For real I try to do the same with my own channel. I do wish youtube would respect the users better when searching for knowlage tutorial based content and feed us the quicker and better content rather than the longwinded entertaining content.
This is how you make a tutorial. You neatly zoomed into whatever you are using so that people with restricted data plans can be able to view it in lower quality too and you explained about it clearly.
Nice bite size tutorial! Well done. I love that you pointed out the difference between the short cut keys for alt/ command for both pc and mac (this is something that always throws me!) and selection and deselction of the points. Thanks so much :-)
Omg! Finally I leaned how to use the pen tool! Your skills are beyond Graphic Design! I have been watching quite a lot of videos on pen tool but only yours made me actually learn! Forever thankful man!! Following you 🤍
Oh.my.god. as simple as that. I can't believe I wasted my time on half an hour tutorials when yours was just a click away...this is amazing, finally I can use the pen tool.
@@graphicsociety1 I'm serious, I used to do this point by point with straight lines because I could never figure out how to make several curves in a row. Every video I watched seemed to think that was too basic to explain, until I found you! Cheers
I watched about 6 other demos before this and NONE mentioned the "ALT" key to remove handle and I was beginning to think. There is no way to follow an image. Thank you
This has helped me incredibly. Thankyou so much for putting the effort into making this video, It was clear and got to the point. Exactly what I needed! Thankyou
Thank you so much for this great lesson and good information. I have a question and I hope to answer it. The first is why did you lock the bat layer and the second is why did you reduce the transparency? please.
Hello and thanks. I locked it so I would click and move it accidentally. If you don’t reduce the transparency you won’t be able to see the underlying layer to trace over.
Results won't be anywhere near as good without a very thick stroke. The thinner the lines are, the sharper the passage point between each segment will be. Unfortunately this still isn't enough to make a smooth, thin tracing line.
Im trying to trace a logo but when i press make selection it traces the whole page dk if that makes sense so when i copy and past the image i traced just dissappear instead of appearing on a new layer
Yes. You need to prepare the file for that. They may need you to change outline to a certain Color and save the file in a certain way. You also need to do some adjustments on the laser cutter software to define the material you’re using, cutting depth, etc.
Just after you closed the loop and zoomed out the point on the left wing appears to have moved since there is gray appearing outside the red line around minute 4:30 or so. A: why did it move and B: how would you fix it?
I didn’t do a clean job closing that point. To fix it clean on that point using the Direct Selection tool, the white tool, then you see the handles. Move the handles slightly
Miles Spearman select the Pen tool and then look at the Options bar or the properties panel. You probably have a fill assigned to your pen tool or you have a stroke that is very thick. You need to adjust those.
Miles Spearman First ensure your pen tool is set to shape not the path. When you finish your shape you can go to properties panel or options bar on the top to change the shapes fill and stroke colors.
Finally, a tutorial that I won't have to watch for 30 minutes.
For real I try to do the same with my own channel. I do wish youtube would respect the users better when searching for knowlage tutorial based content and feed us the quicker and better content rather than the longwinded entertaining content.
I'm glad I could help.
yeah i liked the vid, right to the point lol, no bs filler
This is how you make a tutorial. You neatly zoomed into whatever you are using so that people with restricted data plans can be able to view it in lower quality too and you explained about it clearly.
Sanket R thanks a lot for the nice comment.
Thank you so much ! Really appreciate your simple explanations after watching hundreds of complicated tutorials.
Perfect! This gave me exactly what I was looking for! I've been trying to learn this tool for ages! Thank you!
Thank you so much!! I've watched longer and shorter "how to use the pen tool" tutorial!! None where as user friendly as this one!!
Nice bite size tutorial! Well done. I love that you pointed out the difference between the short cut keys for alt/ command for both pc and mac (this is something that always throws me!) and selection and deselction of the points. Thanks so much :-)
🎉
THANK YOU SO MUCH BRO YOU ARE A LIFE SAVER!!!! STRAIGHT TO THE POINT AND LESS TALKING!
