thank you for this guide. I didn't knew Kombustor was a thing. Might as well started using it instead of using the actual game. As a starting point, you can even start off with +150 memory clock and +300 memory clock and that's still gonna be stable. And then increase the value from there. Next showing us how to undervolt too. These two combination are game changer.
Glad to help :)
Why do we have to run the stress test at such low fps ? Will it take in affect when switched to 2k? Is it even going to change anything at that point or crash it?. Because I tried doing the test on 2k an it was just trying to crash after a certain amount of tweaks than when I used the 800 resolution for the test I effortlessly kept climbing fps ?!?
@@Brandoncoopper Adjust the core clock first, get the max stable value, if it not, then dial down until stable. After done, start adjust the memory clock and tweak accordingly. It's recommended to use ACTUAL game that's so heavy and MULTIPLE games to test and ensure stability. Mine get stable at +250 core and +1450 mem.
i make memory clock at 200 and almost destroyed my gpu
@@DepresedMonk What GPU
I love a good nonsense guide where the maker has no idea what they're doing. Moving the voltage slider is fine - it will not "mess up" your card.
Increasing the voltage limit will usually do absolutely nothing because you're usually POWER limited. If you max out both of these you will get higher power draw, which will lead to higher temperatures. The higher temperature is the only thing that will degrade the card faster.
Running a static fan speed is not a good idea, , go into the settings and make a CUSTOM FAN CURVE.
I also noticed you only ever referred to the offsets. It is important to explain to people that they need to monitor their actual clock speed (on the left). Boost bins are the minimum amount of clock speed change on a GPU, this means that the slider that you're moving doesn't actually tell you the whole story about what clock speed the card is targeting.
if u had actual ears or some english to ur ears u would hear that he said DONT mess with it
@@official_green if u had actual eyes or some english to ur eyes u would see that I said DO mess with it.
Increasing the voltage slider literally has a 0% chance to instantly destroy your card. IT is literally not possible to break your card through msi afterburner.
Thanks for using your time to do the older video and this new update. This means a lot to us.
No problem!
How did you get your moving background like that? And also the gauges of the temps on your Home Screen on the top left?! Very interested I love ! Thanks I’m advanced
I'm having a 2070, but i never got the flickers that you did. What i realized though - after running the test for a while on high clocks, i started having major fps drops and the fans started to make a weird noise.I ended up turning clock speed down to +115 from +220, and now it's stable and good.
Whats that wallpaper? I am getting a gaming laptop on Christmas, the specs are a RTX 2050. Also, what value on the core and memory clock should i put on the rtx 2050?? pls reply!
Use +70CC & +400MC hope that helps!
Really appreciated. Precise and Straight to the point 🎉
Thanks!
Bro this pos links gave me malware the apps extension virus ! F this guy man
@@BareFox how do you get the time like that on your wallpaper?
Thanks for the guide, really needed it!
Glad to help you buddy!
Kombuster isn't showing my gpus power usage or temp, only the fps, it says like -1 degrees celcius and then 1% power usage, which is definitely wrong
Same, did you fix it? And how?
i have a i5 13400f 1650 and i barely run 144 ingame what can i do?
We have same parts
=
same
hey i have a gtx 750 ti . can you reccomend me the best options
what would be the best oc setting for my specs, my specs are NVIDIA GeForce RTX 4070 1920x1080 13th Gen Intel(R) Core(TM) i7-13700KF Windows 11 build
Yo thanks for the help just built a new pc and I need to OC
Amazing!
Thanks! Very nice tuning!
Thank you too!
Amazing!
Thank you! Cheers!
It is not allowing me to put power and temp limit higher nor fan speed
Would I do something similar for the NVIDIA GeForce RTX 4060 Ti ?Any assistance you can provide there? MW3 is nice and so is warzone but it just seems it could be better.
Is it support other brands ?
AMD Ryzen 7 3700X 8-Core Processor 3.59 GHz , 32.0 GB (31.9 GB usable) 64-bit operating system, x64-based processor were do i find the rest ??
THANK YOU SO MUCH FOR THIS GUIDE. I WANTED TO ASK YOU IF THIS OPTIMIZATION IS ALSO USEFUL TO PLAY WITH MORE FPS IN STEAM VR MODE?🙏
try and set youre voltage to the max(100%) and force costant votages on and set youre core clock en memory to default it should be better than what the video said
Great video, thanks a lot. What would you recommend on my setup Intel i5-4460 and Nvidia GeForce GTX 980.
