I do window tinting in Texas and I’ve been asked about this many times. this is probably one of the best instructional videos I have come across thank you
Out of all the videos I have searched this was the most helpful one that made me feel confident in doing my own install. Thanks guys! Much love and respect from Cali!
This vid covers all bases and whilst I've seen a couple of these how-to's on youtube, this is just so well done. Thanks man. Quite well laid out and made it easy to watch!
In my opinion tinted tail lights are easier to see because the red tail lights you can’t really tell when the light is on it’s just a brighter red. I love the look! Had my civic taillights tinted for 3 years never had a problem
I can tell he’s used to telling customers the same thing over to assure the customer everything is cool. I do car audio and I find myself repeating the same stuff for them to wind up asking the same question. Either way, good vid man I’m inspired to do my own now
At first, I didn't think I could do this myself on my 08 HHR SS rear lenses, but after watching your very instructional video, I think I can. I'll have to wait till spring though. Thanks for the video!
You did an excellent job tinting the rear taillights. Two thumbs up👍👍. If you can tint the rear taillights on my 1995 Mercedes SL , I'll ship you the taillights , since I live out of state .
I’ve used VHT night shades several times on my cars, if the light looks that nice after you stripped it, the niteshades wasn’t done properly is why it looks so bad, also you’re supposed to clear over niteshades after spraying it, all my lights looked as good or better than tinting the tail light. But I wouldn’t recommend using the niteshades if you aren’t a good painter of auto parts. I checked out this video because I was to try tinting my new cars lights instead of painting so it’s not permanent Great video 👍🏼
Don’t worry about the internet trolls bringing ya down nice job on the lights an good job getting out there an actually showing step by step very thorough. 2 thumbs up.
I clear coat them with PPG after I nightshade but I have a body shop so that's hard for anyone to do at home but I get a mirror finish after I'm done and I always tape off the reverse lights I like being able to see when I back up at night. But I still like y'alls product it's perfect for the average do it yourselfer.
Exactly it’s all about the effort nightshade can be used effectively and look nice if done right. Most people just spray them and don’t even bother to see if it’s even and just leave it but if you actually but effort into them. Like spraying them then doing a light wet sand then spray a few coats if clear and also do some wet sanding and then polish them. They will come out with a high gloss mirror finish with simple products. But nobody does all that effort so they look all dull and like shit.
david peirce were talking the average consumer who buys nightshade who it’s marketed too. Not everyone has access to professional materials or A booth. Of course the proper way is to have a body shop do it but these steps is for your average garage worker.
Is there anyway you can show the difference in percentages of tint vs how "blacked out" you're trying to go? This was a very helpful video my man. Many thanks!
I live in Arizona, I spray painted my tail lights with some cheap spray from Walmart & got pulled over 3 days later. I removed the spray paint & had it done professionally & havent been pulled over since. Tail light film is actually legal in Arizona, but your lights need to be seen clearly.
I used a spray tint and a semi gloss clear coat and in my opinion it was way better, my taillights have odd indent designs (2003 Ford Escape) and even a weird dip in the plastic. I have them super dark and they still shine through very well. I would recommend if you are worried and have an older car to get brighter bulbs though but stock should be fine
Great video.... Ummm your razor your using to make the cut around the edge of the light... Could you add a squgie/felt type end that the razor blade comes put of as to not scratch and keep the cuts smooth and flowing... As if when you open the trunk it would look a little better... umm kinda like when you spray a car and the jams aren't sprayed... I'll keep your site in mind for my next whip.. Keep up the good work
luke tisdelle it's not good for the taillight though, it's shiny cause of the grease and grease is really bad for taillights, headlights etc.. it eats it out (my opinion shouldn't matter lol)
I clear coat them with PPG after nightshade but I have a body shop so that's hard for anyone to do at home but I get a perfect mirror after I'm done and I alway tape off the reverse lights. I like seeing when I back up at night but still really like y'alls product it's great for the average Do it yourselfer
Joe Patcity I’m I the only one who thought... that’s all of f**king work, when u can clear coat the spray tint and use compound after. Totally agree with you guys👌
Great diy video . Looks awesome. I'd like to ask what %of tint did you use for the taillights?? Yes I agree looks much better than the spray method for tinting the taillights.