My pleasure
@@graphicsociety1 NOW HOW DO YOU FILL IT WITH COLOR???
THANK YOU!!!! NEVER HAVE I SEEN SUCH A SIMPLE PEN TOOL VIDEO WHICH IS ON POINT. THANK YOU AGAIN!
khuthejatul kubra thanks 🙏
Thank you man! Short and simple and exactly what I was needed.
best tutorial of using pen tool! simple and precise, thanks!
Omg! Finally I leaned how to use the pen tool! Your skills are beyond Graphic Design! I have been watching quite a lot of videos on pen tool but only yours made me actually learn! Forever thankful man!! Following you 🤍
Oh.my.god. as simple as that. I can't believe I wasted my time on half an hour tutorials when yours was just a click away...this is amazing, finally I can use the pen tool.
Daisy Devassy thank you for your kind words :)
Thanks bro.. Finally i know how to use pen tool !!!!!!!! your tutorial is simple and easy to understand!!! thanks....
Images
Thank you so much for this. YUP!!! your video still help till this day.
thank you for this, i have to do three backgrounds for animation and this is a life saver
thank you so much very straight forward and easy to understand 🙏🏻
You have literally changed my life forever.
Ricardo Camacho what a great complement! Thank you.
@@graphicsociety1 I'm serious, I used to do this point by point with straight lines because I could never figure out how to make several curves in a row. Every video I watched seemed to think that was too basic to explain, until I found you! Cheers
I’m glad to hear that. Enjoy graphic design buddy!
Really a perfect tutorial, thank you pal
i really like the way you explain everything here. Very clear and completely understandable to beginners. Thank you!
Thank you :)
Thank you, plain and simple to the point. 😉
got the exact solution that I was searching for thank you so much
Short, sharp and to the point !
this video was very very helpful thanks for sharing with us
This was short and well explained. I’m new to adobe photoshop and was learning how to use this tool.
Thanks :)
This helped me a lot today. Thank you so much
Alicia Dy you’re welcome 😊
I watched about 6 other demos before this and NONE mentioned the "ALT" key to remove handle and I was beginning to think. There is no way to follow an image. Thank you
Thank you so much! This is short and precise👍
🙏
This has helped me incredibly. Thankyou so much for putting the effort into making this video, It was clear and got to the point. Exactly what I needed! Thankyou
My pleasure :)
Thanks bro thanks a lot
I spent 5 hr go get rid of it
Thank you so much for this great lesson and good information.
I have a question and I hope to answer it. The first is why did you lock the bat layer and the second is why did you reduce the transparency? please.
Hello and thanks. I locked it so I would click and move it accidentally. If you don’t reduce the transparency you won’t be able to see the underlying layer to trace over.
Thank you for having posted this tutorial. It worked for me.
You're welcome :)
Thank you this helped so much
i felt you were a bit nervous while recording this tutorial but that's tottaly fine because this video is very useful and easy to follow.
🙏
Amazing thank you! Quick and to-the-point!
You're very welcome!
how did you make your edges sharp?
Much love ❤️
very nice tutorial sir, it helps us a lot. thank you very much.
My pleasure :)
Simplest tutorial on the Penn tool!
Thank you
Thanks for sharing!
Happy you did not put music
omg. me too haha im chillin trying to learn
Not my style :)
But what if we want to adjust the spline asymmetrically, as opposed to getting rid of it altogether?
VERY HELPFULL VIDEO.
I WAS ALWAYS MESSING UP WITH THIS TOOL
nice and short!
Thank you so much I found this very helpful thanks
Xeh I’m glad to hear that 🙏
simple,🥰
THANKS
Thank you so much! I was watching a turtorail on how to make a game design character using the pen tool and i was so confused
My pleasure
Excellent
Thanks mate im a student so this helps a lot!
