Cool build! If you need an easy way to pollish tiny little detail parts, i cut little discs of scrap cloth, and put them on the same holder as for the dremel cut off discs, jean fabric and felt work well, then you can charge with same polishing compound as youd use on a cloth wheel on the bench grinder, they work great for tight spaces, and are basically free. And as we all know, all the good flap wheels and other grinding consumables of good quality are getting $$$ these days, hah.
Everything looks great. I would recommend to reinforce the wheel pivot-to-fork tube joint with a partial radius via tubular sleeve to diffuse lateral forces on the butted-weld sheer line. The weld looks decent, fusion is probably not an issue but it looks like you didn't wrap the welds/tie-in all the way around the tab and that gap is a potential failure point where vibration/ and directional torsion/side -loading/compression can occur and generate a crack in the weld. Hope this message finds you well.
Thats a fun looking build. Please do large sections of the video with no music and jut the workshop sounds. I like the sounds of a workshop and really dont need or want the backing music. The 5sec repeating sound clip is way too much. Maybe for a 5min video, but almost 1hr?
Howdie from CANADA 🍁 SK glad l found ya coooool build keep it up some people need to chill until they make one like this sit bk and enjoy the great work of this is enjoyable to see don't have to have a degree or rocket science test to make this so glad for ya sharing your project with us good luck 🤞 😊
I saw the video notice in my box and the first thing I saw was the Honda all jacked up I haven't laughed so hard in a long time I love it . this is going to be good when it's done
Durchaus gute Arbeit, du verstehst dein Handwerk. Bei uns in Deutschland undenkbar so etwas legal zu bekommen. Ich glaube ihr in Japan habt es da besser. Beste Grüße von einem deutschen Motorradmechaniker.
Cool build, your choice of background music might be a little monotonous for some. The home built springer front end is well done, but I’d imagine you might have more then just the front end involved with this build, let’s see all of it..
![[asmr ver]Chapter3 HONDA DAX custom project[make a front fork]](http://i.ytimg.com/vi/eEjgH3AO2Qo/mqdefault.jpg)
![[asmr ver]Chapter3 HONDA DAX custom project[make a front fork]](/img/tr.png)
気づいたら50分経ってた。
こんなに釘付けになる動画他には無い。
撮影の手間暇や作業内容を考える割に合わないと思う。
だから次が待ち遠しい。
Try 2strokestuffing
This is easily one of the coolest builds I’ve seen! I love that you’re making almost every single bit from scratch!
Already looks legendary
ありがとうございます。
バイクじゃないですけど、良い物を作りたいです。
この車両の作業動画ずっとみてられる
Beautiful record of how to hand build a custom springer front end, amazing work, thanks for filming and sharing 👍
Cool build! If you need an easy way to pollish tiny little detail parts, i cut little discs of scrap cloth, and put them on the same holder as for the dremel cut off discs, jean fabric and felt work well, then you can charge with same polishing compound as youd use on a cloth wheel on the bench grinder, they work great for tight spaces, and are basically free. And as we all know, all the good flap wheels and other grinding consumables of good quality are getting $$$ these days, hah.
apart from the weld on lower axel plates, this was awsome! cant wait for the next one!
Excellent work, that is a beautiful springer you made from scratch!
Everything looks great. I would recommend to reinforce the wheel pivot-to-fork tube joint with a partial radius via tubular sleeve to diffuse lateral forces on the butted-weld sheer line. The weld looks decent, fusion is probably not an issue but it looks like you didn't wrap the welds/tie-in all the way around the tab and that gap is a potential failure point where vibration/ and directional torsion/side -loading/compression can occur and generate a crack in the weld. Hope this message finds you well.
No worries buddy, this is not meant to be ridden. At least I wouldn´t missing a front brake :)
こういうのが欲しい。車両も技量も。続き急がず待ってます。
how can this dude be so smooth machining??? everything its calculated and results are as expected.
Wow!!! Great job!!!! Awesome workshop!!! Very good skils, combo!!
ニヤニヤが止まらなくなる😁
もうカッコいい👍
ありがとうございます。
僕もニヤニヤしながら作ってます。
Good job mate & look forward to seeing your Bike finished 👍
あなたの作品を見るのはいつも本当に嬉しいです！
オーヴェルニュ（フランス）の火山の力があなたとともにありますように！👀
outstanding fabrication super cool bike💯
Thats a fun looking build. Please do large sections of the video with no music and jut the workshop sounds. I like the sounds of a workshop and really dont need or want the backing music. The 5sec repeating sound clip is way too much. Maybe for a 5min video, but almost 1hr?
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
I agree
Agreed.
I want a million dollars, but no one will give it to me. Sometimes you have to accept what you have my boy!!
@@jamonjefferies3851 wanting a million dollars is a lot different then suggesting someone to make a video with no music.
待ってました～
シグネットの工具良さげですね
お待たせしました。DAX以外の事も忙しく10ヶ月ぶりの更新となってしまいました。
シグネットさんの工具良いですね！
自動車整備でも使う機会が多いです!
I've been waiting, almost a year's from your last video.... really nice build
superbe projet et superbe vidéo !!! merci !!
That’s going to be awesome. I like the chill music too 🤙🏻
初めてこのチャンネル観ました。
こういう「ガチのものづくり」の人は、カスタムじゃなくハンドメイドって言っても良いと思います。
応援してます！
51 mins in, I think the music is forever part of me now.
