How to Overcome Challenges in Metal Fabrication Like Pro | 1974 international scout II

In this video Tubal Cain fixes the rear window hatch on the 1974 international scout. the hinges ripped the mounting plate right out of the sheet metal, and Tubal takes you along while he fixes it good as new!
check out my website - beametalfabric...
Eastwood 10% off discount code! "NATHAN10"
@eastwoodco
Cleco Fastener Kit- amzn.to/44LehG7
Makita 16 Gauge Shear-amzn.to/44L7Cvl
Cut off wheel - amzn.to/3OyDUUO
36 grit Roloc -amzn.to/3YdloEF
Strip disk -amzn.to/3Qoh2IO
#classiccar #metalshaping #customMotorcycle #DIYMetalwork #BobberFenderBuild

[@NMZIA]

This channel is so underrated

[@Jtown505]

Awesome to see you do something that looks complicated so easily. You are a master at your craft!

[@y0riai.]

Thanks for the video mate. I repaired the cab corner of my chevy s10 following the instructions of your videos. Thanks for sharing the knowleadge.

[@BeAMetalFabricator]

Awesome brother! Glad to hear that I can help you keep the project alive! If you have any questions don't hesitate to ask bro I'll help however I can

[@danielboughton3624]

Excellent overview of a common problem with door stops, hinges, etc.

[@BeAMetalFabricator]

Awesome! After posting is when I realized this was a common problem

[@dynomax7497]

Excellent, many thanks for posting. Nice to see real-world type repairs.

[@BeAMetalFabricator]

😎👉

[@TheMetroscout]

I watch all of your videos but as a Scout Guy this was especially great to see. Thank you for sharing and teaching.

[@BeAMetalFabricator]

Dude thank you for watching all my videos! Confirms that I'm doing something right! Much appreciated

[@DanielForrest]

Your tutorials are great but watching you work is just as good!

[@BeAMetalFabricator]

Cool I'm glad you liked it! A little bit different but still has some good information I feel. Thanks for watching!

[@bdpgarage]

That kinda stuff it cool to watch and learn from.

[@scottmoto]

The master patch man! Damn good fabrication. Don't sell yourself short....it was an instructional video for sure. Thanks for sharing.

[@BeAMetalFabricator]

Thanks Scott! I appreciate you man!

[@scottmoto]

@@BeAMetalFabricator No problem. I am real and genuine. 🤘

[@JonDingle]

As you correctly said "tricky", getting the positions marked up on your own and with nothing to hold the upper tailgate in place and then fitting it on your own. Sometimes it is not the repair work but the measuring and refitting that make the job difficult and time comsuming. Here in the UK, we sometimes refer to split tailgates as a "Cat Flap" tailgate because the top opens like a cat flap! Excellent work as usual young man.

[@BeAMetalFabricator]

Thank man I appreciate your support!

[@bigsquatchsasfoot1964]

Super job dude 👌 bit of an awkward one especially on your own but turned out perfectly I never doubted you for second lol nice one 👍

[@BeAMetalFabricator]

Hahaha right on! Yeah putting it on by myself was the hardest part 😂😂

[@jakeatencio305]

It’s awesome seeing the process

[@BeAMetalFabricator]

Thanks Jake!

[@1967250s]

Solid work, man. Be sure to go back and rust proof that sucker.

[@charileross1986]

You are a craftsman and that was awesome fact.

[@BeAMetalFabricator]

Thanks dude! 😎👉

[@paulnewton943]

Tricky. Hah! Down right awkward and exhausting. Said never again has to be a better way. Not if the master also does it this way. Thanks for sharing mate.

[@BeAMetalFabricator]

Haha thanks for the kind words brother!

[@kevinmartin5489]

Great job.

[@bernardmauge8613]

nice work.I enjoyed watching.

[@BeAMetalFabricator]

Awesome! Thank you!

[@bernardmauge8613]

@@BeAMetalFabricator you are most welcomed

[@toddenglert4815]

You knocked it out bro

[@BeAMetalFabricator]

Yeah I got it done! 👍

[@Jtown505]

Thanks!

[@BeAMetalFabricator]

Your the man!!!

[@FuzzyRSK]

Not a how to but good info on how to improvise with angle iron. I think a lot of us get it in our heads that we need fancy tools to fabricate. But a couple of clamps and something with the right contour works just as well. Thanks

[@BeAMetalFabricator]

Thank my friend!

[@AceC0bra]

Nice job again ! Thx for the vids

[@BeAMetalFabricator]

Thank you for your support in checkout the videos! 🙏

[@MAGLtd-hh3ct]

Another scout door lives for another day! Nice work Tubal, was that the only thing that needed to be done on the scout ? Seems to be in pretty good shape, and also see you jammed the delivery truck, you also spray in your shop?
Thanks for taking the time to put this together for us, always enjoy watching your skills at work,👍🇨🇦Ricky.

[@BeAMetalFabricator]

Thanks Ricky! Yeah that's all the customer wanted done. I'm pretty sure he is going to try to sell it. The body is in great shape! But it don't run or anything yet it needs some TLC. Also yeah I got the Metro jammed so we can put glass in it. I'll do some body work now and then but as far as a full paint job , I send it to my buddy William to put the color on.

[@rgl_motorsports]

Very common on the Scout II

[@BeAMetalFabricator]

Good to know! Thank you!

[@ronnym1977]

Nice work Tubal.
I wanted to be there to hold that hatch in place for you when you were installing it.
I'll bet that was a bitch!

[@BeAMetalFabricator]

Hahaha that's was the hardest part of the whole job😂

[@erbthatsright1103]

Comment for the algorithm.

[@BeAMetalFabricator]

Thanks bro!!!