I’m glad to hear that.
Thanks.
Thank you!!! That Alt key save me haha!
You’re welcome
Thnaks.👍🏻
This was wut I’m searching for I’m gonna share with all my fellow fends who are interested int this type of stuff...
Gladly Joseph glad to hear that.
THANK YOU!
Thanks for this man
My pleasure
This was a decent video. Much thanks to you my friend
Dandra Balfour you’re very welcome 😊
When I place the anchor points it connects them. How do I prevent that?
Thank you!! I was getting so frustrated my teacher did not explain this well at all
Results won't be anywhere near as good without a very thick stroke. The thinner the lines are, the sharper the passage point between each segment will be. Unfortunately this still isn't enough to make a smooth, thin tracing line.
You couldn't use the curvature pen tool?
Good question! It’s not as accurate. It may or may not work for this shape but overall it gives you less control.
Thank you I had to do this for class and I was really confused
Happy to hear that
simply explained very well
Im trying to trace a logo but when i press make selection it traces the whole page dk if that makes sense so when i copy and past the image i traced just dissappear instead of appearing on a new layer
I don't know why I feel that you have a Persian accent! Are you Persian? :))
Finally I am at right place
🙏
Thank you!!
Can this method be applied for laser cut?
Yes. You need to prepare the file for that. They may need you to change outline to a certain Color and save the file in a certain way. You also need to do some adjustments on the laser cutter software to define the material you’re using, cutting depth, etc.
Just after you closed the loop and zoomed out the point on the left wing appears to have moved since there is gray appearing outside the red line around minute 4:30 or so. A: why did it move and B: how would you fix it?
I didn’t do a clean job closing that point. To fix it clean on that point using the Direct Selection tool, the white tool, then you see the handles. Move the handles slightly
That was great , thank you
Paul Fiero You are very welcome. I’m glad you liked it.
thank you so much bro
You’re welcome 😊
Thanks a lot bro :)
Very useful!!! Thanks
Gabriel David you’re welcome 😊
Thank the lords for you
My pleasure.
love you man!!!!
Photoshop Lighten thank you.
Thank you - time to go to work
muchodj glad you found it useful :)
awesome bro thanks alot
Thx!
You're welcome.
you rock. ty sir
Yes, thanks! Suscribed! I can't understand how people can hit "dislike" I mean are they trolls are what?
Thanks a lot, I appreciate it :)
I have a black line surrounding my trace do you know anyway I get around that?
Miles Spearman select the Pen tool and then look at the Options bar or the properties panel. You probably have a fill assigned to your pen tool or you have a stroke that is very thick. You need to adjust those.
@@graphicsociety1 How do you change the color of the stroke?
Miles Spearman First ensure your pen tool is set to shape not the path. When you finish your shape you can go to properties panel or options bar on the top to change the shapes fill and stroke colors.
but how do you color the inside after drawing it? i need help
Select the drawn shape and go to Properties panel to change the fill and stroke.
thank you!!!! so much!
Luis Voluntaryist my pleasure!
But how to fill a colour in it? Pls answer
When you close the path of the shape then you can go to properties panel and change the Fill colour to anything you want.
Thank you
Thank you man✌
AimBot Harlz I’m glad it helped you.
thank you
TYSM
You're welcome :)
THIS VIDEO IS CURSED! IT HAS 666 LIKES!
Thank you so much for this
You're welcome!
Thanks so much! :D
Andy Vu my pleasure.
grazie
thanx you :)))
that alt trick doesnt work
Hi when I hold alt my point doesn’t delete
Sorry don’t know why. It does here
whenever i make a curve, it automatically connects and makes a semi circle chape can anyone help?
I can't concentrate, you breatk too much at the microphone
Lol galat kar rahahe bhai tu
i cant do it, everytime i click on the anchor point it deletes it, i hate the pen tool
This helped me a lot today. Thank you so much
I’m glad to hear that :)