Todd the decals look good, but I still like the all black hood and orange hood screens, but that's me , I owned a 650 and I didn't like the decals when I owned it I pull all the decals and polished it to a mirror finish and that's how I road it until I sold it .
Just my 2 cents, I might leave off the 650 INDY sticker under the windshield and maybe put a turbo sticker in its place. I love the look of all the other stickers. She's a beauty!
That's a slippery slope. All black is just perfect, but she's a 650 with a turbo 😮. It's definitely a headlight reminder of what's under the hood. After that its whats stylish and fits 😎 ✨️
Decals look great, said the same thing about the orange dash, that back in the day it would have been gaudy but it’s so period correct you gotta go with it and lean into it.
The decals look great! I'm still no decals on this lol. The decision to go mixed gas seems like a great idea. I never even thought of the fuel/oil ratio when the electric pump is switched on. I bet the exhaust will sound amazing and I also believe the trail ability will be more achieved with your homemade can! I got my 93 xcr 440 serviced and yard ride today! Merry Christmas!!
Wow that's half of our votes I myself would have left the sled as a Super sleeper ....knowing that know one would know what is under the hood looks ok too ...Muskoka Dave Cheers
Hey Todd,, merry Christmas to you, Trent and the fam!! From Neil up here in Maine!! I currently run a fire cat , but I love the wedge triples! Jason 6.5 is coming along great so far! I think the decals are a must!! Plus the windshield is plain it needs a kool turbo decal across the front of windshield!! Just my thoughts!! You and Trent are doing an amazing job!
Omg that looks mint!!! Happy holidays to you guys as well. So for the turbo sticker, I think right under the 650 Indy sticker in-between the hood vents going down the hood,
I see pipe siting on a flange sitting on the bench. Take pipe off the flange set flange on turbo and port match the flange to the turbo. Then take that flange and massage round pipe into that square turbo port. Massage,shrink, pie cut, stretch, ect or get a round to square turbo flange. P.s. you need 3 EGT kit. Or you’ll burn this down. Ps hope I’m not over stepping.
Hi Todd,my buddy does a great job pinstriping.his name is Mike Iverson ,they call him Ike.lives just a few miles from Champlin.dayton I think.drop me a more.merc a doo Rick.
Merry Christmas 🎄 Todd and Trenton!! What an absolute beauty of a sled guys! Love it!! Like your idea of port matching the exhaust flange, should work I would think 👍 Wow! The decals sure make it pop! Sweet! Wonder if you could get a small amount of the lighter blue elsewhere on the sled? Especially towards the back to help it look more “balanced” color wise. Ex. Blue pinstripe on rear bumper, etc. Just a thought 🤷🏻♂️ Keep up the great work guys! 🍻🍻🍻
looks awesome so far.....cant wait until its rippin down the trail. pinstriping is a dying art unfortunatley. thats probably why the cost is so high. it wouldve looked pretty sweet sitting next to bastard😁 Merry Christmas to you and your family
Going to mount pyrometer probes or just watching piston wash? Used to gauge jetting back when I worked for Tim Bender 25 years ago with a tiny light and look at transfer port piston wash. Damn it that makes me feel old…
You need your flange to match that rectangle and pipe to that rectangle. If not you will have low pressure areas on the back side of the drop offs(step downs). Creating hot spots and turbulence messing up the boundary layer (step ups) and cause turbulence. Look at all flange to flange connection as a fluid like a jetboat pump. That would be worth 10mph down on top speed and the low pressure areas would cause wats called cavitation witch is little explosions witch eats away the pump like sandblasting it. This just gives a visual because you can’t see air like water and energy spent doin anything other then what you want it to, “like get in turbo efficiently ” then its energy spent being “anti efficiently”. Just shape the round pipe to that rectangle
Merry Christmas guys ! I think the lower sides as long as it didn’t get hidden by the side bumpers that hood slides into. Be cool if the sticker was in the shape of a knife somehow. Just a thought. lol. Take care
Just a thought if your eliminating the oil bottle maybe make the air box a little bit bigger to maybe help with the air flow I do like the stickers better than I originally though I would
Personally, I would paint the control arms black and leave the springs orange and I would put that Indy 650 decal under the headlight down on the nosecone, but I understand it’s embossed with Polaris already
@ Todd your the man ever since I found your channel I don’t feel weird for loving the old wedges…. I have been searching for a quality RXL efi or Indy 400/ XCR 440
Hi Todd, great work. I had a question on the video at nutters, Machining Carbs boots.the Seat Guy, does he hire out for anyone? I have a 94 storm i need of a new seat. Thanks Joe
Hey Todd, Love the channel. I'm working on a 2004 Pro X 600 and need to do some riveting. Is there a specific brand of rivet you use for snowmobiles that are strong? Do you have a recommendation for a pneumatic rivet gun? Keep up the good work.
