You can drill a hole through a block of wood and run your tubing through it. As you pull the tubing through the hole, it will straighten the tubing out. If it's not a given, the hole needs to be really close to the same diameter as the tubing. Just have to add that in.
Good stuff Devin. So it doesn't matter if you use brake fluid in the clutch reservoir? I've read different stories on that application. Thanks for the vid!
nice…. hey devin quick question. i see alot of ppl actually file down some of the trans bellhousing outer ribs for fuel line clearance but noticed you didnt. do you have any issues at all with the fuel lines rubbing? thanks keep up the good work💪🏻🙌🏻
This is unrelated but I have a question about pin Q19, the speed sensor output... I've read online that if you do nothing with it, you will have a lower rev limit and make less power. It looks like it just runs to the speedometer and I believe my car will have a speedometer signal from elsewhere. Is this info true? If so, I will be doing the weird injector 2 signal wire trick.
There is a vehicle speed sensor wired to the ECU, the speedometer output won't affect the rev limiter or power output. But if you have removed the speed sensor it'll affect the power output, but not the rev limit
You can drill a hole through a block of wood and run your tubing through it. As you pull the tubing through the hole, it will straighten the tubing out. If it's not a given, the hole needs to be really close to the same diameter as the tubing. Just have to add that in.
Dude! That's genius! I think I saw a reel or short like 3 weeks after I did this that showed something similar to that.
@DoctoredGarage that's where I got it from too, lol
Good stuff Devin. So it doesn't matter if you use brake fluid in the clutch reservoir? I've read different stories on that application. Thanks for the vid!
No prob! Yup, "clutch fluid" is just brake fluid with a different label slapped on it for marketing
@@DoctoredGarage Wow, thats news to me. Sneaky bastards!
nice…. hey devin quick question. i see alot of ppl actually file down some of the trans bellhousing outer ribs for fuel line clearance but noticed you didnt. do you have any issues at all with the fuel lines rubbing? thanks keep up the good work💪🏻🙌🏻
Hey Max! Nope! It's a pretty tight fit in some areas but it seems to be ok
This is unrelated but I have a question about pin Q19, the speed sensor output... I've read online that if you do nothing with it, you will have a lower rev limit and make less power. It looks like it just runs to the speedometer and I believe my car will have a speedometer signal from elsewhere. Is this info true? If so, I will be doing the weird injector 2 signal wire trick.
There is a vehicle speed sensor wired to the ECU, the speedometer output won't affect the rev limiter or power output. But if you have removed the speed sensor it'll affect the power output, but not the rev limit