Це відео не доступне.
Перепрошуємо.
How To Change Your Fuel Pump On A 2006-2014 Chevy Tahoe Suburban GMC Yukon
Вставка
- Опубліковано 10 чер 2017
- Brian Eslick from How to Automotive www.howtoautomo... takes you step-by-step through the process of replacing the fuel pump on a 2006-2014 Chevy Tahoe. #HowtoAutomotive #AutomotiveRepair #FuelPump
Affiliate link mentioned in the video for ACDelco MU1711 GM Original Equipment Fuel Pump and Level Sensor Module with Seal amzn.to/2sSl6Uz
Affiliate link mentioned in the video for Lisle 80380 Hose Remover Set - 5 Piece amzn.to/2r96L4U
Affiliate link mentioned in the video for Milwaukee 2754-22 M18 Fuel 3/8" Impact Wr- Xc Kit amzn.to/2p7ktEs
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomo...
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.co....
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive
Be sure to check the links in the description for parts and tools.
How to Automotive t
What’s the fuel line part number?
how much does it cost to replace a fuel pump
Thanks
I'm in the process of doing this job, and I have to say, out of all the how-to videos I've watched, this has to be the best and most thorough one I've seen. Very good ! And thanks for all the info !
Thank you and good luck with the repair!
Just got done with dropping my tank. The steps are perfect. Since I’m doing on the ground without a whole car lift, I found that dropping the spare tire is well worth the time and effect, gives you a ton more room. Thanks for the video!!!
Just read your comment. Do you happen to remember how high you had to jack your vehicle up to remove the tank? or did you use ramps? thanks
This video is awesome! You covered pretty much every step, a lot of people skip the hard parts (like how to disconnect the vent lines which can be a pain). You're awesome man keep it up!
Danny Bryan thank you and thank you for watching!
TIP! If you are a schmuck (like me) and need to drop your gas tank while lying on your back underneath your vehicle.
I used 3 ratchet straps, 2 across the tank (in the factory, steel band locations and 1 pulled around the back of the tank. That third strap allows you to keep the tank from sliding rearward as you lower it. I used a jack to do the lowering and the straps as a limiter, to lift it back up, the straps did most of the work. (the straps also make it easier because you can move the jack out of your way if necessary. As you will see it is necessary to lower the tank to access the connections but you can't lower the tank until you disconnect them... Yeah, exactly!
Be very careful and lower it slowly! The fuel pump output has almost zero slack and the rollover (?) valve (large conn. on top at the back end of tank) passes over a cross member and therefore can easily be damaged (disconnect it before lowering more than an inch or so) . I used the bottom of a plastic water bottle and the factory hose clamp to keep fuel from pouring out of the filler tube after removing the hose.
The 3rd strap is the key, without it the tank will continually slide rearward and get hung up on the rear end and will try to slide off the jack. It's tedious since you have to, many times, release the straps and re-adjust but is better than breaking the connectors or dropping the tank. Good Luck!
Well done video Brian! I just did mine and for some reason my 2011 LT 4WD is a little different of a set up. But really appreciated the video and taking the time to put it out there for every one.
🙏
Vent line was the golden nugget for me. A lot of videos do not mention the vent line. They show them removing the fuel pump.
Best most detailed description I've seen yet, thank you, I noticed on another video the raised filled in circle by your metal bar 07:22 had another white round evap connection like the bigger one to the left.
thanks for your video, because of you i could (well my stepson help also) but because of that reason I don't know what happened that after that he install the pump, why is not reading how much gas i got in the thank, what did "we" did wrong? please help....
Great video! Appreciate you taking the time to save us time and money
Its alot better to see you removing the lines than you explaining how to do it
Man you saved my life with this video thank you for the step by step. Definitely putting the tank back up wasn’t easy 😅😂
Glad the video was helpful. Thank you for watching!
Thanks for your time and expertise. Your video is greatly appreciated.
Not to nitpick but it's actually 2007-2014... 2006 was the last year of the GMT-800 generation. Appreciate the video of course, nicely detailed and instructional, easy to follow! Well done.
Best auto repair vehichle Ive seen.
Steven Waite thank you. Did it go smooth on your repair?
Thorough, yet concise. Thanks for making this video.
Very thoughtful and informative
Now I would like to know exactly where the fuel shut off switch is located
And how to turn it back on
Nice video, very thorough and helpful.
Michael Knight thank you and for watching!
@@HowtoAutomotive i hope you can please answer my question
Excellent 👍 break down of how to do it .
Thank you!
Very good on the explanation and the video great job
Thanks for this I got to do this, this afternoon!!! 🤦🏽♂️
Dude are freaking awesome....This was I on the most informative video I've seen..Save me and my family from having to go to the "Stealership".$364.00 savings..Thank you so much brother..
Goin hard Always happy to hear people saved. Thank you for sharing and watching!
Thx man you explain this very well
Thank you!