Please check out the super thanks button!! Thanks everyone for your support and Happy Holidays
Todd the decals look good, but I still like the all black hood and orange hood screens, but that's me , I owned a 650 and I didn't like the decals when I owned it I pull all the decals and polished it to a mirror finish and that's how I road it until I sold it .
Either way it looks awesome Todd
Merry Christmas to you and your family Todd 🍺🍺
@@larrywarner9314 that sounds awesome
@@larrywarner9314thanks
Those decals look killer!
I agree
For sure with the decals… It looks as good as I thought it would. Todd and Trenton you are building one bad “ Pumpkin “ 😉
I'm glad you like it!
The decals look absolutely amazing. Great job as usual guys! This might be the nicest build yet, and that's some tall cotton!
The decals look amazing!!! Great job guys!!! 🍻🍻
@@franciscloutier9882 thanks
Wow that is killer with the decals! Yes turbo stickers on the sides would be awesome! Nice work! Merry christmas!
I'm with ya, turbo stickers would be awesome! Merry Christmas!
My dad has pinstriped for 47 years! 63 years old now and I bet I could get him to pinstripe for free if you pay the shipping! He loves what he does!
I bet he's really good at what he does
That sled is gonna be awesome, you and Trenton are very talented and your attention to the details is everything 👍
Thanks man! 😁
That sled looks awesome with the decals!! 👍
I think so too!
It sure does
Super job! Yeah, I think a small turbo sticker on either side towards the bottom would be killer. Have a good one, cheers!
@@airman6822 thanks for your opinion
Happy Holidays , Todd ! Sled looks great. Gotta love walking into that garage. Great MAN CAVE.
Thanks! I love my little workshop.
I love the decals! Awesome look! Merry Christmas Todd and Trenton!
@@jeremyhanna7000 thanks
Happy holidays! Decals look awesome they sure pop! 👍
@@nb_outdoors6985 thanks
Decals for sure!! 🤘🏼 It ties it together so well!
@@JonsGarage99 it does
Happy Holiday's To the two TTS,from Todd in Ontario Canada.
Same to you!😁
Just my 2 cents, I might leave off the 650 INDY sticker under the windshield and maybe put a turbo sticker in its place. I love the look of all the other stickers. She's a beauty!
Thanks for the idea
I share this view , this video made me subscribe. Keep those triples alive 💪😎
@jamescowan7914 thanks
My thoughts exactly.
Looks amazing!! Good work guys ,i enjoy these videos
@@derekmartin2896 thanks
That's a slippery slope. All black is just perfect, but she's a 650 with a turbo 😮. It's definitely a headlight reminder of what's under the hood. After that its whats stylish and fits 😎 ✨️
😁
You guys do amazing work on all your builds love watching your videos!!
We appreciate it!
Decals look awesome and the turbo sticker i myself would go on both sides. not the headlight block off. Thanks for another great video.
@Brianjohnson1224V thanks for the input
The hood is killer looks great the stickers really made it pop
Thanks
Loving the decals on, and Merry Christmas to you all
@@chadkohler793 thanks
Absolutely lovin the decals man! I think if you do a turbo decal, a small one like the "liquid cooled" decal size. 🍻
Cool idea
merry christmas todd n trenton, man that 650 is awesome! the decals are gonna be sick!! cant wait to see the eye candy when done👍
Thanks man, you'll see it soon! 😁
Oh ya, decals look great.. maybe take that Center 650 Indy decal off and put turbo decal there. Needs to have some blue in it like the side decals 👊
I like it
Sled looks mint so far great Job, Turbo decals would look good on the lower part of the cowling 👍
@@paintendaveextremecollisio8057 thanks
Love the decals!
Thanks
My first time looking,
Dayyyyyuuuuuuuuuuuuuuuuuummmmm thats awesome. Best looking, Sled Yet Todd. 💪💪
😊 thanks
Decals look great, said the same thing about the orange dash, that back in the day it would have been gaudy but it’s so period correct you gotta go with it and lean into it.
Exactly
Awesome results with the decals!!!!
Thanks a bunch!
Love these decals..and yes..put some Turbo decals also..both side please..❤
Noted!
Man I like those decals and especially the one under the windshield.
I appreciate that
Decal look great!! Can't wait to hear it run!!
We can't wait to hear it either!
Killer decals! I can hardly wait to hear this beast!
We are getting excited
The decnals are bad ass!
Thanks
Decals look killer on it great work, Merry Christmas.