I tried vivids dry application and this film seems a lot more forgiving. The vivid wrinkles a lot and you can’t get enough heat to make it lay nice without burning it. Definitely gonna try this film next
@@maddawgnoll nope, they are actually holes on the taillight. Manufacturers that use a specific plastic added small holes to allow water evaporation from build up, thermal expansion from light heat, and drainage. Usually cheaper made ones or models that were known to have a seal issue due to cheap products had this done to combat the issue without having to do a recall or change the way they built the parts allowing them to keep a lower cost
@@maddawgnoll Maybe do a little research? Try googling and educate yourself a bit. Having worked at a manufacturing plant nearly 20+years. I can assure you especially in older vehicles and many cheaper made production models, a small hole was indeed placed in the two plastic layers for those reasons. It allowed for thermal expansion, as the car ages with cheaper plastics used in tail lights they would break down due to built up trapped heat. This air way allowed air to escape so that when it expanded it would reduce cracking. Next time you goto a car wash pay attention. You'll even see this on alot of new cars still. When it's a beautiful and hot day , a person takes their car thru a touchless car wash, gets home and notices theirs quite a bit of condensation in the rear lights. This small pin hole allows the heat of the light and the sunlight to evaporate the water and allow it to escape. With out this pin hole it would be like a water bottle in sunlight, it continuously condensate on the inside lens without drying possibly shorting out the light. You're welcome for this little bit of factual knowledge. ;)
first of all this tint job looks awesome. love the result. i was gonna spray mine but im convinced not to now. i have a 01 sunfire (its mine and i like it) and would do this myself. would you recomend using a little water/soap or a bunch on the sticky side at first?
Nice job ! I tell you I tried tint on my suburban and that shit isn’t as easy as you made it look ! Got frustrated and just used night shade and came out perfect
The nipples can be sanded down and tail light buffed with metal Polish ... Then tint them properly and have no trace left behind ...... Liked and Subscribed ... Great channel
Hey, just a question regarding the legality of these. I've been hearing that it's "illegal", but I've also heard it's "legal"... Something about the reflectors in the lights aren't visible. I live in Iowa so it is probably different for california.
Iowa here. I see a lot of cars down here in the southeast that have this tent. Some are even factory. You just can't have them dark like what he cleaned off. Been pulled over and received a ticket for it being too dark. State trooper said I would have been good if you can see the brake light.
Here in MN anything that's on your tail light that didn't come from the factory is illegal. as far as the reflectors in the tail lights... not every car has them some cars like mine have the reflectors built into the bumper separate from the light. Iowa should also have their state statutes online too.
IMO the best way to tint a tail light is to add a little color to the clear and triple coat it. I had a silver Chrysler 300 that I tinted the tail lights silver, rebadged, looked clean af.
@@splooshkaboom4210 Actually it is. Even the light smoke tint on tail lights in bright sun light reduce the actual visibility of the lights by over 75%. In a shop or dim light setting the difference does seem like a lot, but once you get into bright day light it very much indeed does affect the visiblity. Hence why smoked or tinted headlights and tail lights are illegal on roadways.
@@splooshkaboom4210 I have worked so many wrecks from people not seeing the tail lights it's ridiculous. (The person with the tinted lights is pretty always found at fault as well for altering the visibility of the light)
For those "bubbles", wouldn't filling them in with clear nail polish work to prevent the dimpling effect? Kind of like transparent bondo. Let it dry and smooth it with the clay-bar again.
The nail polish solvent would "fog" the plastic on the tail light. You definitely want the film bonded with the light itself not with any filler between.
This is such a safety violation that you can't get away with in many states. Here in Florida, although statute 316.234 states, "An object, material, or covering that alters the stop lamp’s visibility from 300 feet to the rear in normal sunlight may not be placed, displayed, installed, affixed, or applied over a stop lamp," law enforcement officials overlook it. So, in addition to speed traps to meet monthly quotas, they could meet them much quicker by impounding such vehicles; ditto for the headlights and windows. Folks go for the cool appearance factor and not safety.
I do window tinting in Texas and I’ve been asked about this many times. this is probably one of the best instructional videos I have come across thank you
Could I use tint from wish to tint mine? They said it was window tont so in wondering if I could still use it
Did he use the smoke tint or the dark tint?
I just got asked and here I am lol
I used they’re tint and used this video to help me tint my tail lights and headlights and that shit worked amazing
Out of all the videos I have searched this was the most helpful one that made me feel confident in doing my own install. Thanks guys! Much love and respect from Cali!
how did it go?
