saab 9-3 2003-2010 fuel pump upgrade FWD 2.8 v6

Поділитися
Вставка
  • Опубліковано 27 сер 2024
  • in this video I am working on a 2006 saab 9- 3 2.8 v6 turbo. I am demonstrating how to modify the car to allow fitment of an upgraded fuel pump. Once the pump is installed you will have to get the car mapped to cater for the change. I use AURA tuning who has the mapping done for this mod and can be found on Facebook
    / auratuninguk

КОМЕНТАРІ • 19

  • @dingbat5653
    @dingbat5653 Рік тому +1

    Great vid and I was curious how you actually unclip the fuel filter strainer with the flat screw driver. I couldn’t seem to separate mine.
    Explanation would be great - thank you.

    • @garymgzs280
      @garymgzs280  Рік тому +1

      It has a grip washer. So a bit of brute force and ignorance

    • @dingbat5653
      @dingbat5653 Рік тому

      @@garymgzs280 hahaha nice and I’m assuming you push on it through the slot where you can see it, correct?
      Can the washer be rotated and more like a c/e-clip?

  • @Michael-mo1lx
    @Michael-mo1lx 6 місяців тому

    Awesome what pomp was in it?? Looks the same for Vectra OPC..

  • @JRosey777
    @JRosey777 7 місяців тому

    Hi, very informative video!
    Would you know if the RHD Turbo X has the same floor plan?
    Thanks for your time.

    • @garymgzs280
      @garymgzs280  7 місяців тому

      Turbo x is totally different. You have a saddle tank with 2 senders. So under the bum of the 2 rear seat passengers.

  • @tsrfastsaab
    @tsrfastsaab Рік тому

    Can't you de-pin the connector so no butt connections required?

  • @meca13b
    @meca13b Рік тому

    Nice work !!
    Is it same for the
    2008 2.0 FWD models US spec ?

    • @billywill123
      @billywill123 Рік тому

      the us fuel pump assembly is completely different .

  • @stever456
    @stever456 11 місяців тому

    Hi, what part of the map needs altering for this pump? As its PWM control i thought it would just automatically run at the required pressure required by the ECU.

    • @MrCurseMark
      @MrCurseMark 22 дні тому

      you have any answer to this @saabmadman ? :)

  • @uodavid
    @uodavid Місяць тому

    Hello, did you upgrade your injectors?

    • @garymgzs280
      @garymgzs280  Місяць тому +1

      @uodavid hello. Yes I was running 750cc supplied by aura tuning castle combe Wiltshire. They are reasonably priced and car idles smooth.

    • @uodavid
      @uodavid Місяць тому

      @@garymgzs280 I have contacted the tunner by Facebook

  • @Michael-mo1lx
    @Michael-mo1lx 4 місяці тому

    450LHP per hour is that not to much 255LPH is good for a stock engine right?

    • @garymgzs280
      @garymgzs280  4 місяці тому +1

      255lph is lower than the stock pump . Stock pump is estimated around 300lph

    • @Michael-mo1lx
      @Michael-mo1lx 4 місяці тому

      @@garymgzs280 no way thank you I was thinking about buying the 255LPH I got the 256PK OPC they say 255 is up tot 500horse?

  • @darrenbettney8932
    @darrenbettney8932 Місяць тому

    Hi, do you offer this as a service?

    • @garymgzs280
      @garymgzs280  Місяць тому

      I can do the work yes. I'm in swindon Wiltshire.