John Deere Riding Mower Wheel Bearing Conversion Kit
Вставка
- Опубліковано 26 кві 2022
- In this video I install the Bushing to Bearing conversion kit for John Deere models D100
D120 D130 D140 etc..
This conversion is performed on a John Deere mower but is about the same for any bushing to bearing kit out there for riding mowers.
I show how to convert the supplied bearings from sealed to greasable
I installed this John Deere bushing to bearing conversion kit to prolong the life of the front axles and honestly just because I think it's a cool product. I am very satisfied with the product and highly recommend it (and it's very reasonably priced).
Neither of these are affilliate links (I don't make anything if you buy these)
Here is the Amazon link to the regular bearing kit like the one in the video: amzn.to/3bDReXz
Here is the same kit with bearings for the steering spindles. I haven't tried this yet but I plan on it because it seems like a really cool idea: amzn.to/3dnh0jc
Disclaimer:
The information contained herein should NOT be used as a substitute for the advice of an appropriately licensed and qualified professional. Due to factors beyond the control of Bubba's Workshop, I cannot guarantee against improper use or unauthorized modifications of this information. The information provided herein is for entertainment purposes only. Bubba's Workshop assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Due to factors beyond the control of Bubba's Workshop, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Bubba's Workshop. This video is for entertainment purposes only and should not be used for education or as an example on how to accomplish anything. I'm an amateur and the sole intent of this video is entertainment. Be safe and ALWAYS follow manufacturer's recommendations. - Авто та транспорт
A 3/8" socket extension works great too. That's what I used to do mine. It's a great mod. I left the seals in.
Like I said at the end of the video I think leaving the seals in is the correct choice as those bearing spins so slow the sealed ones will last way longer than the mower ever will 👍
Good vid on bearings instead of bushings.
Thanks 👍
How about a socket extension
Why couldn't you use the old bushing to install the new bearings As it's outside diameter should be the same?
Honestly I think that would work fine and I can't tell you why I didn't do that..probably just didn't think about it!
I have a S170, just wondering if same bearing conversion kit will work for my mower.
I'm almost sure they do...i believe it's a 5/8 axle. I would look on john deere parts site and see if the front wheel assembly has the same part#. I did look at a couple listings and the s170 WAS listed it just doesn't show up in the description (but if you look at details of the listing on amazon it lists 50+models it fits).
Carlisle tire and wheel tires...... I live about 16 miles from carlisle where the plant use to b in carlisle PENNSYLVANIA
I wish it was still there!
This is a fantastic demonstration of using the proper tool for the job! Unfortunately, you left out the part of about what is the correct tool after demonstrating what not to do!
The plastic handle on a screwdriver can break when struck with a hammer. The hammer can be damaged if you strike with the cheek of a hammer. As you are pointing to where the grease goes, you just pushed dirty grease into the bearing.
You need to buy better tools or quit being scared to use what you got!
I leave my sealed bearings “sealed”.
Don't ever remove the grease seals from a sealed bearing this is a stupid move. The seal is to keep the grease in and the dirt and water etc. out.
The inner seal isn't exposed to water/dirt (unless you park in a river).
@@BubbasWorkshop lol....wanna bet ?