Observation's 1.Stirrups are not bent 135 degrees. 2. Development length not provided in the beam. 3.spacing of stirrups not maintained 150 mm or 6 inches 4.laping of beam should be done at the distance of L /3 but you provided at supports . 5.Above slab Column rods are too short due to this not possible to lapping. 6. Recommended for 1 slab rods 10 mm main bars and 10 mm distribution bars to be maintained. 7.There is no Crank bars/ Bentup bars in a beam. 8. Covering blocks 20mm not provided at the slab. These are the mistakes, hope you understand. Thank you. Rajasekhar. Civil engineer
Nicework
Keep going
Excellent Thomas keep it up
Nice idea
keep it up babai
చాలా న్యాచురల్ గా, చేసిన పనిని అద్భుతంగా చూపించారు....
సూపర్🎉🎉
@@venkat-shailu399 ధన్యవాదాలు కత్తి
Very good explanation, keep going on brother ❤
Hord work
Very good explanation 😅
@@maheshkesagani6638 TQ
Exllent thammi
Nice veiw... Super
Good morning brother ,, excellent
Keep it up
Good explanation Anji bhai… but few dialogs and work clips are repeated …
Ok TQ sir ...ur advance
Good idea
Fofect😊
అద్భుతంగా చెప్పారు బ్రదర్
@@MaheshMeesala-lg8ub TQ thammi
Super explanation
నైస్ vaice
Super work ....but be care full
Chala Baga chepparu... From hyd😊
Chaa bagundhi
చాలా బాగా చూపించావు అంజి
TQ suri
Super bro maaku theliyani vishayaalu chupinchaaru
Chala Baga chepparu bro....from Karim nagar
@@Uppulasrinivas-m1j TQ
But care full
Observation's
1.Stirrups are not bent 135 degrees.
2. Development length not provided in the beam.
3.spacing of stirrups not maintained 150 mm or 6 inches
4.laping of beam should be done at the distance of L /3 but you provided at supports .
5.Above slab Column rods are too short due to this not possible to lapping.
6. Recommended for 1 slab rods 10 mm main bars and 10 mm distribution bars to be maintained.
7.There is no Crank bars/ Bentup bars in a beam.
8. Covering blocks 20mm not provided at the slab.
These are the mistakes, hope you understand. Thank you.
Rajasekhar.
Civil engineer
Thank you sir your valuable information...
I will receive the mistakes
Thank you so much
Chala bga chepparu....
Chala Baga chepparu.......anji from nutanaal
@@ChamakuriSathish TQ
Rod bending supre
....
జై భీమ్
Good day
Ekkada e work
Koncham ardham aindi
Slab MAdhyalo 8mm vadite saripotunda 10 kuda na? Edhi strength ekkuva
Room size ni batti vadaali..10mm
E room ki e strength ok
@anjimeesala5051 1150 square slab area 8mm saripotundha?
Enti bro four jaints ok dhaggara vesaru
@@nanimaganti8675 పిల్లర్ ని దాటి వచ్చిన తర్వాత జాయింట్ బ్రదర్ అది...
పిల్లర్ అవతల జాయింట్ ఉంటది పిల్లర్ ఇవతల జాయింట్ ఉంటది చూడండి ఒకసారి మీరు
Good idea