@@huntergray4116 not so good
"I'm actually on the website too if you'd like to purchase me"
Kennan Tate omfg ahahah
This vid covers all bases and whilst I've seen a couple of these how-to's on youtube, this is just so well done. Thanks man. Quite well laid out and made it easy to watch!
Just wanna say very well done video. So many instructional videos on UA-cam are clunky and aggravating but you guys nailed it.
In my opinion tinted tail lights are easier to see because the red tail lights you can’t really tell when the light is on it’s just a brighter red. I love the look! Had my civic taillights tinted for 3 years never had a problem
this car is also available on the website
Stanley So lmao
He’s also available on the website
why would they use or advertise other equipment when they have there own to sell and rep to show it gets the job done lmao
jack bush
exactly
Stanley So lol
Surprised he didn't try to sell us his water gun😂
raul menedez Premium Brand spray bottles are available on the site as well
And his fing too hahhahah
Available on the website lol
The website is also available on the website
raul menedez yuh Drf uded um hi hi h nu gh
The claybar and soapy water reminds me of chris fix
Ishaaq Ansar soapy wooder*
Wonder
Out with old in with new one 😂😂😂
i read soapy water in his voice
LOL so true
This Jetta is actually also available on our website
And for that reason I'm out!
I can tell he’s used to telling customers the same thing over to assure the customer everything is cool. I do car audio and I find myself repeating the same stuff for them to wind up asking the same question. Either way, good vid man I’m inspired to do my own now
You guys make this look extremely easy, wrapping anything is very difficult. Leave it to the pros, worth it in the end.
11:37 you can purchase that air bubble on their website
That's the hole in the taillight, he even explains that during the video
@@Roulette55 the hole wasnt on the bottom right
At first, I didn't think I could do this myself on my 08 HHR SS rear lenses, but after watching your very instructional video, I think I can. I'll have to wait till spring though. Thanks for the video!
Bro this guy got roasted so bad in the comments. 🤣 🤣 🤣 🤣
3m views makes up for the jabs
He got 27 k likes … you got 43 🤦♂️
Even after 7 years this vid is well explainded and very helpfull!! 👌👍
Forget the lights, I need homeboy’s barber
TheLegend27
Its available on the website..
Stephan D that is a fresh cut.
For his head or is arms?
AGREE
This film looks 100x better quality than the autozone film, cellophane. Absolutely going to be checking your site out, thanks guys
4:32 Second hand is also available on our website
Best comment 😂😂
I was looking for a tint tail light video and I didn't expect it to be the same e car as mine 🤣🤣🤣 thank you so much
Is your company for sale on the website ?
Yes. Everything must go!
Hell yeah man this video is very helpful. Just what I needed to get this job done
You did an excellent job tinting the rear taillights. Two thumbs up👍👍.
If you can tint the rear taillights on my 1995 Mercedes SL , I'll ship you the taillights , since I live out of state .
Thaddeaus Caldwell 😂😂😂
I fucking love skilled craftsmanship like this. Good job fellas.
I’ve used VHT night shades several times on my cars, if the light looks that nice after you stripped it, the niteshades wasn’t done properly is why it looks so bad, also you’re supposed to clear over niteshades after spraying it, all my lights looked as good or better than tinting the tail light. But I wouldn’t recommend using the niteshades if you aren’t a good painter of auto parts.
I checked out this video because I was to try tinting my new cars lights instead of painting so it’s not permanent
Great video 👍🏼
Don’t worry about the internet trolls bringing ya down nice job on the lights an good job getting out there an actually showing step by step very thorough. 2 thumbs up.
2:20 "Soapy Wooder"
Dexfire chrissssssss
Chris fix here
Dexfire HEEEYYYY GUYSSSS lol
Funny
Chris Fix Be Like!
is the car, also, available on the website?
I clear coat them with PPG after I nightshade but I have a body shop so that's hard for anyone to do at home but I get a mirror finish after I'm done and I always tape off the reverse lights I like being able to see when I back up at night. But I still like y'alls product it's perfect for the average do it yourselfer.
Joe Patcity ive done it 100s of times like that and all thrm lights i did still look like glass and will outlast ant film by 10 years easy
Exactly it’s all about the effort nightshade can be used effectively and look nice if done right. Most people just spray them and don’t even bother to see if it’s even and just leave it but if you actually but effort into them. Like spraying them then doing a light wet sand then spray a few coats if clear and also do some wet sanding and then polish them. They will come out with a high gloss mirror finish with simple products. But nobody does all that effort so they look all dull and like shit.
