Hi, please help me. Following the process, when I got to "create partition primary" I couldn't go any further. It says: No usable extent could be found. What should I do?
2:33, I typed in clean and got a response that the disk was successfully cleaned. After typing "create partition primary" I didn't get a response at all, almost as if it expects me to enter something else after that. However, the bigger issue is that even after cleaning the disk, the disk is still not cleaned or formatted. I have data on it which is accessible and works fine, but it won't work in my GoPro anymore. No way to format it.
Error in cleaning. I can see files on one mcsd card. And I can delete all files except 3.(each show 0 in size) But when I remove the card and reinsert, all of the files are back. I've tried on 3 pcs, with the same results.
I tried the method you used using the command prompt. I was able to do everything up to the format command. When I typed in "format fs=fat32" I got the following error message: "DiskPart has encountered an error: The system cannot find the file specified. See the System Event Log for more information." How can I get this flashdrive formatted? (I previously had one or more Linux files on it.)
Tried the 2nd choice (command prompt). It went to "100 completed. Diskpart has encountered an error. The parameter is incorrect. See the system event log for more information". Still unsuccessful. Please help.
I dont know how to repair my raw flash drive ,cant format ,cmd dont work ,disk recovery dont work ,disk management dont work. I just need to format my 128gb of storage ,is anyone knows ,yeah full format
If it's an sd card and cant be formatted and it's not write protected, it means it reached the end of life and the card controller set it to read only to avoid data loss
Reading the comments, below, I noticed there are ZERO successes with these solutions. I just lost time. Hopefully, my laptop will not have further errors.
Are you really going to scroll down without pressing that like button?!
ya
Not yet. It's been unsuccessful x3.
@@miguelbriseno5690 saya Sudah gagal x6
Hi, please help me. Following the process, when I got to "create partition primary" I couldn't go any further. It says: No usable extent could be found. What should I do?
Not working i tried everything
Did not work. It still asks me to format it; then "Windows was unable...". It's a unending circle.
same ]
Tried for 3rd time, now with ALL CAPS: FS=FAT32. Again, the error message about the incorrect parameter pops. It's 3 out of 3 failed attempts. Help!
This only works if the disk is already formatted. If you got an error trying to format an unformatted disk, this tool will not work
2:33, I typed in clean and got a response that the disk was successfully cleaned. After typing "create partition primary" I didn't get a response at all, almost as if it expects me to enter something else after that. However, the bigger issue is that even after cleaning the disk, the disk is still not cleaned or formatted. I have data on it which is accessible and works fine, but it won't work in my GoPro anymore. No way to format it.
the disk check could not be performed because windows can't access the disk
Error in cleaning. I can see files on one mcsd card. And I can delete all files except 3.(each show 0 in size) But when I remove the card and reinsert, all of the files are back. I've tried on 3 pcs, with the same results.
not working
I tried the method you used using the command prompt. I was able to do everything up to the format command. When I typed in "format fs=fat32" I got the following error message:
"DiskPart has encountered an error: The system cannot find the file specified.
See the System Event Log for more information."
How can I get this flashdrive formatted? (I previously had one or more Linux files on it.)
Try it into capital only the FS=FAT32
Hello i have tried this method several times but it still not working
windows says it cannot access my external ssd when I click on tools and check. now what?
what about fs=ntfs instead of fat32?
Nope.....not working bro
It didnt work for me
Tried the 2nd choice (command prompt). It went to "100 completed. Diskpart has encountered an error. The parameter is incorrect. See the system event log for more information". Still unsuccessful. Please help.
Ya even I am facing same issue ...please help us in resolving this ..
both methods dont work for me
For those who had errors Try it into capital only the FS=FAT32
I dont know how to repair my raw flash drive ,cant format ,cmd dont work ,disk recovery dont work ,disk management dont work.
I just need to format my 128gb of storage ,is anyone knows ,yeah full format
If its a dvd ?
Both doesn't work for me got stack at clean
my drive won't move from 0 percent progress
I got all the way up to "create partition primary" and I got nothing after that. What's up!
Is your SATA cable connected to the drive?
YOU ARE MY HERO
Useless - if Windows can't format the drive nothing you suggested will work as the drive is RAW and not viewable by anything windows produces
Neither method worked. I think my usb stick is broken. I have to get another one now
If it's an sd card and cant be formatted and it's not write protected, it means it reached the end of life and the card controller set it to read only to avoid data loss
I have this problem with a brand new micro SD card. Nothing works
Reading the comments, below, I noticed there are ZERO successes with these solutions. I just lost time. Hopefully, my laptop will not have further errors.
It’s Unlocated
Sorry but doesn't work
not working for me either!
They saw many problem
not working