Very helpful video. I was big into b-series swaps back in the early 2000 but got out of the seen years ago. I’m thinking about getting back in and I’m lost lol. Much appreciated.
Keep it up brother !!! Bless for you and your channel always!!! Keep it up with the content , great channel been following this build for while since it was d series to now k swapped!!!
@Lekendrick Thomas not sure where you're located. But pennsylvania & new jersey have a lot of shops that'll do them. Looking at $2500 to $4k in labor from what I've researched . Then tune is extra $
One thing to note, you said the K series have immobilizers, but I’m pretty sure that’s actually just the k24 where you have to worry about that. If you get a k20a2 from an 02-04 rsx type s, you can use a PRC ecu & there is no immobilizer.
Yesss let’s go bro love the content always ❤️🙏🏽🤙🏽 Ps the s2k still lookin like a snack 😘 Appreciate the vid bro the b series vid really helped me when I was doing my b swap ❤️
Can you put a k24 out of an accord with engine, trans, ecu , and engine harness all from same car an put it in a 99 civic and then get the conversion harness that goes from the ecu to the drivers side dash ? Or will there still be an issue with the stock ecu ??
Yeah the water pump housing at 7:00 is because it’s a JDM version you can take it off and replace it with a USDM pump housing. If your alternator goes out with that housing on it you might be fucked since the USDM alternators different than the JDM.
If your transmission has a b series style speed sensor in the rear of the transmission all I think you need is a good oem sensor. Cause I’m running the same transmission in my eg and at first I thought I needed a converter but in reality I just needed a good oem sensor and my tac started working perfectly
Is my 99 dx coupe considered an ek? Sorry I’m new to this Honda world and I’m tryna k-swap my car but I’m tryna figure out parts and things of that nature
I have a 99 Honda Civic that I want to do a kswap And I also got a 05 Acura type s the entire car does anybody know if it would have everything that I would need to do a kswap first time trying to do a swap any fee back will help thanks
This was one of the least informative kswap videos ever made, harness issue? non existent, mounts ? already there apparently but Coolant shit and brake booster yeah absolutely need changed for a swap 😂
Anybody ever need this done in Rhode Island and Massachusetts I am your man I can build wire harnesses and put these engines in with no problem I have done it to an Integra a 95 Civic a 2003 Honda CRV manual swap to
You can use a accord k24 tb if you keep the rbb intake manifold. No adapter needed. 10 bux at the junkyard
Very helpful video. I was big into b-series swaps back in the early 2000 but got out of the seen years ago. I’m thinking about getting back in and I’m lost lol. Much appreciated.
Keep it up brother !!! Bless for you and your channel always!!! Keep it up with the content , great channel been following this build for while since it was d series to now k swapped!!!
I got a quote for $2500.00 . To drop a shell off & and all parts to the shop. That includes a tune. Fair deal ? What you think?
Where???
@Lekendrick Thomas I believe is was Rolo tuning in Harrisburg PA. I went a different route, and bought a new mustang gt.
@@goldentrucker7921 I can respect that. I’m trying to find somewhere to get my Honda built.
@Lekendrick Thomas not sure where you're located. But pennsylvania & new jersey have a lot of shops that'll do them. Looking at $2500 to $4k in labor from what I've researched . Then tune is extra $
@@goldentrucker7921 I’m located in Memphis TN. I don’t feel labor is a problem. It’s more so of parts I’m concerned about.
RBC manifolds are great for the dyno and 7k+ rpm but the RBB makes better midrange from 2-6.5k rpm.
Thanks for this bro 💯🤘🏽finishing up my homies em1 this month this helped out with some things I wasn’t sure on !
One thing to note, you said the K series have immobilizers, but I’m pretty sure that’s actually just the k24 where you have to worry about that. If you get a k20a2 from an 02-04 rsx type s, you can use a PRC ecu & there is no immobilizer.
Why not standalone ecu ?😅😅
Could you just move the shifter tower further back? Is there enough slack in the cables?
11-15 Honda civic SI for the RBC intake manifold and come with a k24Z7
It’s 2024 and these boys still rocking a stock accord intake manifold lol smh living up the channels name
It was a hybrid racing intake lol
Is there a video of how you did the fuse box and battery relocation looks really good love the content brother keep it up 🫡🫡🫡
Great video, yes please do a video of cost estimate on your swap along with any additional costs on upgrades!
Can you drop the parts list and links to everything? I wanna follow your build
I remember Vtec Academy had done a decent video on all the parts required to do a k24 swap. Check there channel.
yes bro u gotta make a cost vid
You should’ve put links in the description for the parts you bought to make the k swap
I can’t get much mounts here in South Africa, either they’re too expensive or unavailable. Could a k swap be done with fabricated mounts?
Yesss let’s go bro love the content always ❤️🙏🏽🤙🏽
Ps the s2k still lookin like a snack 😘
Appreciate the vid bro the b series vid really helped me when I was doing my b swap ❤️
So much room for a turbo back there 👀
For the Speedo you have to switch the pinouts of the harness that plugs up to the speed sensor
Switch out the pin outs how ?