Thanks, I'm glad you like the decals!
Love the Decals
@@otahu26 thanks
Looks great. Merry Christmas!
Thanks, you too!
Should be ready for the big sandy vintage ride!! ;)
@@wyattstowing247 that would be awesome. We hope to meet another UA-cam big hitter if you're going 😁
Merry Christmas Todd and your family
Same to you!
Decals look great!
@@justinbauer1978 thanks
Merry Christmas Todd and Trenton. Gotta love a B.M.
😁
👍 Merry Christmas!!
Same to you!
The decals look great! I'm still no decals on this lol. The decision to go mixed gas seems like a great idea. I never even thought of the fuel/oil ratio when the electric pump is switched on. I bet the exhaust will sound amazing and I also believe the trail ability will be more achieved with your homemade can! I got my 93 xcr 440 serviced and yard ride today! Merry Christmas!!
Thanks! The mixed gas idea was a good one.
Gorgeous with the decals!!
Thanks
Merry Christmas ! Thanks for the content.
Thanks for watching!
😁
Merry Christmas todd to you n your family that thing looks amazing
Thanks
Decals do look great! Happy Holidays guys.
@@brandonhanson8682 thanks
Looks freaking awesome...love the decals..merry Christmas to you and your family...
@@jodyhakamaki5602 thanks
That looks incredible keep up the great work!!!
I appreciate it!
Great video, I totally agree with having decals.
Right on, they really help to give these old sleds some personality.
Love the decals! Looks mint!
Thanks!
Hood decals are looking awesome
Love the orange
Premix is a good idea
I would run 40 -45 to one
Great idea
Merry Christmas!
Same to you!
Wow that's half of our votes I myself would have left the sled as a Super sleeper ....knowing that know one would know what is under the hood looks ok too ...Muskoka Dave Cheers
Thanks
Looks sharp.
Thanks
gorgeous sled boys looks awesome with decals also looks awesome under the hood wow merry christmas
@@billreichheld4839 thanks
Hey Todd,, merry Christmas to you, Trent and the fam!! From Neil up here in Maine!! I currently run a fire cat , but I love the wedge triples! Jason 6.5 is coming along great so far! I think the decals are a must!! Plus the windshield is plain it needs a kool turbo decal across the front of windshield!! Just my thoughts!! You and Trent are doing an amazing job!
Merry Christmas Neil! Thanks for the kind words!
@@toddclyne3493 you’re welcome man!! Can’t wait for fire in the hole!!!
beautiful man. like i mean it to the best looking wedge i’ve ever seen.
Appreciate that
I've owned and Sean a lot of nice Indy s but that one u got there is badass good job man
Thanks so much
Add the turbo sticker just below the 650 stick on the hood 😎
Right on
Looks good bud 👍
Thanks 👍
Merry Christmas! Hell ya looks flipping sweet!
Thanks! You too!
Omg that looks mint!!! Happy holidays to you guys as well. So for the turbo sticker, I think right under the 650 Indy sticker in-between the hood vents going down the hood,
@@victoriaracco8726 that's a new idea
I see pipe siting on a flange sitting on the bench. Take pipe off the flange set flange on turbo and port match the flange to the turbo. Then take that flange and massage round pipe into that square turbo port. Massage,shrink, pie cut, stretch, ect or get a round to square turbo flange. P.s. you need 3 EGT kit. Or you’ll burn this down. Ps hope I’m not over stepping.
Thanks for the heads up!
hood looks great with decals needs a bumper like parts sled and nose cone merry Christmas
That will be happening. Thanks
Awesome work you guys do merry Christmas 🍻would love to buy one of your guys master pieces someday from Sask 🇨🇦
Thanks! I'm glad you appreciate the work we do. 😁
Hi Todd,my buddy does a great job pinstriping.his name is Mike Iverson ,they call him Ike.lives just a few miles from Champlin.dayton I think.drop me a more.merc a doo Rick.
Thanks for the info!
Killer 650 dudes!!😊
Thanks
Merry Christmas 🎄 Todd and Trenton!!
What an absolute beauty of a sled guys! Love it!!
Like your idea of port matching the exhaust flange, should work I would think 👍
Wow! The decals sure make it pop! Sweet! Wonder if you could get a small amount of the lighter blue elsewhere on the sled? Especially towards the back to help it look more “balanced” color wise. Ex. Blue pinstripe on rear bumper, etc. Just a thought 🤷🏻♂️
Keep up the great work guys! 🍻🍻🍻
@@IndyGuyRob I like your ideas. I'll see what we can come up with. I'm visiting my decal lady today
looks awesome so far.....cant wait until its rippin down the trail. pinstriping is a dying art unfortunatley. thats probably why the cost is so high. it wouldve looked pretty sweet sitting next to bastard😁 Merry Christmas to you and your family
You'll see it ripping down the trail soon, I promise! 😁
"Boosted" would look good rite under the 650 👌🏻
🤔
I did vote no decal 😂
But it looks great with them!
