The only part that was useless was taking the pins out of the connector and splicing them when you could just cut the 2 and spliced them while still in the connector other than than pretty informational
Can you share how the relay is connected? I understand that post 86 pulls power and the other post are grounds. How are the other 3 post wired? Also, rather than running wires to connect both enclosures to 1 relay, can you use two relays, one for each side?
I think I figured it out.. Post 86 connected to the dual harness that is connected to the DRL enclosure. Post 87 connected to the white wire from the RGBW kit. The last two post are grounds.
Yo what about wiring the boards like how diode dynamics instructions tells you to do it ? Will i install have the same issue when using my turn signals?
If you do it literally as they say to do it, then they will turn off with your signal lights on, on that side, just like the DRLs do stock. I preferred to have them stay on all the time (funnily enough though, they do still turn if if the hazards are on, because that means both signals are active)
Good description- best I’ve seen so far!
Just letting you know the UA-cam decal on your car worked saw you earlier tn😂 the build is clean and sounds awesome
That's awesome, thank you! I've only had them on for a few days, they worked fast
👍👍
Thanks for the in-depth video. I’m gearing up to do it my self as well 🦾
The only part that was useless was taking the pins out of the connector and splicing them when you could just cut the 2 and spliced them while still in the connector other than than pretty informational
Can you please show me how you hide and connect all the wiring for the diode lights
TR Madness did you ever figure out how to do what you asked in this group conversation? Just curious, because I need some help with all that.
Can you share how the relay is connected? I understand that post 86 pulls power and the other post are grounds. How are the other 3 post wired? Also, rather than running wires to connect both enclosures to 1 relay, can you use two relays, one for each side?
I think I figured it out.. Post 86 connected to the dual harness that is connected to the DRL enclosure. Post 87 connected to the white wire from the RGBW kit. The last two post are grounds.
Just passed the Charger and seen the decal! Do you install these lights on other people’s cars or you just show how to do it?
Haven't actually done anything on other people's cars, just our own so far
Very Good Garage ok cool I was just wondering. Thank you.
Are these bright in direct sunlight
Yes, they are brighter than the stock DRLs
@@VeryGoodGarage thanks
Yo what about wiring the boards like how diode dynamics instructions tells you to do it ? Will i install have the same issue when using my turn signals?
If you do it literally as they say to do it, then they will turn off with your signal lights on, on that side, just like the DRLs do stock. I preferred to have them stay on all the time (funnily enough though, they do still turn if if the hazards are on, because that means both signals are active)
Very Good Garage thanks man