Mine came out surprisingly well! Much better look that buying caps and the cleanup was super easy. I used one of those plastic liners from Walmart for $2 and just cut out a square for the emblem. Might have been overkill but ensured no overspray on the car. Thanks for the video, love the stuff you put out man!
I'd stay away from auto car washes and keep pressure washers from hitting it directly. You'll get a couple years most likely - give or take some time depending on your weather conditions
We don't, but if applied correctly with multiple coats, you should be able to easily peel it off. If not, you may need dip dissolver like this one www.amazon.com/DipYourCar-Dip-Dissolver/dp/B00EKS5FJO/ref=sr_1_5 This article talks more about peeling vs dissolving plasti dip - www.thedrive.com/cleaning-detailing/38270/how-to-remove-plasti-dip
Not if it was applied properly. Even though it's a temporary coating, it's pretty durable. Here are some ways to avoid damage: Apply multiple thick coats to ensure durability and ease of removal. Avoid using harsh chemicals or pressure washing directly into it. Handle objects or tools near the coated area carefully to avoid scratches or tears.
You can also use vinyl. cut the vinyl 2mm straight line, wrap it around the side of emblem, trace the logo with pencil, and cut the logo into shape. it will seemlessly cover everything and user friendly
I don't recommend auto car washes because it can be a bit harsh. I would hand wash your car and be gentle around the dip areas, like don't pressure wash directly on it
If it's PPF, it' fine. If it's ceramic coated, plasti dip won't work. Same process for front and rear logos. Same steps on wrapped cars, just be careful. One can is plenty for both logos.
Can this be removed as needed? I leased a M3 and thinking of getting the chrome logos plasti dipped. Since it’s a leased car, I can’t do drastic modifications
Yes, you can take plasti dip off! You can also do any wraps on the exterior and/or interior bc they can be peeled off too. So plasti dip, vinyl wrap, ppf - all okay to do
I would take it off and start over probably. You could keep it on and follow the steps in the video, but you'd end up with uneven spray. If that doesn't bother you though, then yes, this would work
Are you removing the logos to PPF? If that's the case, I would plasti dip them when they are off the car and then put them back on after it's PPFed. If you're PPFing around the logos, you can do either way but I would plasti dip before
For the handles, i'd recommend vinyl wrapping them. But it would be the same concept as the logos. Just do light coats and that'll ensure it'll be easier to peel later on.
Will this work on vinyl car wrap? Or I’m assuming they will remove the emblem before they do the wrap? If that’s the case I’ll prob just have it painted (regular paint) wonder how hard it is to remove the emblem and then re-attach it
@@tesbros Apparently putting the plast dip can in warm water helps with the rubber paint evening out better during the drying process for each layer. Not gonna plug another channel in your video but its definitely around in the YTverse!
Typically your emblems aren't going to have PPF on them, but maybe your car underneath the emblems has PPF? That's totally fine to plasti dip on top of. It'll actually make it easier to peel off around the emblem! But if you want to plasti dip on a PPF surface, it might not stick very well or stay on very long. Especially if it has hydrophobic qualities.
Now I'm kind of scared to do the plastidip on my Tesla Emblems because I have ppf on the hood. Does this peel off of the PPF like it does on the paint?
It works and looks great but durability is bad and to “repair” the areas where the plasti dip comes off requires you removed the entire plasti dip from logo or it will cause an uneven look. I say buy a logo cap
@@tesbros Thanks for the quick reply. Yes, I am thinking to do the PPF myself. It would make sense to remove the logo and install the PPF. But I am not sure whether the logo would stay firmly on top of PPF. Any idea?
@@pencilsfxc yeah, it’ll stay no problem! That’s how I always do it. You can buy the kits that come pre-cut around the logo but they don’t look the best in my opinion
@@tesbros Good point! I am thinking to get the pre-cut PPF and the logo is cut out on the PPF. Therefore, I don't need to remove the logo. I will install the PPF and then plasti dip the logo on top of the PPF.
The fact that so many of your products have install templates really sets you guys apart. Keep up the good work!
Nice informative video, but the two last coats should be a lot heavier, makes the peel and finish a lot better
Can you do the Tesla word on the trunk as well same method?
Yes!
Slower passes, laying wet coats after the 2nd cost to avoid orange peel and for easier peeling.
Doing this to my Model Y’s Gemini wheels today! Love watching you guys.
We appreciate it Carlos! We will continue to provide more resources for the community.
how did it turn out?
Mine came out surprisingly well! Much better look that buying caps and the cleanup was super easy. I used one of those plastic liners from Walmart for $2 and just cut out a square for the emblem. Might have been overkill but ensured no overspray on the car. Thanks for the video, love the stuff you put out man!