I have several codes referring to the fuel pump control modual. 8 to be accurate. It started with system voltage high low voltage codes on the circuit. Then control mod internal performance code and long term memory performance code. I replaced battery and alternator and same codes. Not sure where the ground is but I cleaned up the block ground, firewall and one more under driver side frame. Still happening. This cleared the codes for transfer case codes I was having. Just dont know what to check now or to just take it in to have the pump replaced. Looks expencive and not something I'm able to do in my home shop
Thank you Brian Eslick for making an awesome how to video. I was able to change the fuel pump myself and saved nearly $200. What's your favorite beer and where do I send the 6 pack to?!
Eddie Morales glad to help you save some money. No need to send me anything just happy to help. Thank you for watching!
AC Delco or would a “aftermarket” one be ok to use ?
My rop line on the canister has a different connector looks like a squeeze and pull not like that red tab any suggestions..
very informative i really appreciate ur video thanks
Ronaldo Guerrero glad to help. Thank you for watching!
Smart thing to do would have been to use a brass punch or Aluminum stock to get that ring off! Metal on Metal can Sark!!
also rockauto has a fuel pump ring tool to remove that ring makes things ten times easier.
My 07 Burb leaks fuel only when I fill up. Which line in the video could be the culprit? By the time I pull away from the pump and park, it's stopped leaking.
where is the filter located?
Awesome Video. I don't have a hoist. I have two car ramps that we use for oil changes. Do you think this would be enough to remove the tank? Thanks
Abdulrab Kulaib that’s gonna be a close fit I’m not a hunter percent sure if that’s enough room.
You think i could use a floor jack without a block of wood if i emptied my gas tank? In other words, will the weight of an empty gas tank be light enough to where i could only use a floor jack?
Elmer A most likely you’ll be OK. You might wanna put a towel or something on top of the jack just to be safe.
My 2008 Tahoe is acting up, stalled on me a couple times and wouldn’t turn back on after a couple tries it turned back on if I accelerated it would wanna die. Also starting throwing misfire code and says fuel Rail Pressure Sensor needs to be replaced. Is this a bad fuel pump??
How much can one expect to pay for parts and labor for the fuel pump swap on 2007 Chevy Suburban... ballpark is fine.. appreciate the help!
I was just quoted $900 from a reputable repair shop (not dealership).
Hi Can this be the same on my Avalanche 2007 ?? Thanks
You didn't use a piece of steel to remove that pump retainer ring? Brass or aluminum only. Steel on steel, spark fly, tank go boom just as Ralf says below.
What's the very first hose or line you disconnected the one with the red tab on it? I'm having trouble finding that part for my 2010 tahoe
And the name or part number for the second evap line you disconnected mine broke at the charcoal canister connecter part. If you could help me out that would be so awesome
Was it leaking gas or just bad pump?
Will this be the same for a 2007 escalade? Got 140k miles and i want to change it before it goes out!
Jesus Favela yes it’s the same. I would change it before it gives you trouble. Good luck. Thank you for watching!
How many hours did it take to do this job?
Nice!!
Thank you!
Good
Does this 2007 Chevrolet Tahoe have a fuel filter because I can't seem to find it unless it's well hidden.
Jose Maldonado on that year maybe inside the fuel tank and you would not change it and less you're changing the fuel pump. If not it's going to be on the left side of the vehicle on the frame rail. So you can follow the fuel lines from the motor back to the gas tank and if you don't see it in the line then it's in the tank.
Jose
Fuel pump dead. I've got a full tank of gas. Can't figure out how to get the gas out. Any suggestions?
You have to take the filler neck apart from underneath. And he used a transfer pump. Once you get the neck apart you should be able to slide the pump Lines down the neck and then transferred to a gas can. It’s a pain in the butt. I wish you luck.
@@HowtoAutomotive Thanks
What if u just changed your pump an the gas gauge still doesn't work properly after putting gas In it i park the i get in it it say i have no gas
You either have wiring problems or the gauge in your dash is gone bad.
how would u know u need changing of this pump fuel?
Comarade Lee crank no start..no fuel pressure with a fuel pressure gauge,banging on fuel tank and it starts...lots of things you can go to verify the fuel pump is at fault
If you do it ur self,,$$$?? How much$$?? And how much at a shop$$?
Junior33 Rosales elfuerte roughly over $1000 easily..my buddy’s was like $1600 with replacing the fuel line too lol
@@rahrah8076 your buddy went to the dealer or he got robbed either way he got robbed
Great video but do yourself a favor and get a shop vac and vacuum the top of the tank before removing the pump.
Dual Sport Numbskullz at minute 715 I show you how to clean it with compressed air and rags
A shop vac WTF! Yeah lets get some static electricity going with a shop vac hose when dealing with fuel so I can blow myself up . What a dumbass.
So beautiful good morning
I hate you didn't show how you remove the blue line. That's the only reason I was watching😢😢😢😢
I just lift up the bed..I found it’s easier if you don’t have a lift
made in mexico? how about one made in America?
You mean 2007 and up... 2006 looks like the 2002 model