Right at 4:45 talking about cutting staying on the lense side. It’s those little comments that make these videos really helpful for a first timer lol. It’s definitely something I would ask myself if\when I tried it
Followed your video. Brilliant for a newbie. The only mistake i made whilst doing it was not heating the film enough. The minute the film was heated it became nice and stretchy all became soo easy. Thanks!
It’s funny how I UA-cam searched how to vinyl wrap this and how to wrap that but nonetheless… Ck wraps always is the first recommendation UA-cam suggest
I feel like a heat gun definitly helps. Tried tinting windows but it was windy and i dont have a garage so i got that shit messed up. I still got some tint left so ima try this since i just got my windows done with ceramic tint
I'm doing a friend's car soon, hopefully it'll go as smooth as this. I tinted glass years ago and I didn't useheat. Just soapy water & a squeegee. Why was there was no heat applied to the bottom right corner, anchor point. Also that's a lot of heat.
It’s funny how easy the expensive car has the easiest shape to tint lol I just did my headlights and tail light in VViViD Air Release (light smoke front and dark black in rear) and being my first time I screwed up a bit and ordered another few rolls but I expected as much and learned what / what not to do for the next try but I bet the tail lights on my Dodge Avenger would even be a challenge for CK ! New rolls come in tomorrow and maybe I’ll do a vid , it’ll be called 2 hour light tinting for dummies by dummies lol Love the Vids bro and love the VViViD products
Great job! Looks sick CK- Larry you picked the Ace to do your install both wraps looked Great. Perfect example why to choose wrapping a car over painting a car. You change the look fast and much cheaper than switching vehicles or paint which is near permanent. Great video fellas
so the tint i bought says that it needs to be applied with water. i did an attempt but i couldn't squeeze all of the water out so i was left with water/air bubbles and adding heat only ended up making creases. should i try without water next time?
I love your tutorials. My only complaint is that you make it look way too easy lol. I bought some wrap and watched a few of your videos before trying it and learned real quick there's no substitution for experience.
Hij krimpt de folie juist terug naar zijn originele staat nadat het is aangebracht. Hij doet dit zodat de folie ‘relaxt’ is en niet later nog terug krimpt van de lamp af.
Hey man, went out and bought some vivvid tint and avery dennison baby blue for my 2005 zx10r sportbike, anytips on first time wrapping? And it being a bike?
I got a 21 Tacoma and it seems like it’s very difficult since it has recesses and then protruding areas, it’s my first time doing something like this. Any tips or tricks to help a brother out?
Smoke is just Nice. I want to tell you go crazy as if you make him some competition or show car cause you gotta. Make sure the idiots can see you say they don't learn to back in your car
Oscar Lopez be patient and use a heat gun/hair dryer to help loosen up the tint. Just cut a lil extra to remove the tint don’t wanna get your fingers under the glue where your actual headlight is
I'm looking for a good brand of tint I can source to the UK. So far not had much luck. It's either cheap ebay stuff, Vivid don't ship to UK or random expensive films that have no reviews. Can anyone help? Currently looking at APA America for film.
Once its on can you cut around the reverse lense area to get a good light instead of leaving the tint over the whole light or would that cause issues ie water to start getting underneath? Thanks
In case I missed it.. ( Great job BTW and THANK YOU!! :) ~ As far as the 'Protective film' side (on top of the exterior gloss), Do you remove this during install or after? I realize it probably won't stretch during install, but then what's the purpose? ( Silly Q probably.. I only ask as the felt squeegee seems like it would scratch up some of the more Very high-gloss films for tail lights).Thanks again! Cheers!!
It depends on the cap, some stretch and some don't. The ones that don't stretch are meant to protect the film during shipping and transport from scuffing. The other cap is meant to be installed with the film which prevent swirl marks.
depends on how dark the tint is. if it's just a light tint it won't affect it much but the darker tints can really make it a lot dimmer. hence why it's illegal in many places
Here I’m sitting with my ball of tint film seeing where I went wrong 🤣
Same xD
😂
I don’t think it’s supposed to be in a ball shape😮
Lmao me too I ordered another roll 😂
@@Desidudeinusa trust me, it will end up the same way…. Personal experience
After watching a few of your videos i decided it was finally time to tiny my tails. BOY ITS HARDER THAN YOU MAKE IT LOOK
Right at 4:45 talking about cutting staying on the lense side. It’s those little comments that make these videos really helpful for a first timer lol. It’s definitely something I would ask myself if\when I tried it
This is probably the best video out there on tinting lights
Frrr
That tint looks so sweet on rear lights. Nice job !
