My Wife asked me why it was taking me so long to watch this vid. I told her I was watching the grass grow. Looks like it could have been mowed a week ago. Good vid. Thanks
Delivered a nice even cut, has the super tight turning ability ua-cam.com/users/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend I was looking for, and is just a blast to drive. It takes a little bit to get used to driving one after driving a normal tractor style, but once you've got it, you've got it. If you're cutting lines, you have to be careful spinning the mower around or the back tire will dig a bare spot. Just take it nice and slow during the turn and then it's back to full throttle across the yard!
Great video, I do have a question if you don't mind me asking? How come you cut it so low, was it because of the customer request, or or wanted to see what the mower could do? Cause that would have made some awesome strips especially looking from the lake. Thanks
Thank you!! To answer your question…this was mowed at 3.75” it just looked like it was cut extremely low because it was over a foot tall. This was a clean up mow so we could get it to a manageable height and to match the lot on the side of it we mow. It is kept at 4” now and the stripes do look NICE 😍
Hello. Im really glad i found your channel. I live in the Mountains of North Carolina and im looking to buy a zero turn mower for my property and your Ferris mower done amazingly well on that slope. What series and engine choice of mower do you have ?
Hello! Thank You! This is our Ferris IS3200 I believe the IS3300 took its place but I’m not sure. If you want information on this mower please check out our other channel. J’s Crazy Cutz. We have a long term review and many maintenance videos on it.
My backyard is about like that hill. It routinely gets 5 feet tall(out of town worker) and all I got is a push mower. It sucks ass. The local lawn companies want $100 a week to mow it so it doesn’t get mowed till I come home once every 2 months lol.
pretty lake property where is this at?? what engine is that I have the fx801 it's a beast you should try scag high lift blade it will help push clippings out better
Thank you for the comment! We did take a LOT off but it was extremely tall and it had to be brought down for maintenance. This was cut at 3.75” it is now kept at 4”.
how did that customer like there lawn lower like that . tuff job for a mower but i would of cut it on about 4inch plus i mulch in my area they love it . keep cutting .
The mower in this video I think 🤔 had around 1K hours on it when we did this. We still have the mower, we purchased it in 2017. It now has over 2,200 hours and we still mow with it! Has been an all around FANTASTIC mower for us! Thanks for watching and commenting!
@@XtendedCutz wonderful, trying to decide on a mower for cutting my 30 acres of horse pastures. They are relatively flat and without thick weeds so I believe a zero turn could tackle it, especially after seeing this. It would certainly be faster than an 8ft rotary cutter behind my tractor. in-between the IS6200Z, 3200Z or a SCAG turf tiger II. Any suggestions?
Both are great mowers. I would look at dealer support as one of the deciding factors. We do LOVE our Ferris suspension! And the Briggs Vanguard has been an AMAZING engine for us. That is what is on our mowers.
@@XtendedCutz Hello, I was looking to purchase a used IS3200Z with 1100 hours. How would you rate the overall performance and does it run into issues often outside of ordinary maintenance? I would just be using it for a farm property with 3-4 acres worth of grass. Also, is yours the 60" deck or 72"? I was looking at the 72" and I'm a little worried it might be too big.
@aggressivelyamicable5987 we have a 61” deck. We have another UA-cam channel that we do lawn care videos with maintenance and reviews. We have a 1,000hr review on this unit in one of our playlists. We have done multiple videos on this unit that might give you a good idea. The channel is @JsCrazyCutzLLC. At this moment the unit has over 2,200hrs and is getting the engine replaced, but only because the inner air filter failed and damaged it not for wear and tear. Hope this helps!
We weren’t focused on stripes or nice lines this first cut. It was mostly getting it knocked down, dispersing the clippings, and doing so with care so as not to lose control. Thanks for watching!
Ideally that would have been a good height. But the customer wanted the property to be cut closer to 3” for maintenance. As it was mostly Bahia grass at this time we knew it wouldn’t damage the grass to mow that low. Thanks for the comment and watching!