Either way a great sled and you did a awesome job
@@rotaxrules100 I won Trenton over once we put the first one on 😁
I would love to see you guys build a sweet triple mountain mod sled sometime. I’m pondering on dropping an 800 triple in my 05 edge rmk.
I would but I don't mountain ride anymore. I had a couple close calls
I would but I don't mountain ride anymore. I had a couple close calls
Decals look awesome 👍
New to the channel gave you a sub
Love these old Polaris sleds
Merry Christmas from the north east 802
Love love love the decals just get rid of the 650 indy one by the windshield
👍
Decals are perfect! With the oil injection being deleted could you put the air box behind the steering post and get rid of the big cut out?
That's an idea
The stickers (Decals) look great . I wouldn't pay 1000.00 for Airbrush and pinstripe the hood either. Merry Christmas 🎄⛄🎄
Right on!
Going to mount pyrometer probes or just watching piston wash? Used to gauge jetting back when I worked for Tim Bender 25 years ago with a tiny light and look at transfer port piston wash. Damn it that makes me feel old…
1 egt in the y pipe . Plug and piston wash will be my tuning
The decals set it off it looks awesome
You guys do a great job on all your builds
@mikehagar2937 thanks
toddclyne your welcome I can't wait to see it off the lift outside
Awesome build very fun to watch! Would really love to get my hands on a black light cover for one of my ultras but man there hard to come by
Someone on FB is making them
Todd, awesome content as always. Sorry its not much of a donation l, hope you can put it to good use. Merry Christmas
We appreciate anything. Thanks so much
You need your flange to match that rectangle and pipe to that rectangle. If not you will have low pressure areas on the back side of the drop offs(step downs). Creating hot spots and turbulence messing up the boundary layer (step ups) and cause turbulence. Look at all flange to flange connection as a fluid like a jetboat pump. That would be worth 10mph down on top speed and the low pressure areas would cause wats called cavitation witch is little explosions witch eats away the pump like sandblasting it. This just gives a visual because you can’t see air like water and energy spent doin anything other then what you want it to, “like get in turbo efficiently ” then its energy spent being “anti efficiently”. Just shape the round pipe to that rectangle
So make a new flange with a square in it?
Looks killer guys!
Thanks
I think the center “650 INDY” Sicker should be “650 TURBO INDY” or “650 INDY TURBO” or something of that rendition. Merry Christmas!
Good idea
I think the decals look great.
Thanks
Notorious for building heat as you know. Nose cone radiator? or did you increase volume with more modern heat exchangers?
I agree. We will definitely not be doing any super long pulls
Merry Christmas guys ! I think the lower sides as long as it didn’t get hidden by the side bumpers that hood slides into. Be cool if the sticker was in the shape of a knife somehow. Just a thought. lol. Take care
Thanks, good idea! 😁
That is awesome nice job
Just a thought if your eliminating the oil bottle maybe make the air box a little bit bigger to maybe help with the air flow I do like the stickers better than I originally though I would
Thanks
Personally, I would paint the control arms black and leave the springs orange and I would put that Indy 650 decal under the headlight down on the nosecone, but I understand it’s embossed with Polaris already
Thanks for the feedback, I appreciate it! 😁
@ Todd your the man ever since I found your channel I don’t feel weird for loving the old wedges…. I have been searching for a quality RXL efi or Indy 400/ XCR 440
Decals...yup yup!
😁
Merry Christmas triple lovin’ fans
😁
Thanks!
We appreciate that. Thanks so much
Where do you buy the jets and other carb parts? Looking for a good supplier.
Fowler parts and service in MN. They ship daily
Hi Todd, great work. I had a question on the video at nutters, Machining Carbs boots.the Seat Guy, does he hire out for anyone? I have a 94 storm i need of a new seat. Thanks Joe
Yes look up Nathan Kinney on FB. He makes them to order
Thanks
80.s turbo retro sticker style. Orange red around letters.
That's a great idea
Two words wow and cool!!
Thanks
Looks killer
😁
Hey Todd, Love the channel. I'm working on a 2004 Pro X 600 and need to do some riveting. Is there a specific brand of rivet you use for snowmobiles that are strong? Do you have a recommendation for a pneumatic rivet gun? Keep up the good work.
I buy all of our rivets from a local industrial supply house