You make it look effortless. Great job 👍👍👍👍
Followed your video. Brilliant for a newbie. The only mistake i made whilst doing it was not heating the film enough. The minute the film was heated it became nice and stretchy all became soo easy. Thanks!
how much did you buy for your needs ? i don’t wanna order too much and have a shit ton of extra i don’t need
It’s funny how I UA-cam searched how to vinyl wrap this and how to wrap that but nonetheless… Ck wraps always is the first recommendation UA-cam suggest
Always a clean install with CK Wraps! Nice work! Love the light, smoked tint used here, this really completes the look!
Why you gotta make EVERYTHING look so easy!!! Lol
i can’t even install a screen protector on my phone without any bubbles this shit seems impossible af for me lol
@@compacheo603 practice man, you will get there
I feel like a heat gun definitly helps. Tried tinting windows but it was windy and i dont have a garage so i got that shit messed up. I still got some tint left so ima try this since i just got my windows done with ceramic tint
Thanks to your vids I am confident I can tackle me tinting projects. Thanks...
this tail light is a piece a cake
G'Day Christian, wow that looks insane, just a nice level of tint not too overboard. As usual a top job....cheers.
Dam… I wasted almost 2 hrs on one headlight trying to do it my way…. Literally took 2minutes with the help of my wife after this video. Thanks man 😂
Oh i have the confidence to tint my rear lights now thank you
Romania here🙋♂️
I like you and you work😍💙
I'm about to try tinting my taillights. Wish me luck. I'm gonna mess it up so bad lol
How'd you do?
Loving the new color on the wrap.....nice!
Aepek looks like we got a early preview
I freaking KNEW I recognized that place and that car. CK & AMMO, hellz yea.
I'm doing a friend's car soon, hopefully it'll go as smooth as this. I tinted glass years ago and I didn't useheat. Just soapy water & a squeegee.
Why was there was no heat applied to the bottom right corner, anchor point. Also that's a lot of heat.
It’s funny how easy the expensive car has the easiest shape to tint lol I just did my headlights and tail light in VViViD Air Release (light smoke front and dark black in rear) and being my first time I screwed up a bit and ordered another few rolls but I expected as much and learned what / what not to do for the next try but I bet the tail lights on my Dodge Avenger would even be a challenge for CK ! New rolls come in tomorrow and maybe I’ll do a vid , it’ll be called 2 hour light tinting for dummies by dummies lol
Love the Vids bro and love the VViViD products
Great job! Looks sick CK-
Larry you picked the Ace to do your install both wraps looked Great. Perfect example why to choose wrapping a car over painting a car. You change the look fast and much cheaper than switching vehicles or paint which is near permanent. Great video fellas
I want to do my lights but other tutorials I've seen are using soap and water instead of heat to apply the tint what's the difference?
so the tint i bought says that it needs to be applied with water. i did an attempt but i couldn't squeeze all of the water out so i was left with water/air bubbles and adding heat only ended up making creases. should i try without water next time?
I want to see how you tint the tail lights of a Challenger 2018, put the tint the tail lights are so difficult for me!
I love your tutorials. My only complaint is that you make it look way too easy lol. I bought some wrap and watched a few of your videos before trying it and learned real quick there's no substitution for experience.
looks great de tail lights are smoke on my car and im gonna try to do this too with the headlights
I always get wrinkles in those cheap precut wraps.
Any advice?
Can you use the blue painters tape? Or does it have to be that specific kind?
Any tape
Super heavy hitter combo you two make together.
Is a heatgun totally necessary or can a good hot hairdryer work ?
Might be a stupid question but are you supposed to squeeze in on the edges? How do you avoid a flap on the ends?
@ckwraps please please do a turorial on front and back on tesla model 3
Hi. I watching a lots your videos, I can't find Mustang 2005-2009 tail lights vinyl wrap. Do you have any video or You can do some video in future?
Can you use a blow dryer instead of a heat gun?
Had mines for 2 years I want to remove and install new one how do I remove the glue ?
Could you link the type of squeegee you use please?
I just got my first car here in Toronto, I was wondering if it is legal to wrap my tail lights using this exact film?
I don’t understand how he got it so perfect I got close but still got one wrinkle still looks fantastic
5:45 you didnt leave that like that did you? or did it tuck under or something
I want to know if you can install it with a water spray with a bit of soap
What do you do if the tail light has a lil moister circle? I think that’s what the hole is for.
I think they're casting points in the mould
CK Wraps so when applying the wrap over the tiny circle it makes a small bubble. Is there anyway to fix it?
What temp you have your gun set at?
There’s no need to wet the taillight before applying like how you do windows?
Can you ise window tint and do the same method or does it have to be a certain type of taillight tint film
I’ll let you know tomorrow . 5 windows and two rear lights to do 😅😆
How hard to remove tint and adhesive when reverse ?
You don't use soapy water on tail lights? Just wondering because I want to do my lights.
Doesn't adding heat at the end create tension, which shortens the life of the vinyl?
Hij krimpt de folie juist terug naar zijn originele staat nadat het is aangebracht. Hij doet dit zodat de folie ‘relaxt’ is en niet later nog terug krimpt van de lamp af.