Drew tutwenty thats why you clearcoat over it and not rattlecan clear either,correct way is to use a transparent black basecoat and then to clear them
david peirce were talking the average consumer who buys nightshade who it’s marketed too. Not everyone has access to professional materials or A booth. Of course the proper way is to have a body shop do it but these steps is for your average garage worker.
looks good tried it on my audi damn it was hard , ripped it of at the end and left it stock
video was better than what I was expecting.
Is there anyway you can show the difference in percentages of tint vs how "blacked out" you're trying to go? This was a very helpful video my man. Many thanks!
What % tint film was that?
15%
Loud and clear brow….thank for your tutorial
I live in Arizona, I spray painted my tail lights with some cheap spray from Walmart & got pulled over 3 days later. I removed the spray paint & had it done professionally & havent been pulled over since. Tail light film is actually legal in Arizona, but your lights need to be seen clearly.
I live in Arizona and our cops do not fuck around they do there job some times a little bit to much lol
@@kanoandlupo3707 I couldn't agree more. Lol
@@kirstinb3592 take care merry Christmas:)
@@kanoandlupo3707 Thank you! You as well! 🎄
I agree. I live in az and never had any issues from my previous cars with tint
I used a spray tint and a semi gloss clear coat and in my opinion it was way better, my taillights have odd indent designs (2003 Ford Escape) and even a weird dip in the plastic. I have them super dark and they still shine through very well. I would recommend if you are worried and have an older car to get brighter bulbs though but stock should be fine
You make it look so damn easy!! 🤙🏽🤙🏽
Nice.Liked the content and amount of information !!
What percent tint did you use?
I SUBSCRIBED CAZ UR VIDEO WAS SIMPLE AND INFORMATIVE......THANKS....
And it actually actualizes the actualization. Actually.
Thanks on your tutorial video i will try to do my DIY tinting of my headlights and tailghts....
@1:35 That light actually looked pretty sick.
by far the best vid out good job
I thought it looked better with the factory finish, but you done a tidy job, good video, thumbs up from me.
Great video.... Ummm your razor your using to make the cut around the edge of the light... Could you add a squgie/felt type end that the razor blade comes put of as to not scratch and keep the cuts smooth and flowing... As if when you open the trunk it would look a little better... umm kinda like when you spray a car and the jams aren't sprayed... I'll keep your site in mind for my next whip.. Keep up the good work
if you buff vht nightshade after it dries it gets shiny and looks way better almost like film tint
luke tisdelle it's not good for the taillight though, it's shiny cause of the grease and grease is really bad for taillights, headlights etc.. it eats it out (my opinion shouldn't matter lol)
RTS that isn't true. You can take some carb cleaner and clean your taillights off a year later if you want and it will look brand new
I clear coat them with PPG after nightshade but I have a body shop so that's hard for anyone to do at home but I get a perfect mirror after I'm done and I alway tape off the reverse lights. I like seeing when I back up at night but still really like y'alls product it's great for the average Do it yourselfer
Yea I used Maguires Ultimate Compound on mine and they came up great. Still dark and shiny a couple years later.
Joe Patcity I’m I the only one who thought... that’s all of f**king work, when u can clear coat the spray tint and use compound after. Totally agree with you guys👌
great vid. you explain everything really well. thanks what percent tint did you use ?
Great diy video . Looks awesome.
I'd like to ask what %of tint did you use for the taillights??
Yes I agree looks much better than the spray method for tinting the taillights.
ever found out what the % was
I tried vivids dry application and this film seems a lot more forgiving. The vivid wrinkles a lot and you can’t get enough heat to make it lay nice without burning it. Definitely gonna try this film next
You should have done it with the trunk open, to go across the tail lights entirely....
Good work, fact I didn't see a can of beer next to you.
Sincere job.
is it just me or was this uploaded a few days ago
Hey guys Chris fix here
Brilliant video really interesting .. 👍🇬🇧
What percent tint was ‘this for the taillights
There’s no percent they are done by shade where I went had a tailight with shade samples
Looks like 10%
@@ZL1Dnero 10!!! 5 is lambo..fuck lol.
I really dig how you mixed in the music track to the video. Keep it up mang!
3:07, isnt those holes there so the lights dont fog up?
