Це відео не доступне.
Перепрошуємо.
How to Install Cab Lights(2015-2019 Chevy/GMC)
Вставка
- Опубліковано 26 тра 2020
- how to install recon cab lights on a k2xx truck, 2014-2018 1500s and 2015-2019 2500/3500
recon lights:
smoked/white: amzn.to/2AbOiOK
smoked/amber: amzn.to/2TIrVHh
clear/white: amzn.to/3eoaLXu
clear/amber: amzn.to/3dbCzxZ
orange/amber: amzn.to/2XA71LH
wire harness: amzn.to/2TL1xwC
Thank you for sharing! I own a 2007.5 GMC Sierra 1500 pickup crew cab short bed 4x4 and I already installed and mounted the clearance lights and wiring I made myself. I have been poking and prodding my driver's side dash wiring for a hot wire to tap into and can't find any. Then I watch this video and it becomes the exact answer that I've been looking for all along. Little speaker plug will be added. Now to get the wire all the way back across to the passenger side. UHG
This was SUPER helpful dude! Thanks!!
I ordered the OE GM lights hopefully they have wire leads on them and I don't need a harness, will figure something out once I have them.
thanks so much ! i really needed the measurements. you are a godsend ! great video !
Very good job bro!!! When can you do my truck lol!! Have a good weekend when you get to it!!
Great video just finish my set up today.
Not sure if you can add a note to your video, but it may be helpful to note that it DOES matter which direction you plug the wire coming from the light into the harness. I have a 2018 2500 and was just switching out the lens colors. Plugged everything in and buttoned it up (foolishly) then realized none of the lights came on. After an hour or so I tried flipping the connector the other direction and they worked. Tricky because they will fit both ways. Unsure if this is the case for all years but assume so for 17-19 at least
When tightening the bolts down. Does the 4 legged “washer” completely spread flat? Or how tight did you go? The instructions for the lights does not specify.
I bottomed them out
Can you tell me the number of the wiring harness, and can you change a burned out bulb
Where are you located? I like your work looking to add some lights to mine
By any chance do you know where do get one of those connectors that are actually in the passenger side fuse panel, or a part number?
Can the visor-light power be used to power these?
Are you sure about measurements? 4.5 back from edge of glass will put me inside support frame on inside. looks to me like 7 inches to center. not sure????
What size wire and terminal did you use to attach the green power supply to the harness?
Great video btw, bout to do this to my 15 lml
Metri-pack series 150, crimped to the green wire. I believe its 18 guage wire
Hi I have a question ! I have Chevy 1500 would those cab lights work on my truck ? Thanks
Should work just fine
How long would you say it took you
I got those cab lights and they last about a year and I got sections of the center light don't work and they look like a gray color in the day time on the exterior
plastic they are junk
This video is 3 yrs. Old how do yours look ?
those self tapping screws tend to loosen with vibration .. better fit some riveted nuts and use allen bolts ..
Hey man been seeing the videos and you got my dream shop can you please tell me what size it is? Thanks
66x80
I realize it's only been less than a year, can I ask how they're holding up.. contemplating on the OE vs these.. some posts show that they're not holding up to good after a year or so... Thanks, great video by the way too... can I have your garage?? :)
My middle light is failing already unfortunately
I have a 2020 2500hd Chevy truck and It didn’t come with cab lights from factory. Can the cab lights work for my truck?
Yes they will work. You will just have to find a power source for them to be tied into. Just make sure you buy the wiring harness that matches the lights.
Boepeep's Performance Where can i find the wiring harness? Do you know of any place or the link to a website?
@@byronparedes6129 the links in the video description will get you what you need. The harness i have linked will work with any of those lights. Theyre not vehicle specific as they just come with a power and ground lead .
Boepeep's Performance Thank you so much!!!!!! I wanna rock them cab lights!
Do you think it’ll mess with warranty ?
Possibly, they'd have to prove that it caused an issue through
Do you think you could run these on the 99-07 body style??
Yes, we put the 07-14 style on an 06 and these are basically the same shape/contour but with a better method of securing them in place.
Boepeep's Performance sounds good! I’ll let y’all know how it goes this weekend 🤞🏻🤞🏻
Boepeep's Performance do you have a picture of the underside of the roof where the secure clamp mounts the light to the roof??
wireless cab lights no holes to drill from caboveramerica.com
I had those lights and had problems with the lights going out of sync all the time.So I sent them back.
they suck. man up and drill a hole
No more syncing issues. New improved .
The only thing that sucks is leaking cab lights