Hey man, went out and bought some vivvid tint and avery dennison baby blue for my 2005 zx10r sportbike, anytips on first time wrapping? And it being a bike?
Damn CK and Ammo teaming up?! And here I was thinking The Rock and Kevin Heart were heavy hitters damn!
Is this the exact same material as the lux light wrap?? The air release in the lux is very noticeable..
Trying to figure out why my squeegee just scratches the tint after barely touching it 😅
Nice film wrapping. Was that noise at the end cutting the film you scratching the bumper? Just curious what it was.
can you make a video for ford focus mk3.5 tail light? I failed many times...
Can we use same technic to wrap visor of our helmet? Actually im asking that heating process. Will it work on non flat surfaces?
The tail light isn't a flat surface...
@@josiahkaufman393 i know. But my visor has so many corners and edges. So this tail light is more flat than my visor :))
Can I use hair fan sir????????
Will a hair dryer do the trick or do I need to buy a heat gun? Great videos, btw!
You can buy a cheap heat gun for usually less than a hair dryer. I'd opt for the heat gun.
@@CKWraps got it! thanks!
What percentage of tint is that plz?
Super helpful bro!
this tail light is piece a cake
Great informative video Chris as usual.
I got a 21 Tacoma and it seems like it’s very difficult since it has recesses and then protruding areas, it’s my first time doing something like this. Any tips or tricks to help a brother out?
Have you tried using luxe light wrap if you have what do you think of it ?
What temp does the heat gun need to be at??
Noob question: When you use the knife, do you keep in in the gap (empty space) or drag it along the tape or the edge of the car.
ArnaProduction1 that’s a great question! I want to ask the same thing but this balding prick doesn’t answer questions
Well if you watched the video he says more on the lens side than the vehicle side in the gap.
Smoke is just Nice. I want to tell you go crazy as if you make him some competition or show car cause you gotta. Make sure the idiots can see you say they don't learn to back in your car
What kind of tint film is this
Good vid, helped a lot
I tried this on the taillights of my 2008 Dodge Charger. Seems impossible. Please help.
Oscar Lopez be patient and use a heat gun/hair dryer to help loosen up the tint. Just cut a lil extra to remove the tint don’t wanna get your fingers under the glue where your actual headlight is
Looks ace! You’re awesome,!
Nice video. Can you use regular window tint for the taillights?
No
Thanks
Where can we get that heat gun tho?
which % of alcohol cleaner should u use to clean before wrapping the car?
sord267 70% isopropyl. Some people dilute 50/50 with water.
@@Hawc1987 is it advised to dilute it ? or will it just be fine as it is?
Does the VVivid tint come off easily ? Thanks
Super cool makes it look so easy Great work man 👍💪
Nice work
Thanks for the video
Hello. Oracal 8300 or vivid ?
I'm looking for a good brand of tint I can source to the UK. So far not had much luck. It's either cheap ebay stuff, Vivid don't ship to UK or random expensive films that have no reviews. Can anyone help? Currently looking at APA America for film.
What percent do u put on?
I tride so hard, but the bubbles keep coming 😣
1st comment...Bro u r my teachers
please do a video about knife cutting technic! thx
Hey what % is the tint you use on there
You use VLT 5%?
what % was it
Once its on can you cut around the reverse lense area to get a good light instead of leaving the tint over the whole light or would that cause issues ie water to start getting underneath? Thanks
You are good! This may sound strange but I enjoy your way of using pronouns to make the viewer feel involved. Good stuff
What % tint is this?
In case I missed it.. ( Great job BTW and THANK YOU!! :) ~ As far as the 'Protective film' side (on top of the exterior gloss), Do you remove this during install or after? I realize it probably won't stretch during install, but then what's the purpose? ( Silly Q probably.. I only ask as the felt squeegee seems like it would scratch up some of the more Very high-gloss films for tail lights).Thanks again! Cheers!!
It depends on the cap, some stretch and some don't. The ones that don't stretch are meant to protect the film during shipping and transport from scuffing. The other cap is meant to be installed with the film which prevent swirl marks.
i am 0:09 of the video, and laughed that the title is 5minute and the video is 7:32 ;)
Some time was spent talking but the actual work being done took about 5 minutes
@@CKWraps i know 😉
@@CKWraps great video btw
next.. do the front lights with STEK DYNO light smoke ;) PPF
Slick. 😎
Don't let the video fool you. This man is participating in the dark arts
Me and Larry have the same pinky’s 👀🤣
Does tinting the headlights affect the light visibility? Is it dimmer at night or is it just as bright ?
Just as bright
depends on how dark the tint is. if it's just a light tint it won't affect it much but the darker tints can really make it a lot dimmer. hence why it's illegal in many places
Great
Sweet👍