@@maddawgnoll nope, they are actually holes on the taillight. Manufacturers that use a specific plastic added small holes to allow water evaporation from build up, thermal expansion from light heat, and drainage. Usually cheaper made ones or models that were known to have a seal issue due to cheap products had this done to combat the issue without having to do a recall or change the way they built the parts allowing them to keep a lower cost
@@maddawgnoll Maybe do a little research? Try googling and educate yourself a bit. Having worked at a manufacturing plant nearly 20+years. I can assure you especially in older vehicles and many cheaper made production models, a small hole was indeed placed in the two plastic layers for those reasons. It allowed for thermal expansion, as the car ages with cheaper plastics used in tail lights they would break down due to built up trapped heat. This air way allowed air to escape so that when it expanded it would reduce cracking. Next time you goto a car wash pay attention. You'll even see this on alot of new cars still. When it's a beautiful and hot day , a person takes their car thru a touchless car wash, gets home and notices theirs quite a bit of condensation in the rear lights. This small pin hole allows the heat of the light and the sunlight to evaporate the water and allow it to escape. With out this pin hole it would be like a water bottle in sunlight, it continuously condensate on the inside lens without drying possibly shorting out the light. You're welcome for this little bit of factual knowledge. ;)
Kevin Noll my Jetta has holes in the tail lights, stock lights and lenses.
@@maddawgnoll All of our vehicles got holes in the taillights atleast and their purpose is for the light not to fog up.
Its a great video thanks. I watched another videos too and the question is that can I or need to take it off the foil after I finished it?
first of all this tint job looks awesome. love the result. i was gonna spray mine but im convinced not to now. i have a 01 sunfire (its mine and i like it) and would do this myself. would you recomend using a little water/soap or a bunch on the sticky side at first?
Wow flawless install. Great instructional video!
just brake cleaner to remove the vht?
Great vídeo. Well done👌
illegal in most states. any changes to factory tail lights are just waiting to get a ticket
Dumbest (well almost) thing I ever saw. 8/14/18 :(
Prefer stock lights anyway. Easy to see, as intended.
Incorrect. There are visibility laws, so if your lights are visible from the legal distance and they are not some funky color, you're fine.
How would they know. Chevy has dark tinted tail lights from factory
My dad wants this done to his Ford Explorer and the sport models come with pre smoked taillights so I doubt its illegal
Nice job ! I tell you I tried tint on my suburban and that shit isn’t as easy as you made it look ! Got frustrated and just used night shade and came out perfect
The nipples can be sanded down and tail light buffed with metal Polish ... Then tint them properly and have no trace left behind ...... Liked and Subscribed ... Great channel
Or buffing compound....then polished
Great video I will be tinning my light soon as my supplies come off eBay thanks a lot.
I thought it looked sick when he wiped half the spray tint 😂
Solid work bud. How long does the tint last?
This is also a good way to have your insurance deny a claim if you get rear ended
wow never thought of this.
Matt Thompson great point! Never thought of that
got rear ended last month, no claim, 100 free repair. hat them ultra dark even shattered lights :D
What about the bigass car itself
Progressive will just take $50 off your deductible. Just went through this with my insurance.
Wow what a difference looks good, I think I'll do this on my Tacoma. Thanks
Thanks for putting this up P.G I've never seen it done before, it was interesting
What percent or shade of tint is that? Looks awesome
all im gunna say is when the spray tint was just on the edges it looked kinda sick here this 1:36 id put that on my car
That’s how the 2020 Nissan Altima’s are
the stock lights look SO much better, but the job you did was great
Hey, just a question regarding the legality of these. I've been hearing that it's "illegal", but I've also heard it's "legal"... Something about the reflectors in the lights aren't visible. I live in Iowa so it is probably different for california.
Iowa here. I see a lot of cars down here in the southeast that have this tent. Some are even factory. You just can't have them dark like what he cleaned off. Been pulled over and received a ticket for it being too dark. State trooper said I would have been good if you can see the brake light.
Here in MN anything that's on your tail light that didn't come from the factory is illegal. as far as the reflectors in the tail lights... not every car has them some cars like mine have the reflectors built into the bumper separate from the light. Iowa should also have their state statutes online too.
ACIDBURN6661 It's definitely illegal here in Arizona, not sure about California.
Illegal in California but people still do it
ACIDBURN6661 who cares about California everything there is illegal lmao
I feel that rubbing off the parts that emits the brake lights will do. The nightshade on the outer region will give it a pretty decent fade off effect
Why didn’t you show the damage you did to the right tail light
What damage?
