MIRA Safety CM-8M Gas Mask | The Raid | Extended Cut
Вставка
- Опубліковано 23 жов 2022
- Purchase Link: bit.ly/cm8m-full-face-respirator
MIRA Safety is proud to announce the official reveal of the CM-8M tactical full-face respirator.
This is a next-gen CBRN mask, specially engineered to meet and exceed the strictest military requirements. Thanks to a unique new visor design, it provides unparalleled visibility combined with optics compatibility, along with a six-point mesh head harness for maximum stability. Like all MIRA Safety CBRN gas masks, it also provides trusted protection from a full spectrum of toxic industrial chemicals (TIC) and chemical warfare agents (CWA) including chemical, biological and nuclear threats such as radioactive dust, noxious gas, vaporized pollutants and more.
Key Features of the CM-8M Full-Face Respirator:
-Contoured panoramic visor provides maximum field of view (92.5%) while preserving compatibility with night vision goggles, thermal optics and rifle scopes
-20-year shelf life
-Uses widely available NATO-standard, 40-mm filter cartridges
-Durable bromobutyl rubber construction (meets CBRN protection standards)
-Tested for compatibility with a variety of high-cut helmets
-Hypoallergenic inner mask prevents fogging, even under hard use
-Tested resistance to mustard gas penetration for nearly 30 hours
-Fits up to 2 standard 40-mm 1/7” NATO filter cartridges (widely available with varying protection levels)
Can be used with a single filter on either side to ensure proper cheek weld for left or right-handed shooters
-Comes with a pre-installed hydration system and canteen
-Compatible with CamelBak water bladders with a Type A or M adapter (not included)
-Compatible with MIRA Safety gas mask microphone (sold separately)
-Compatible with MIRA Safety gas mask replacement parts kit
-Conforms to European quality and sustainability standards, marked with the CE symbol
-Meets all requirements under EN 136:1998, Class III
-Complies with all standards under EN 168 for impact protection, making this the perfect mask for riot control situations
-Carries MIRA Safety’s special 5-year manufacturer warranty
-Manufactured in the Czech Republic - Розваги
Bro they overkilled dat homie in the car 😂
Hey listen, they said "stop"
@@MIRASafety the hell with that "No quarter shall be given"
@@MIRASafety "Look, I washed for supper!"
RIP THE HOMIE
came here for a product review and got a movie😂cant complain
Haha, what can we say? We love to entertain
@@MIRASafety.. Some say you're more about entertaining than selling high quality safety products.
Is there anyway one can check the "legitimate side of MIRA ?" Is your products safe and reliable for use ? Are you/your products certified ?
Thanks Mira for the quality equipment.
Any time! Glad we could help
@@MIRASafety :) ill be back!
@@MIRASafety cant wait to see your gas masks in stalker:shaow of the zone!
Looks great, I'm going to get one and prepare myself for the apocalypse too just incase..
AP TAC number 1 !! 🔝 🤙🏻
Damn, what a movie 👍🏻
Thank you! Our partners put a lot of work into this one.
Bro was watching cat memes
He was caught slackin
@1:46 Watching cat videos on the shift 🤦🏻♂️😂
He's got his priorities right
Idk if this is an ad for a gas mask or war crimes the way the light up my guy
Both 💀
Hey man, they said STOP
No way they made that scientist use an Axon mask 💀. That's just foul bruh, you did them dirty 😭😭😭.
where do i get the profilm cut specifically for cm-8m?
We will be releasing this early next year
update on cm-8m profilm?
I'll try to buy this mask at my birthday lol
Nice, it'll make an awesome gift
GET THEM BACK IN STOCK DAMNIT.
We are expecting stock either at the end of this month or the next
I liked how they just threw the cm-8m in the trash here
What are you referring to exactly?
Hopefully we get them before the nukes start flying
Certainly hope so!
Just a friendly reminder that unless you are running a full MOPP suit the radiation and fallout will still get ya
@@ksirregularsyea no. Even with a full MOPP suit, gamma will still get your ass. You need several feet of concrete or several inches of lead
Can you connect an oxygen tank to this?? I only bought this and two filters 🤔
I wouldn’t recommend it. But…if you’re going to…
Determine the Thread Type: Most modern military gas masks use a 40mm NATO threaded connection. Make sure your gas mask has this type of connection and that any adapters or hoses you buy are compatible with it.
Purchase a Suitable Adapter: You'll need a specific adapter that connects the 40mm thread of your gas mask to a hose. This adapter will replace the canister filter and will provide a way to connect the mask to a long hose.
Acquire a Compatible Hose: After the adapter, you'll need a hose that's long enough for your intended use. One end will connect to the adapter on your mask, and the other will connect to the gas tank or external air source.
Regulator and Air Source:
If you're connecting to a compressed air tank, you'll need a regulator. This device will control the flow of air from the high-pressure tank to a breathable and safe pressure level.
Ensure the air in the tank is breathable air (like compressed atmospheric air), not just any gas.
Safety Checks:
Check for leaks by listening and feeling along the hose and connections.
Ensure the air flow is consistent and the regulator is functioning correctly.
Always use equipment rated for breathing. This is not a place to cut corners or use parts not designed for life support.
Training: Before using this setup in any real-world or hazardous environment, practice with it. Learn to connect and disconnect everything quickly, understand how to adjust airflow, and ensure you're comfortable with the system.
Maintenance: After each use, make sure to inspect all components for wear, damage, or degradation. Regularly check hoses for cracks, connectors for wear, and the regulator for proper function. Clean and store everything properly.
Warning: This is a high-risk setup if not done correctly. Using a gas tank for breathing requires knowledge and understanding of the risks involved. Improper setup can lead to serious injury or death due to asphyxiation or inhalation of contaminants. If you're not trained or familiar with this kind of equipment, then there’s a high chance you’re fucked in a scenario where you need it.
who are the italian actors/guys?
Know that voice.. 😉
Phew. You got this to us just in time. Potato biden hasn't gotten us nuked yet.
This rated for Ionising radiation?
No it is not, and really nothing you wear is. For that you would need to seek thick barriers or a shelter.
What did bro do to get shot that many times
Coming 10/26 right?
Correct!
When is it coming back in stocks I Wana buy it 😂
Currently, the CM-8M is undergoing a redesign of a small part. It was found that the inner oro nasal cup, while functional, did not fit some users' faces as tight. We are fixing this now as we speak and conducting in house quality control test. Once this is done, it must be mass produced at the factory. If everything is in order, the mask will be available in approximately 2-3 months.
@@MIRASafety what if I’ve already purchased one? Would that newly designed part available separately?
all i know is i'm about to standu-p elziebath; here goes east carolina