Great Mask!! Great for sealer. great for base. Not so much for clearing especially white colors, reflections even with new clean visor. Sata Air Vision 5000 is better, since no visor is used and way less reflections, but still hard with clearing white vehicles. I have both to compare and often i have to put regular 3m mask on final clearing coat.
I love mine. Did the backpack with shorter tube and it’s pretty awesome bro. Very much worth the investment. I have almost the exact same job set up for Monday morning! NAH used door, quarter repair, bumper repair and blend front door
I have the Sata 5000 vision. It's nice. I just have one hose going to the regulator with a whip hose going to the gun. That looks like a nice system too
I use the backpack I used the waist for a while but that rubber strap stretches out a lot and starts hanging on you only complaint on backpack is it’s a pain to put on sometimes
Hey man are these suitable for our trade though? As in are they designed for us refinishers? I hear the air compressed ones are but not sure about the battery operated air systems
Hey man. I'm looking at getting a new air compressor soon. Looking at a rotary screw compressor with air dryer and vsd. What is needed filter wise for a air feed mask?
Bro ,they’re still fumes and you breathing it after you took off mask to explain at the end ,im just saying I can’t do that especially after clear coat ,that one gets me pretty bad even if I breathe a minimum bit of it ,I use an allegro fresh air ,but this one looks easier to handle and you don’t have a 100 feet hose ,I wonder if the seal on that mask fits tight on your skin
Great Mask!! Great for sealer. great for base. Not so much for clearing especially white colors, reflections even with new clean visor. Sata Air Vision 5000 is better, since no visor is used and way less reflections, but still hard with clearing white vehicles. I have both to compare and often i have to put regular 3m mask on final clearing coat.
Use the same in my shop love it bro it's a game changer mine warns you when filter is blocked great product 👍👍
I love mine. Did the backpack with shorter tube and it’s pretty awesome bro. Very much worth the investment. I have almost the exact same job set up for Monday morning! NAH used door, quarter repair, bumper repair and blend front door
I was wondering about the hose needing shortened .gonna check it out thanks 💪
@@kandyman5315 I used this 3m part number #37309
@Kandy Man how long do your filters last until you need to change it out on average?
I have the Sata 5000 vision. It's nice. I just have one hose going to the regulator with a whip hose going to the gun. That looks like a nice system too
I used that system for years great setup as well as the tr 800
Are you sure you have sata 484 filters??photo show
Yes
I use the backpack I used the waist for a while but that rubber strap stretches out a lot and starts hanging on you only complaint on backpack is it’s a pain to put on sometimes
The belt does seem not as good as old one
Nice bro. Love the video. What paint line do you use? NAH wasn’t there stage for me :/
Sherwin Williams on this one thanks for watching.
That unit is lighter and feels better. Have you considered the full face versa Flo helmet with replaceable inner and outer shroud?
Haven't seen it thanks for the information
everything is better about the new papr except battery life. The old school batman battery pack lasted much longer, but charged slower.
Great paint job just wondering do they offer tear-off lens that you just rip off when covered in paint? thanks
Yes
I have always wanted on of those.
Great protection for you 👍
Hey man are these suitable for our trade though? As in are they designed for us refinishers? I hear the air compressed ones are but not sure about the battery operated air systems
Yes it is tr800 is make sure its for painting they make ones for medical and other trades
Thanks for the review! About how many hours do you think you get out of a filter?
The filter last a very long time and let's you know when it needs to be replaced
Hey man. I'm looking at getting a new air compressor soon. Looking at a rotary screw compressor with air dryer and vsd. What is needed filter wise for a air feed mask?
Sata makes a setup not sure of other companies air has to be breathable free of any oil or water I would go with sata to be safe
@@kandyman5315 thanks man.
How much does the helmet/mask and hose weigh? Wondering how much weight your head needs to support
It's not bad at all not sure exactly how much it's weight is
Quei pode midua uma dessa máscara
I know it's expensive £1000 about $1.300 but absolutely worth it
How do feel about the iwata supernova 1.3 hvlp entech gun for base and pearls
Haven't tried it heard its a good gun
I have the TR600 , love it , will never go back to anything else
Great system 👏 👌
Kandy Man, Are you still liking this mask now that you have had it a while? Any idea if you can wear eyeglasses with this mask?
Yes it is great and I'm sure you can wear glasses plenty of room
How about keeping overspray off face shield or clear part
It has a peel off lens cover that you change when needed.
@@kandyman5315 thanks- is it clear so it will protect from overspray while painting?
Absolutely correct 👍 thanks for watching
Bro ,they’re still fumes and you breathing it after you took off mask to explain at the end ,im just saying I can’t do that especially after clear coat ,that one gets me pretty bad even if I breathe a minimum bit of it ,I use an allegro fresh air ,but this one looks easier to handle and you don’t have a 100 feet hose ,I wonder if the seal on that mask fits tight on your skin
👍
How is the allegro
how often the filters are changed
About every 2 months
Will it protect against nitrocellulose ?
I know that's in some paints check with 3m
Do you prefer the 3M TR 800 versus the Sata 5000 vision?
Yes it can go anywhere in the shop without a hose connected. And it works great
@@kandyman5315 and it protects from isocyanates??
@@dkv674 absolutely
@@kandyman5315 excellent, I see it online for about $2900. Trying to find the best deal. hopefully I can purchase one today. Thank you!
Is it glasses friendly?
👍
Whatvkind of shirt are you wearing. I hate the full suit it makes you sweat alot.
Lab coat
Can you smell the paint?
Not at all
Is there enough room for glasses?
Yes
@@kandyman5315 Thanks for the quick reply
Cracking piece of kit 😅😅
🤣
What’s up bro how much did you pay for it ?
It go's for around 2500
Damn they are more now than when they first came out.. fckn covid19 did that.. I paid 1800$ for mine
Anyone know of an air fed mask that's comparable to this one, and won't force me to sell a kidney to be able to afford?
They are not cheap .but health is important
Can you still smell the paint while wearing it?
Not at all
If you smell paint it's not safe
@@kandyman5315 which model cartridge do you use? I have a TR-671N and it is just for particulets like silica
Tr 6510n
@@kandyman5315 thank you so kindly!
Stay healthy 💯💯💯💪💪💪💪👍👍👍👍👊👊👊😄😄😄😄
💯💯😁😁
😊🤔🤗👍✌️
sata air vision 5000 es mejor