The grass was so tall it would have looked like it was scalped at almost any height. This was a first clean up cut for a Bahia lawn. If I remember correctly it was cut around 3 1/2”. Thanks for watching
My Wife asked me why it was taking me so long to watch this vid. I told her I was watching the grass grow. Looks like it could have been mowed a week ago. Good vid. Thanks
Thanks! Glad you enjoyed it!
Delivered a nice even cut, has the super tight turning ability ua-cam.com/users/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend I was looking for, and is just a blast to drive. It takes a little bit to get used to driving one after driving a normal tractor style, but once you've got it, you've got it. If you're cutting lines, you have to be careful spinning the mower around or the back tire will dig a bare spot. Just take it nice and slow during the turn and then it's back to full throttle across the yard!
Thank you!
This channel is so underrated, I love your content!
Thank you so much! We appreciate you watching!
Beautiful place brother 😎😎very green grass up there
Thank you! It is quite beautiful!
Glad I found this channel. Learned to ski on that river.
It is a beautiful place! Thanks for watching! We hope you continue to enjoy our content.
This is on the river too…
ua-cam.com/video/_gpJjzRk-Aw/v-deo.html
beautiful place and very green grass
It is beautiful! Thanks for watching
Great video
Thanks Logan!
Excellent job,but that water made me so nervous.gud on you mate I loved every bit of this.🤗🤗🤗🤗🤗🤗
Thank you!! Thanks for watching!!
That Ferris is a BEAST
It really is 😁 thanks!
Tall grass and indeed an insane hill. But you and machine did a great job.
Thank You!!
I love your video 😊
Thank you! We appreciate you watching!
@@XtendedCutz Welcome 😊
From Malaysia watching
Thanks for watching!!
Mantap bro 👍💪.
Thanks for watching
Great video, I do have a question if you don't mind me asking? How come you cut it so low, was it because of the customer request, or or wanted to see what the mower could do? Cause that would have made some awesome strips especially looking from the lake. Thanks
Thank you!! To answer your question…this was mowed at 3.75” it just looked like it was cut extremely low because it was over a foot tall. This was a clean up mow so we could get it to a manageable height and to match the lot on the side of it we mow. It is kept at 4” now and the stripes do look NICE 😍
I just found yall channel and I Subscribe
Thank you!!
Good
Thanks for watching!!!
I have a lawn with the levee in the back!
Can get a little steep
Hello.
Im really glad i found your channel.
I live in the Mountains of North Carolina and im looking to buy a zero turn mower for my property and your Ferris mower done amazingly well on that slope.
What series and engine choice of mower do you have ?
Hello! Thank You!
This is our Ferris IS3200 I believe the IS3300 took its place but I’m not sure. If you want information on this mower please check out our other channel. J’s Crazy Cutz. We have a long term review and many maintenance videos on it.
My backyard is about like that hill. It routinely gets 5 feet tall(out of town worker) and all I got is a push mower. It sucks ass. The local lawn companies want $100 a week to mow it so it doesn’t get mowed till I come home once every 2 months lol.
Wow that must be a project to mow! Thanks for watching!
pretty lake property where is this at?? what engine is that I have the fx801 it's a beast you should try scag high lift blade it will help push clippings out better
This is on False River. The engine on this mower is the 37HP Vanguard
That grass was no match for the Ferris 👉💪👈
It is a BEAST!
Looks like grass is too short but it will grow out. Interesting property.
Thank you for the comment! We did take a LOT off but it was extremely tall and it had to be brought down for maintenance. This was cut at 3.75” it is now kept at 4”.
Good job for a Ventrac.
It would be! Thanks for watching
I don’t think I would have started at 3.75 with mine but it didn’t show that Ferris anything 👍👍👍
Still got the power with over 1,500hrs 🙌🏻
That Ferris is big
It really is a monster mower 😁
how did that customer like there lawn lower like that . tuff job for a mower but i would of cut it on about 4inch plus i mulch in my area they love it . keep cutting .
This was the first cut for us on this property. We were cleaning it up before we took over the regular maintenance. It now stays cut at 4”
Wow! That was hard on the hydros and the cutting system.