It's based on trial and error for different brands, just follow the steps in the video!
the cpu doesnt matter for the overclock, and the gpu overclock can very from gpu to gpu, silicon valley and all that
Question followed steps and gained around 20fps on COD (115fps) played one game, benchmark was around 190ish fps. Went back to software and didn’t change anything just let benchmark run fps started dropping rapidly. Tried changing but now fps on benchmark is around 80 went back to COD and now running normal 75-80ish fps. Restarted cpu and went back to program and benchmark started around 220fps then dropped right back down to 80ish. Is my GPU failing or possible issue with afterburner cause i noticed going back to software temps only around 50F and whn first set it was around 70F, so temps way down and FPS? Strix 1080TI, Ryzen 7 5700x,
3070 ti, Ryzen 3600, would this cpu bottleneck my gpu?
3:40 I can’t control my fan speed, power limit, or temp limit with msi. Don’t know how you can. Guess this video won’t help me
nvidia gefore 940mx graphics card is it good for ?
Yeah!
I got it up to +110, +140 but in my game I noticed about a 10-20 fps decrease. What increments should I test in game to get the most fps?
So do you need to do this ever time you start your pc?
you can run it on startup, and save profiles
3060 Ti FE
Got a +220 core and +1000 memory OC. Temperature never exceeded 78C.
Went from 98 to 105 FPS in Forza Horizon 5 at 1080p Extreme preset.
Well, I'll say it's a win!
I'm also using the 3060 Ti, but I'm heating 80 degrees almost as soon as I start boosting the core clock. What's going to affect mine more than yours?
@@philbofettiArchive probably airflow problem
@@GambinoLIVE-y8b How do you think you might fix that?
As far as I can see, all my fans are working, I've cleaned them recently, the ventilation isn't being blocked by anything.
@@philbofettiArchive Undervolt your GPU. I had the same problem, but from 82° got it down to 65° without touching the airflow in the case, just msi afterburner voltage tweaker
thanks for frying my gpu
This tutorial not a so expert and not safe for overclocking. Good luck guys, and dont kill your gpus. An Expert Overclocker.
I was on 140 before in creative now im 250 fps while standing and 170 fps while playing, thank youuu
great tutorial man
but how do you get a wallpaper like that?
Always welcome buddy, watch my latest video on Desktop Aesthetics on my channel
Can I overclock my 4070 or it is better not to?, Btw I do 2k gaming with 165hz monitor... Please help me @Barefox btw been watching u since 2 years ❤.... Love you bro keep on going... btw I found you from GeForce now videos and now i got my brand new pc finally 🙌🤠
its better to set you're voltages to the max en force it constantly and do nothing about the core because you're pc is already pretty fast and new so you really do not need to higher you're cores it only gets warmer and by setting you're voltage higher it will be more stable and don't annoying frame drops speaking from experience and i have those settings on my own gaming rig with a RTX 3060 and nothing broke so far and wil never happen
@@CroissantDestroyer9 ohh I got it, thanks man for your help. 😃
Wonderful vid, you explained everything well. Keep up the good work.
Glad to help
@barefox can i increase my fan speed to the highest even if i don’t care about the sound it makes. Will it have cause any damage to the fan?
Probably not
Ijust got a GTX 1080ti 11g, im going to try this soon. thank you
Always welcome
I have a laptop rtx 3070 ti and I pushed my overclock up to 350 before it crashed then lowered it by 40 like you said. Then I was getting about 500 fps in 600x800 resolution. I then raised my mem clock up about 300 and the stress test was still fine but when I did a benchmark in MW2 it crashed. Do I have to raise the memory clock too? Or can I just do the one?
Don't overclock laptops, they get hot enough already
ty, a great tutorial.
Always welcome ♥️
Thank you so much for this. It boosted my fps in Valorant by 75 fps
Glad I could help
my specs are gtx 1650 with ryzen-5 5600 and laptop hz is 144 . i want mre fps in valorant , i usually get 135-156 when back apps are running . but get around 200 or more when running just the game . i play in default resolution that is 1960 * 1080 .
