i got the slip on (all they offer) for my kq 750. I love that exhaust. between that the m109r injector and the copperhead ECM it woke it up for a big single. RJWC highly recommended
I would’ve been up at the dealer you bought that machine from RAISING HELL with the service manager . Can you imagine if you wouldn’t have caught that?! What kind of QC does that dealer have?! Absolutely inexcusable, but i commend you on keeping your cool on video .
Do you have a sound clip for the dual exhaust that is quiter that is to loud and with the tuner what horse power increase are we looking at? And were can we buy it from.
I just installed the system on my 2024 can-am outlander xmr, and I don't really like it. It's not evenly tuned. Most of the exhaust exits from the left side muffler as you face the rear of the bike. 😢
Video great. Noticed you don’t have any cv boot guards on? No need in your area or next to come? I love can-am but they need protection like the grizzly has where I ride or they will be chewed up in no time.
Hey man I have a question, I’m doing a full rjwc exhaust on my 21 xmr 850 outlander. Do I need new donuts for the headers? Or do you reuse the old ones? Thanks in advace
hey Mark thanks for asking - if you can message me through my website I'll work it up for you - email is a lot easier than on here. www.powemodz.com. can please let me know where you live. thanks for asking and thanks for watching!
I had my CanAm ( Outlander 550 v twin for 3 years and the replaced the fuel pump 4 times and still didn't get it right. And they wouldn't give me another on to replace the Lemon they sold me. I ended up trading in for a Polaris, and I love it. Screw CanAm and there product they Don't stand behind.
PowerModz I have one and I smoke every canam in my Town btw their atvs are modded, more clearance, wayyyy better tires the 4 wheel drive doesn’t take an eternity to kick in, and most importantly it doesn’t break every other ride.
When are you going to put assasinators on it? Once you do you won't want to run anything else, I have a set on my renegade 1000 xmr I won't buy anything else.
Mine is stock other than the assasinators and I can go more places in 2 wheel drive than the other machines running out laws or the incrypted itp. They do pull hard and are heavier. A couple of others have bought them in my group and are happy with them.
ya for sure...with those lugs they will grip like mad. I'll probably try a set of them to compare....im hard on bikes and utvs..Tall lugged tires in my area shred axles and diffs:)
I have not even shredded the stock belt on either one of my renegade 1000 plenty of CV boots, I even keep some CV boots on hand for both of them. 29.5 assasinators will fit on the xmr renegade w no lift I don't know about the outlander. The only problem I have had is the lugs on the RF tire ripping the inner fender out. I might install spacers to set the wheels out a bit.
Hmmm, the video title says "full dual". From what I see in the video it is exactly the same as factory with the exception of having a second muffler. Is there a "real" dual exhaust for these bikes? I am not a fan of fake dual exhaust, I would like two separate pipes and mufflers from front to back.
i got the slip on (all they offer) for my kq 750. I love that exhaust. between that the m109r injector and the copperhead ECM it woke it up for a big single. RJWC highly recommended
You going to do a install video on your snorkel kit
1400 and change for the system. I just ordered one.
Do you think a new exhaust and tune would void the warranty ?
I love the exhaust is there a way to make the exhaust quieter? I have a 2022 1000R limited how much is it and what is the best tuner?
Great vid. Thanks for sharing.
Do they make a quiter exhaust>???
I would’ve been up at the dealer you bought that machine from RAISING HELL with the service manager . Can you imagine if you wouldn’t have caught that?! What kind of QC does that dealer have?! Absolutely inexcusable, but i commend you on keeping your cool on video .
Are those exhaust rings needed in the front and back
Which exhaust setup sounded better? Louder? Single or dual? Could you tell the difference from stock to exhaust/tuner?
Leave the front half of the wheel well plastics off. Get better air flow through the engine compartment.
Damn good video
Do you have a sound clip for the dual exhaust that is quiter that is to loud and with the tuner what horse power increase are we looking at?
And were can we buy it from.
Nice video! What's the weight difference between the stock, single slip on and full S/S dual exhaust?
You doin 1/4 mile runs?
@@BigInjun05 nope, just curious on the weight difference.
what make of power washer do you use . . .