How many hours on that Ferris at the time?
Is it still running now?
The mower in this video I think 🤔 had around 1K hours on it when we did this. We still have the mower, we purchased it in 2017. It now has over 2,200 hours and we still mow with it! Has been an all around FANTASTIC mower for us! Thanks for watching and commenting!
@@XtendedCutzAwesome. I'm picking up my ISX 800 this week! 👍
Hope you enjoy it! This is the ISX3200 they have since updated it to the ISX3300.
Understood
We also have another channel we’re we do reviews and maintenance of you are ever in need of that information it is @JsCrazyCutzLLC
Thick grass cutting on a .steep Hillside.that one way to find out.if you got the right type of.mower
That it is 😁 Thanks for watching
@@XtendedCutz cool 😎
Where's the FW15 the natural complement to any Ferris mower?
We don’t have a large need for walk behind mowers here. Put that would have worked great!
I remember when you guys did that the hill is insane they say always go across but up and down feels safer to me
Yes in deed! Thanks for watching!
I did a hill like this. Now I need a new transmission 😢
🥺 that’s sad, sorry that happened to you.
Wooo you cut that grass low lol
It looks very low but we keep it at 4 inches now! Thanks for watching!
Was that the first cut?
Yes it was the first one after taking on the lawn.
Which model? Thanks.
Thanks for watching! This is our Ferris IS3200Z mower!
@@XtendedCutz wonderful, trying to decide on a mower for cutting my 30 acres of horse pastures. They are relatively flat and without thick weeds so I believe a zero turn could tackle it, especially after seeing this. It would certainly be faster than an 8ft rotary cutter behind my tractor. in-between the IS6200Z, 3200Z or a SCAG turf tiger II. Any suggestions?
Both are great mowers. I would look at dealer support as one of the deciding factors. We do LOVE our Ferris suspension! And the Briggs Vanguard has been an AMAZING engine for us. That is what is on our mowers.
@@XtendedCutz Hello, I was looking to purchase a used IS3200Z with 1100 hours. How would you rate the overall performance and does it run into issues often outside of ordinary maintenance? I would just be using it for a farm property with 3-4 acres worth of grass. Also, is yours the 60" deck or 72"? I was looking at the 72" and I'm a little worried it might be too big.
@aggressivelyamicable5987 we have a 61” deck. We have another UA-cam channel that we do lawn care videos with maintenance and reviews. We have a 1,000hr review on this unit in one of our playlists. We have done multiple videos on this unit that might give you a good idea. The channel is @JsCrazyCutzLLC. At this moment the unit has over 2,200hrs and is getting the engine replaced, but only because the inner air filter failed and damaged it not for wear and tear. Hope this helps!
I’ve never seen a zero turn hold a hill like that that’s amazing
It’s a great machine! Thanks for watching!
Nice to cut that property near the sea
Thanks! It was once an offshoot of the Mississippi River . But over time it got disconnected and is now a lake!
Little confused on some of the mowing patterns in the second half
We weren’t focused on stripes or nice lines this first cut. It was mostly getting it knocked down, dispersing the clippings, and doing so with care so as not to lose control. Thanks for watching!
@@XtendedCutz makes sense, looks like it was fun to cut
Lmao...what hill?
Come to my house and gawk as the locals do when I mow with my Spartan 32hp Vanguard oil guard FULL Suspension and Suspension seat.
For us this is a hill, we live in a flat slightly marshy area
Wat vaker maaien
Thanks for Watching
You're cutting that grass way too low buddy! Should be mowing it around 5.5"
Ideally that would have been a good height. But the customer wanted the property to be cut closer to 3” for maintenance. As it was mostly Bahia grass at this time we knew it wouldn’t damage the grass to mow that low. Thanks for the comment and watching!
i wouldnt cut that low
No sir 😁 it stays at 4” now!
SCALPER !!!!
The grass was so tall it would have looked like it was scalped at almost any height. This was a first clean up cut for a Bahia lawn. If I remember correctly it was cut around 3 1/2”. Thanks for watching