@@elomeli211 I think he's talking about overheating the plastic... seems fine to me.
Mine are being tinted right now. Good to see how it's actually done 🙂
could have done all 4 lights with that piece ;-p
Seriously...he wasted so much material
They must charge per sheet + labor. Lol probably made $300-400 bucks off this poor guy. 🤦♂️
When it costs like $20 max haha
Nice video, thanks for going more into detail with this one.
indent in light could easily be filled with Super/Krazy glue ( Cyanoacrylate) and 3000 grit paper.
Well done! Very profesional video
Great video, thanks.
Awesome job.
Step one: don't
Vinny best comment on here.
snowcat didn't expect to see you here
😂😂😂😂😂I died a little for laughing too hard😂😂😂
Step two: dont watch this
why not snowcat me no understand ?
Noice! Very instructive. I will definitely will keep this vid in mind for when I get to it. Thanks guys!
Baby shampoo works best for your soapy water lol, soap soap leaves a film/haze
IMO the best way to tint a tail light is to add a little color to the clear and triple coat it. I had a silver Chrysler 300 that I tinted the tail lights silver, rebadged, looked clean af.
What version of "Danny Brown - Grown Up" is that song in the background?
Apparently it’s a secret...
@@Manuelo1234 Yeah I've been looking for it for years. Still haven't found it lol
definitely looks better. btw with the paint, all you had to do was compound and polish them and they would have shined right up.
Just don't. As soon as the sun comes out, your lights are invisible, the point of lights is to show light. Not mask it off.
Not even true
@@splooshkaboom4210 Actually it is.
Even the light smoke tint on tail lights in bright sun light reduce the actual visibility of the lights by over 75%.
In a shop or dim light setting the difference does seem like a lot, but once you get into bright day light it very much indeed does affect the visiblity. Hence why smoked or tinted headlights and tail lights are illegal on roadways.
@@splooshkaboom4210 I have worked so many wrecks from people not seeing the tail lights it's ridiculous.
(The person with the tinted lights is pretty always found at fault as well for altering the visibility of the light)
spydergs07 cool bro.
the film is so nice bc the lights are still visible and then when they are off it looks aggressive and clean, definitely going to use the film
Looks super thick is it not the same as window tint
Nope, window tint and taillight tint are different products and work differently also
8/14/18, Super thick like the guys who do this stuff. I wouldn't, if I were you, but of course I'm not. :)
@@prestonweitersjr.9460 what % of tint is this?
@@GeronimoLogistics Light tint normally just comes in light or dark. It's not the same as window tint with %.
just got the 2018 camry tail light tint. watching this video to learn how to install haha. looks awesome! also, will a blow dryer work?
You will get a ticket and you will have to remove the tint from your tail lights FYI.
For those "bubbles", wouldn't filling them in with clear nail polish work to prevent the dimpling effect? Kind of like transparent bondo. Let it dry and smooth it with the clay-bar again.
The nail polish solvent would "fog" the plastic on the tail light. You definitely want the film bonded with the light itself not with any filler between.
Sincere Thanks. From me and my Golf GT ;') Cheers!
how to make your tail lights work less
This is such a safety violation that you can't get away with in many states. Here in Florida, although statute 316.234 states, "An object, material, or covering that alters the stop lamp’s visibility from 300 feet to the rear in normal sunlight may not be placed, displayed, installed, affixed, or applied over a stop lamp," law enforcement officials overlook it. So, in addition to speed traps to meet monthly quotas, they could meet them much quicker by impounding such vehicles; ditto for the headlights and windows. Folks go for the cool appearance factor and not safety.
@@willythehero88 calm down copy and paste
@@willythehero88 you could add brighter aftermarket bulbs that make it zero difference once you tint
@@FullOfMalarky Yes, but of the ones I've seen so far, the lights are dimmer. Safety is not their primary concern; convenience & the cool factor rule.
@@willythehero88 u can see the lights easy lol, if u cant see them u shouldn't be driving
Props my friend, very nice. I tint for Linex and our film would never allow this.
Just subscribed and great video! Do ya'll know what % tint this is?
Light tints normally come in light and dark. They don't have % like window tint.
What type of soap did you use to pick up oils and residue from brake fluid?
Looks better stock
Erick Anaya nope
p 2o bro you comment on every comment lol. Get a life
p 2o probably some white kid wanting to be Mexican or something since he can't keep Latino nuts out his mouth
Yeah, no it doesn't.
no it doesn't