WMO Still - Old Reformer run (archive video).

The main parts of reformer are put together and WMO distillation performed.
In this video I explain a bit about the reformer construction, show how easy it is to assemble the unit, where to add silica gel and show how unit works.
www.ferromit.c...
#distillation #blackdiesel #diesel #pyrolysis #refinery

[@KhalilSalim-b9v]

Alex thank you for your informative videos.
By the way : do you have to maintain high pressure of oil vapours (gases) inside the reactor and inside the condesing pipe ?
Is high pressure necessary to convert used oil to fuel ?
If high pressure is necessary,
do you use a oneway valve for feeding used oil into the reactor
(to prevent hot vapours from escaping from reactor into the oil feed pipe) ?

[@santeryi9]

hi, there is no pressure at all, everything is happening at atmospheric pressure, so, no pressure necessary, just temperature.

[@jakubm1875]

​@@santeryi9 +-400c ?

[@santeryi9]

@@jakubm1875 410c

[@clebersonsilva2642]

Bom dia Alek

[@santeryi9]

Bom dia, tudo bem, como está o tempo?

[@clebersonsilva2642]

Hoje fez muito calor aqui entorno de 38° graus

[@santeryi9]

@@clebersonsilva2642 O sul da Nova Zelândia é bom e confortável, geralmente entre 12 e 16ºC à noite, embora às vezes possamos chegar a 22ºC escaldantes.

[@clebersonsilva2642]

@@santeryi9 aqui p mim esse clima já seria muito frio 🥶 quando morei na África do Sul fazia -9° as vezes aqui no Brasil tem regiões que ultrapassa os 45°. Alek vc já tentou fazer Bio combustíveis com fumaça? ,eu estou desenvolvendo um sistema capaz disso da um Bio combustíveis de ótima qualidade

[@santeryi9]

@@clebersonsilva2642Não, não tentei fazer combustível a partir da fumaça, mas com a ajuda de conversões catalíticas é possível fazer combustível líquido a partir de combustível gasoso.

[@AmericanMade00]

I have a question about Your waste oil distill plans if they were purchased. How much does all the material cost not including the time it takes to fabricate everything?

[@santeryi9]

The cost of the materials depends on the type of metal chosen, such as black or stainless steel. Also, if metal is bought from a dealer or a scrapyard, local market prices will dictate the cost. I do not know your location and metalworking skills, so I can not say for sure the cost at your particular place and situation.

[@AmericanMade00]

@@santeryi9 what about the temperature controller

[@alexromale8953]

Предлогаю партнерство,, открываем компанию, например, Рога и копыта,,,, и погнали, Идеи наши а деньги ваши, но я как честный человек всю прибыль буду делить попалам,, кажется некого не обидел.