Does it last?
@@dypdyp been lasting like a champ for me.. power washed, rained on, left in sun etc.. none has come off
great, thnx for sharing 👍
Dude that's a simple but great tip! I've been worried about the overspray.
Great technique! How long does it last though, especially if I am taking my Tesla to automatic carwashes?
If you say away from brushes you will probably see 2-3 years, depending on how harsh the winter is where you are
I'd stay away from auto car washes and keep pressure washers from hitting it directly. You'll get a couple years most likely - give or take some time depending on your weather conditions
Do you have a video on removal process?
Removing the plasti dip or the emblem?
@@tesbros the plasti dip
We don't, but if applied correctly with multiple coats, you should be able to easily peel it off. If not, you may need dip dissolver like this one www.amazon.com/DipYourCar-Dip-Dissolver/dp/B00EKS5FJO/ref=sr_1_5 This article talks more about peeling vs dissolving plasti dip - www.thedrive.com/cleaning-detailing/38270/how-to-remove-plasti-dip
Thank you! Appreciate it
if you take a finger nail to this, will it scratch off?
Not if it was applied properly. Even though it's a temporary coating, it's pretty durable. Here are some ways to avoid damage: Apply multiple thick coats to ensure durability and ease of removal. Avoid using harsh chemicals or pressure washing directly into it. Handle objects or tools near the coated area carefully to avoid scratches or tears.
Can I do this with my hood already ppfed and ceramic coated?
Yes! If your T is also ceramic coated though, that will make it harder to adhere
You can also use vinyl. cut the vinyl 2mm straight line, wrap it around the side of emblem, trace the logo with pencil, and cut the logo into shape. it will seemlessly cover everything and user friendly
so if you go from top to bottom direction, is that one coating? Or top to bottom into bottom to top into left to right into right to left = 1 coating?
The first one!
Did you wait 10 mins to let it dry after each coat? Or just after the first initial
Yes. You want to wait between each coat.
@@tesbros Thanks!
Could I use plastic dip on the wheel cover.
Yes
Good technique. I was surprised to see it not tear into the logo. Good job.
It did. Look closer.
@@dicktracy5066 👀
It is 30 minutes after all the 6 coats, right?
Before peeling? Yes, as long as it's dry to the touch and will have like a rubbery feel. Wait longer if you're uncertain
Best to cut the borders before removing the contours.
With what? Box cutter? 😂
If we go at the car wash , it’s doesn’t come off ?
I don't recommend auto car washes because it can be a bit harsh. I would hand wash your car and be gentle around the dip areas, like don't pressure wash directly on it
Wait.. How come the coating didnt come off the logo when you peeled it????
Just have to be careful around it
Does it last for a decent amount of time or start to peel off after few washes? Trying to decide between Plasti Dip or just remove/replace emblem.
It’ll last for a while! just be careful using a pressure washer on it
Can this be done on the Dual motor emblem in the back of the car?
Absolutely. Same process. Grab several tooth picks.
Do you know if plasti dip will stick on top of ceramic coating?
Not as well but worth a try. Also depends on the ceramic coating and also how long it’s been on the vehicle.
Any additional steps/precautions if your car is wrapped? Is one can enough for both front and back logos?
If it's PPF, it' fine. If it's ceramic coated, plasti dip won't work. Same process for front and rear logos. Same steps on wrapped cars, just be careful. One can is plenty for both logos.
What if we have ceramic coating on top of ppf..Will it work?
Can this be removed as needed? I leased a M3 and thinking of getting the chrome logos plasti dipped. Since it’s a leased car, I can’t do drastic modifications
Yes, you can take plasti dip off! You can also do any wraps on the exterior and/or interior bc they can be peeled off too. So plasti dip, vinyl wrap, ppf - all okay to do
Would you use a metal cricket tooth pick? Would it scratch the car?
There's definitely a chance it could scratch the car. I would stick to softer things
Can I ceramic coat over the plasti dip???
Yes!
Is this carwash resistant? How about hand carwash?
Yes once it’s fully dried and in place, you can hand car wash.
Hi, if the back emblem have been plasti dipped and I am touching up some of the edges, do I follow the same steps in the video?
I would take it off and start over probably. You could keep it on and follow the steps in the video, but you'd end up with uneven spray. If that doesn't bother you though, then yes, this would work
@@tesbros suggestions on most effective way to remove it from the “dual motor” badge? Not liking the color I chose.
You should do pillar delete ~ white teslas with black pillars looks good~~ probably what I’ll be doing when I get mine this week
For sure! We have a pillar delete kit if you’d rather use vinyl instead of plasti dip - tesbros.com/products/pillar-delete
I want to buy your products but I’ll probably end up ruining it trying to install lol
@@buystuff9804my friend here in Netherlands bought and installed it from our local distributor of Tesbros. Did a 99% good job.