I just installed the system on my 2024 can-am outlander xmr, and I don't really like it. It's not evenly tuned. Most of the exhaust exits from the left side muffler as you face the rear of the bike. 😢
Is the single less loud than the dual? Not sure which one to get.
awesome! you should look into a renegade
I might for next year - or a highlifter
PowerModz renegade
Plan to do some aftermarket floor boards? Would be a good video.
What if I done do the tune ?
When are we going to see a SHERP at the powermodz shop?
I dont roll in that kind of cash man....wish I did!
Video great. Noticed you don’t have any cv boot guards on? No need in your area or next to come? I love can-am but they need protection like the grizzly has where I ride or they will be chewed up in no time.
I do now! Full Rival skid plates
Can I do this exhaust upgrade to a 850xt?
How much hp trq does it add?
What if I don’t do the tune
How much is it now
What is that kit called
did you do a video on the sorkel kit
No we weren't allowed to
HOW MUCH IS IT?
I’m going to need a Tuna? 🤔
Hey man I have a question, I’m doing a full rjwc exhaust on my 21 xmr 850 outlander. Do I need new donuts for the headers? Or do you reuse the old ones? Thanks in advace
Hmm, I think they come with new ones.
I'm thinking about a slipon split duals setup, will this reduce heat around the foot well area?
Without a tuning system it will melt plastic
How much does that system cost for a 2018 renegade xmr 1000? Thanks love your videos
hey Mark thanks for asking - if you can message me through my website I'll work it up for you - email is a lot easier than on here. www.powemodz.com. can please let me know where you live. thanks for asking and thanks for watching!
PowerModz I will be getting in touch with you on your site soon. Thanks
Needs something to replace the cheap bumper on the rear
I had my CanAm ( Outlander 550 v twin for 3 years and the replaced the fuel pump 4 times and still didn't get it right. And they wouldn't give me another on to replace the Lemon they sold me. I ended up trading in for a Polaris, and I love it. Screw CanAm and there product they Don't stand behind.
My man! Couldn’t find this for the brute force on your site.. help a brother out?
i have 2 single full systems in stock cheap! contact us at www.powermodz.com
Are you going to get a highlifter still ?
im on the fence
PowerModz I have one and I smoke every canam in my Town btw their atvs are modded, more clearance, wayyyy better tires the 4 wheel drive doesn’t take an eternity to kick in, and most importantly it doesn’t break every other ride.
Tell me someone how price is for that quad??? Thanks!(pls price in euros)
When are you going to put assasinators on it? Once you do you won't want to run anything else, I have a set on my renegade 1000 xmr I won't buy anything else.
from what Ive seen they dont rock any better than what im using in my area, I would if I added boost or big bore - for skimming.
Mine is stock other than the assasinators and I can go more places in 2 wheel drive than the other machines running out laws or the incrypted itp. They do pull hard and are heavier. A couple of others have bought them in my group and are happy with them.
And you don't have to skim with assasinators you can crawl thru a hole or skeg if you want. Or you can blast thru if you want to.
ya for sure...with those lugs they will grip like mad. I'll probably try a set of them to compare....im hard on bikes and utvs..Tall lugged tires in my area shred axles and diffs:)
I have not even shredded the stock belt on either one of my renegade 1000 plenty of CV boots, I even keep some CV boots on hand for both of them. 29.5 assasinators will fit on the xmr renegade w no lift I don't know about the outlander. The only problem I have had is the lugs on the RF tire ripping the inner fender out. I might install spacers to set the wheels out a bit.
Oi Opa 😃👏👏💸💸💸💸💸💸
Hmmm, the video title says "full dual". From what I see in the video it is exactly the same as factory with the exception of having a second muffler.
Is there a "real" dual exhaust for these bikes? I am not a fan of fake dual exhaust, I would like two separate pipes and mufflers from front to back.
Joe Sylvia that would kinda be pointless. And sound like ass.
ALL That Noise.. and Never saw a Deer or moose again. hahaha
That's why i use hondas for hunting.
LOUIE, just get a boat already
I just could never take a $15k quad in deep water like that. Couldn't do it
Then don't spend 15k on a quad
Am i the only one Hoping he would start it without the mufflers
That thing looks like a nightmare to work on.
They are lol
Wfo run plz! Lol
Ducati
Should have bought a Polaris no lose hose clamps😂
It's a matter of thermodynamics ya putz.
Nah itll just burn down instead
but a whole lotta snapped axles!