Great video bro
Appreciate it
what kind of gpu do u have?
I have a laptop with integrated graphics as well as nvidia graphics card but when I am opening the kombustor my integrated graphics card gets auto selected and there is no option to change it
Lil problem over here, when I'm using the Kombustor it uses a different graphics card rather than the desired one. Any fix?
Omg! Nice video, I really struggled a lot with 20 fps but now i'm playing on 21fps after the boost Thanks a Lot!!!
edit: THNX FOR THE TWO LIKES OMG!! I DIDNT EXPECT TO GET THIS MANY LIKES< MOM IM FAMOUS
Glad I could help!
I just got my very first prebuilt gaming PC via UPS today and I don’t know shit about gaming PC’s!! I’m still trying to figure out if the company that built my PC already installed and updated ALL of my drivers and my motherboard BIOS or if everything is just fresh outta the box?! I do know that supposedly windows 11 came with my PC and it’s already installed… I have a ASUS prime X670-P wifi motherboard with 32GB of ram, ryzen 9 7900X CPU and a ZOTAC gaming GeForce RTX 4070 ( I assume even tho it says zotac gaming on it it’s still an NVIDIA GPU?! ) all I wanna do is get everything updated, overclocked if needed and set to maximum performance to squeeze out every single frame i possibly can!!
Don’t overclock if your new to computers, just gonna kill your pc and slow it down faster
i did this but for some reason my GPU power was -1% and it wouldn't move no matter what i did pls help, wht do i do
Why do the stress test on 800x600 if you’ll be playing on 1080?
16gb ram, i5 1240-p 12th gen, geforce rtx 2050 ? Laptop 60hz
Not recommended!
nice video!
Thanks for the visit
I have an rx580 but my rx6750 xt arrives in a couple days so I can abuse my lil 580 as much as I want
i have a amd ryzen 5 3500 cpu and a nivdia geforce gtx 3500 gpu will it work
whats ur mouse cursor called?
It's neon cursor!
Want to know how much i can overclock my pc
My Specs:
Ryzen 5 5500
GeForce RTX 3060
16gb RAM
Water cooling + 3 intake fans, 3 exhaust fans (temp not a problem)
It depends on trial and error, I can’t hive you specific overclocks but it should be fine till +60CC & +60MC
Geforce RTX 2070 super intel core i7 9th gen 16 gb of ram 600 gb c drive and 900 gb d drive
Everytime I use the msi afterburner and turn up any setting, the msi kombustor stats dont move at all, I looked at the temperature and fps and they all stay the same no matter what i turn up or how much i turn it up, please help.
after you move the slider you need to aply by clicking a checkmark or something below of the sliders
Sup bro if you don't mind me asking, is this also applicable for laptops I have rtx 3050 with ryzen 5 5500u. (16GB ram with 512SSD) not the best but I use this mostly for games/programming school activities
Sorry for asking this in PC peeps out here
Anyways hope to gets some advice to some people here also Thanks
I have an rtx 3060 6gb, is it worth it in 2024?
I’ve watched he’s this maybe 20 times and try everything the same way he does it in the video and nothing happens. FPS is the same. Any suggestions?
i have the 4050 laptop ver. and i dont know what to overclock and by how much please help me
You need to download a new driver so that you can overclock it and also unlock things like dlss and frame generation.🎉 0:50
@@goodtimes506 thank you but how much do i overclock it how much core clock And stuff
This video really helped me alot!
Glad to help you man!
Hey, do you have any idea why it shows "Current GPU Power -1.0%TDP" when I run the stress test?
I'm having the same problem. Have you figured out why?
so, my afterburner is all grayed out and i dont know how to fix it, is it because my gpu is so bad it cant be helped? (730 amd)
Hi I have a Rx 580 8gb 2048sp with base core clock of 1280mhz and memory 1750mhz I overclocked it to core clock 1320mhz and memory 1800 and set the power limit to 17% so far I have a 61-62 fps on a fullscreen kombustor with over 145w of power and 70-73c on temps. Is there still improvement on my OC settings or is it too much?
Why so important vcore settings and power limit for overclock? And Why 85 degrees a safe temp? Asking thats an Expert Overclocker. 😀 Answers: not important, not safe temperature.