Can you do this with PPF covered tesla?
Yes!
Great video! Q: Is one can enough for both Front and Rear logos plus 'Dual Motor'?
Yes
You can also plasti dip the wheel hub caps. Search UA-cam for a video on it.
How does this handle being pressure washed?
Also would like to know this
will one can be enough for the front and back emblem?
It'll be good for one emblem. I would get two cans to make sure you get both covered.
If you we’re going to PPF would you paint the logos before or after? Great video makes me more confident about painting
Are you removing the logos to PPF? If that's the case, I would plasti dip them when they are off the car and then put them back on after it's PPFed. If you're PPFing around the logos, you can do either way but I would plasti dip before
@@tesbros gotcha, thank you!
How would you dip the chrome door handles?
For the handles, i'd recommend vinyl wrapping them. But it would be the same concept as the logos. Just do light coats and that'll ensure it'll be easier to peel later on.
It seems the biggest hassle would be from doing the dual motor letters.
Yes, for sure. Another option is you can buy them black and replace the chrome emblems
Will this work on vinyl car wrap? Or I’m assuming they will remove the emblem before they do the wrap? If that’s the case I’ll prob just have it painted (regular paint) wonder how hard it is to remove the emblem and then re-attach it
Yes if it’s color wrapped, it should be removed. And painting is a great idea if it’s already being removed!
What happened to floating the can in hot water before spraying?
I haven't heard of that one! 🤔
@@tesbros Apparently putting the plast dip can in warm water helps with the rubber paint evening out better during the drying process for each layer. Not gonna plug another channel in your video but its definitely around in the YTverse!
Can plasti dip be apply on ppf?
Typically your emblems aren't going to have PPF on them, but maybe your car underneath the emblems has PPF? That's totally fine to plasti dip on top of. It'll actually make it easier to peel off around the emblem! But if you want to plasti dip on a PPF surface, it might not stick very well or stay on very long. Especially if it has hydrophobic qualities.
Now I'm kind of scared to do the plastidip on my Tesla Emblems because I have ppf on the hood.
Does this peel off of the PPF like it does on the paint?
Yes, peels off the same if not better
Did it on MY. Lesson learned: Easy, but Don’t be in a hurry. Let it dry before peeling.
great advice!
I was too scared to do plasti dip so I just put cover over I bght at Amazon 😅
That's fair! Glad you blacked it out though! Looks so much better.
great. thank you for sharing this tutorial. useful. Regards.
How does this hold up in extreme Florida hot summers?
On the spec sheet for Plasti Dip, it says it's heat resistant up to 200 degrees F
That peel job didn't look like the edges turned out well. There were more boogers on that logo than a 3rd-grade class photo.
😂 My pick tool broke just as I was starting the job. But the show must go on. Better luck to you! 🤗
What color is your Tesla? The old silver or a custom job?
the OEM silver
It works and looks great but durability is bad and to “repair” the areas where the plasti dip comes off requires you removed the entire plasti dip from logo or it will cause an uneven look. I say buy a logo cap
Do you peel it off and redo when it fades out over time?
This actually lasts quite a while so if it’s fading, try more coats. But yes, you can do that as well.
I dont like how it has a texture. I took mine off, sand blasted them then spray them with satin black.
Plasti dip does not have a texture, if you have a texture you sprayed it incorrectly.
How long did you wait inbetween coats? I’m doing mine right now and waiting for the first layer to dry and I saw this video haha
They recommend 30 minutes, but I find that 10-15 min between each coat is enough. Wait roughly 30 min at the least before peeling.
@@tesbros dope I wait 15 in between coats on my third coat right now haha
@@VinsanityB7 go light on those coats! That’s the key
That is great! Thank you
You bet!
Nice
should probably wear a mask and some gloves. Other than that, great tutorial.
Not a bad idea! Thanks for watching.
Nice Video, I also want to install PPF. Should I plasti dip the logo first or PPF first? Thanks.
I would PPF first. The shop will have to remove your logo to PPF and the plasti dip could get damaged in the process
@@tesbros Thanks for the quick reply. Yes, I am thinking to do the PPF myself. It would make sense to remove the logo and install the PPF. But I am not sure whether the logo would stay firmly on top of PPF. Any idea?
@@pencilsfxc yeah, it’ll stay no problem! That’s how I always do it. You can buy the kits that come pre-cut around the logo but they don’t look the best in my opinion
@@tesbros Good point! I am thinking to get the pre-cut PPF and the logo is cut out on the PPF. Therefore, I don't need to remove the logo. I will install the PPF and then plasti dip the logo on top of the PPF.