Did my k24 hatch about maybe a year ago ,doing my integra next week
Eibach 2022 is gonna be lit
Can you put a k24 out of an accord with engine, trans, ecu , and engine harness all from same car an put it in a 99 civic and then get the conversion harness that goes from the ecu to the drivers side dash ? Or will there still be an issue with the stock ecu ??
As long as you have the right ecu for the engine and the conversion kit the chassis look should work. Not sure if that answers your question but
Yeah the water pump housing at 7:00 is because it’s a JDM version you can take it off and replace it with a USDM pump housing. If your alternator goes out with that housing on it you might be fucked since the USDM alternators different than the JDM.
If you have kpro v4 you can change the setting in your kpro to read the transmission speed sensor correctly. No need for a conversion harness
Shout out from San Diego!!
I have a 2001 civic ex. Is this gen still easy to kswap? I already purchased a 6 speed rsx type s manual trans (x2m5). Looking for a k20a2 currently
How much did this build cost for you?
HOW DID YOU ADAPT THE CENTER FRAME OF THE NEWEST CIVIC RADIO?
Where did you get the swap kit from bro
Did you buy your kit from ktuned? I have a 00’ civic I’m trying to k swap in the next couple years
You got a link to your engine harness?
ur paint is so clean i like it
Maxspeedingrods has a shifter that looks just like the k tuned shifter but for way less
hi. if i want k swap in my ek i anyway need hondata computer? i cant use stock computer?
Wassup man remember me😎🤙✅ OG fan 👍👍👍👍🤝
you said conversion harness can you use stock ecu
How much did you end up spending ? On full K swap with out motor & trans ?
People tell me 8-12k
stock no mods
If your transmission has a b series style speed sensor in the rear of the transmission all I think you need is a good oem sensor. Cause I’m running the same transmission in my eg and at first I thought I needed a converter but in reality I just needed a good oem sensor and my tac started working perfectly
How you wire up conversion harness to ecu can you make a video?
The vss Frequency is adjustable through hondata
Do a total cost video
Will the immobilizer bypass work for any k series ecu
Is my 99 dx coupe considered an ek? Sorry I’m new to this Honda world and I’m tryna k-swap my car but I’m tryna figure out parts and things of that nature
Im k swapping a dx too im almost finished with mine lol ive done alot of research
Its the same thing i believe its like under the same trim as an ek kinda how you have. An accord ex or lx yk but its still an accord lol
Is thst your old blue coupe?
How come you don't use kpro to control the radiator fan?
Do you have a link for your eBay harness? And are you having any issues with it ?
Do you have the link for harness
Sedan would be the same?
Nice work bro
Lmao that shit started up like a lawn mower
Do you need an eg subframe??? And what kind of wire harness?
You don’t need an eg subframe he says it in the video I think. But using an eg subframe is better due to weight
How do you make the head lights work?
what you know about Hush
Perfect swap
Which foamer did you have on that hose ?
Not sure, I got it a while back at autozone
Hey bro is your engine a rbb 3 ?
I have a 99 Honda Civic that I want to do a kswap
And I also got a 05 Acura type s the entire car does anybody know if it would have everything that I would need to do a kswap first time trying to do a swap any fee back will help thanks
Did you get your answer cause I’m literally doing the same thing I I also had the same questions
So custom axles ?
Just asking if k24a3 rbb3 head tsx tranny 6 speed what kind of shifter cable i need
Anyway you can send me your shopping list lol. I have a 99 hatch and am buying a k20
Finally, someone we can relate to vs all the other guys who don't want to "sting the budget". Stfu bro, you got like 20gs into that k swap smh lol
What about the fuse box?
What basemap did you use for your k24a? On kpro
It’s a stock tsx on 91 basemap
@@BrokeBoyAndy bet thank you 🙌🏾
👍
Bruh!
I DM'd you a link about the Bluetooth
for the Radio delete. Check your Instagram...and, Thank a Sista later. Lol
Great Stuff!
paint color code?
Cost estimate ?
Animo compa
♨️♨️♨️💪🏽💪🏽💪🏽
I’m 7k deep in my swap already
What’s left
🔥🔥🔥
why dont you just flip your shifter
YESSIRSKI
It be them weirdos who don’t like the video
💯💯💯
Who cuts there fire wall to pass the shift cables ??! Lmao , the car is pretty clean but that looks awefull : /
If you live in Cali it's not even worth it unless it's just a track car
Orale
What wheels are those?
This was one of the least informative kswap videos ever made, harness issue? non existent, mounts ? already there apparently but Coolant shit and brake booster yeah absolutely need changed for a swap 😂
I gave a thumbs down because I don't miss the s2k.
Anybody ever need this done in Rhode Island and Massachusetts I am your man I can build wire harnesses and put these engines in with no problem I have done it to an Integra a 95 Civic a 2003 Honda CRV manual swap to
Hoe hard is it to kswap a suv
Question, can I use the ek brake booster but just get fittings for my k series so it can adapt and go to that?
What front bumper are you running?
What type of axles do you have?
Anyway you can send me your shopping list lol. I have a 99 hatch and am buying a k20
🔥🔥🔥
Anyway you can send me your shopping list lol. I have a 99 hatch and am buying a k20