I have a 4050 laptop gpu and I wanted to get 60+ fps in fortnite at max settings instead of 30-40 fps
hi , i have GTX 1070, Power Limit and TEMP Limit are locked on afterburner, all games are limited on 30fps (cs2 , MW2 , GTA V ...)
help pls ..
PC , MSI GT62VR 7RE Dominator Pro
Do you have to re apply and open up the after burner ever time you turn your pc off
No, just save it and reuse it
my gpu is nvidia quadro t400 can you say me the overclocking settings
What is the most i can overclock my "Intel(R) Xeon(R) CPU E5-1650 v2 @ 3.50Hz" ?
thank you for the video
my fps dont pass 162 fps MSI kombustor test
i dont know why
i have asus DUAL RTX 3060 Ti V2 MINI OC Edition
is it because of my monitor is 165hz
i have no idea
could you please help
thank you
Monitor doesn’t affect frames. It only affects the amount you can see. And not passing 162 could mean that your either bottlenecked by one of your components or your pc can’t reach past that fps.
Send your specs
google says memory clock can be 1-2000. i’m putting mine to 1500 is that okay?
Will this work for my gtx 970?
Is it normal that I can't boost my power limit above 100% like you did? 100% is the limit of the slider
Blud putting in the work at 1:30 in the morning
I generally work at that time lol
Hi BareFox help pls!
CPU: 12th Gen Intel(R) Core(TM) i5-12600KF 3.70 GHz
RAM: 8 GB
GPU: RTX 3070 ti
What do you recommend?
bro i have literally the same config as you
my temp limit and power limit is on the lowest and i cant move it
For some reason it says my current gpu power is -1.0% tdp WHAT DOES THAT MEAN?
Guys I killed my nvidia quadro k2000 while just messing around, be careful I gotta get a new graphics card now
Damn what graphics card are you thinking about getting
i cant go lower than 400+
[AMD radeon HD 8490]
both for memory and core clocc XD
is dat dangerous? [i just purchased it for layt gaming]
when i try to change something with my afterburner it just draags the screen ui. What do i do. Its also not showinng how fast my fans are going or anything. It only identifys my graphics card
U guys here are lucky I’m using a 13 year old (it might be 10 years old ) Sony vaio laptop and I’m bearly playing Minecraft and if it opens before it’s crashes I play it at 1 fps so ye I need a new one but I don’t have enough to buy
well, my AMD MSI RX 580 GAMING X is around 5.7 years old and it wil crashes somtimes while gaming if I higher the power limit , so i won't change anything. ( I did mess with the core voltage in the past without knowing anything. The conclusion is that my GPU is old and not overclockable to prevent crashing. but preformence are fine for what it is.
And what to do if u use crossfire do u have an idea?
i have laptop and i have two gpus and can u help me to switch gpus its using intel hd gpu not rtx 4050
I have ASUS TUF Gaming GeForce GTX 1660 what is the best settings
Same
I have a 13900k and a 4090 fé what should I plug in I’m a noob
You need to follow the steps in my video!
thanks!
No problem!
Can i overclock my Nvidia MX110 i don't wanna overclock it to much because i'm scared that it will not run
Is AMD FX 6300 able to overclock?
Yes.
Why do we need to download the msi afterburner, did nividia not think users would want to overclock?
Not everyone wants to overclock hence we would want to have a software through which we can easily monitor our OC activities and safely overclock the GPU.
@@BareFox Thanks, sorry about that. Btw, i can’t open cfg files or edit them on my Alienware windows 10 computer. I need to do this to activate the power limit, temp limit, and fan speed tabs on my msi. How are you able to access them?
Ryzen 5 7600, Radeon red devil rx 7800 xt , 32 gb ddr5 vram , gigabyte b650m ds3h mb, 1050 psu
My card is plus 200mhz core and plus 2000 memory mhz I could get more from the core but don’t need too and my card doesn’t go past 60% fan speed at 60 degrees C
Lenovo ideapad gaming 3 nvidia gefore gtx 1650 ( on laptop) is it safe?
No, Don't overclock Laptop GPU... Not good for battery and heating.
I have like 2 fan installed in my room and a cooler underneath it
I did this and it’s giving me DirectX error for over clocking how do I fix that ?
every time i try to download msi kombustor it keeps saying some privacy keeper shit and wont download the kombustor!