Was intrigued all the way through 👍👍👍
Howdie from CANADA 🍁 SK glad l found ya coooool build keep it up some people need to chill until they make one like this sit bk and enjoy the great work of this is enjoyable to see don't have to have a degree or rocket science test to make this so glad for ya sharing your project with us good luck 🤞 😊
Наконец-то, я уже думал, что всё, продолжения не будет.
Great work ! Cannot wait to see it finish !
ありがとうございます。
時間はかかりますが完成させます！
サムネの破壊力が凄いDAXが凄いことになってる！
ありがとうございます。
目立つことしか考えていません😄
Хорошая мастерская мне понравился очень 🏰🎩🌍🇷🇺🏍️📱🛰️👍👀👣👣👣👣👣
love that till the end. will watch again and again.
ありがとうございます😊
誰か1人でも好きな人がいるなら頑張ります。、
Terminala hermano 💪
Me gustaría saber cómo queda y como anda
Ohhh Man I had two of them 22 years ago ❤🫶🏼 in original setup naturally.
that bike is looking bad ass
見た目しか考えていません😎
いつもながら高品質な動画をありがとうございました。
個人的にはろう付けの場面が素敵でした。
今後を楽しみにしていますね(^^)
Mantap bang
頑張ります！ありがとうございます😊
Yeees, new Video. Please more from this Bike
ありがとうございます！
お待たせしました。毎日楽しく作ってます。次の動画もいつになるかわかりませんが必ずアップロードします！
что то на подобии тоже хочу сделать. главное начать)
мастер своего дела! красавчик!!!
Hope it rides safe.
JUST PURE ART
I saw the video notice in my box and the first thing I saw was the Honda all jacked up I haven't laughed so hard in a long time I love it . this is going to be good when it's done
ありがとうございます。宙吊りダックスです！
完成まで頑張ります!
Love this... nicely done
When will we see the next video I’m in vested now and need ideas for my bike great vid 😊
Dah lama q menunggu😊
横型エンジンはそこまで傾けると通常給油量ではオイルポンプに油面が到達しなくなり油圧が掛からなくなります
電動ポンプ化とかで対策できるか？ですね
頭を悩ませてるポイントです
とにかく見た目を優先し続けた結果公道は走行不可になりました。。。
Its amazing 😮😮😮😮
ありがとうございます。嬉しいです。
Not a bike guy, but yes. Keep going on brother san
その通りです。頑張ります。
Maybe you could get some engine modifications from another UA-camr, engine taro. He’s done some really neat stuff with those Honda engines
Durchaus gute Arbeit, du verstehst dein Handwerk. Bei uns in Deutschland undenkbar so etwas legal zu bekommen. Ich glaube ihr in Japan habt es da besser. Beste Grüße von einem deutschen Motorradmechaniker.
Wow amazing job
待ってました。すでに雰囲気最高で、フロント周りが潔く、素敵すぎるのですが、ひょっとして公道不可仕様に！？
ありがとうございます
雰囲気だけを求めた結果公道は不可になりそうです😅
せめてイイモノ作りたいですね！
Cool build, your choice of background music might be a little monotonous for some. The home built springer front end is well done, but I’d imagine you might have more then just the front end involved with this build, let’s see all of it..
what's the weight of this fork? it looks heavy metal )
随分長いこと待ってたよ
Super cool!
This is awesome.
I love the overall design of the bike. I hate the swing arm though. Its the biggest detraction
Quero ver o quão bonita ele vai ficar depois de pronta.
ありがとうございます。今回は綺麗なバイクにしたいです。おそらく綺麗です。
beautiful ☆彡
Not sure I'd trust my life to that smal bit of metal connecting the forks to the wheel.
플레이트 평면 연마도 안하고 3축 용접을 하면 무슨 의미가?
wow i want that tools
待ってました
its amazing
Me at start of video: wat da fuq?
Me at end of video: Fuq da wat?
Super cool
ありがとうございます😊
これで生活出来るのなら最高だね！
На сколько тонн эта вилка тяжелее заводской?😂😂😂
Needs more rake .
⭐️Now THAT Is RADICAL n COOL.
✨️WITH ❤ PATIENCE IS A VIRTUE.
🤘💀🤘
👕
🩳
CHOPPER 👟👟 LIFE
I from Indonesian 😊
このエンジンの角度はいろいろヤバそうだけど。
Hell yeah brother
溶接のシーンで目やられる…
sorry, but springer will not work at that angle
Gomu gomu
イヌイヌの実ですね。
almost a year later
that soo fckng cool
ありがとうございます！最高の物を作りたいです！
It's to long time build bro
Nice project, but tortures Audio, had to leave.
쉽게 할걸 어렵게하는 부분이?
i have a cub called legenda2 in indonesia grandson of supercub
Yo pondría de título, como arruinar una clasica honda dax 😢
😂😂😂😂😂
😎
Come back
Sorry 😔, but all i saw was a well engineered bike turned into an abomination 😒.
Какие запрещенные препараты вы колите или курите , что-бы придумывать такой чудо-юдо кастом байк ?...
The music drives me crazy, can`t look 51min to this kind of music, sorry
ASMR versionを最近アップロードしましたのでご覧頂けるとありがたいです。
Not here for the Affiliate Marketing. I think what you make is cool but not enough to buy anything I can't make myself...
Бред.
Your definitely not getting anywhere including up a hill in a hurry.
😂😂😂
Very cool homie🫡🔥🔥🔥🔥🔥
Не понятно что зачем и почему и куда и для чего , короч нет интнреса
🔥