Hello sir, please can you tell me something about error number 21 for a RV2000, what's means, I tried to reset many times but error is still there. All light flashing white in the same time. If I press clean him start to clean it's working but I can't connect the vacuum to the app...
Hi getting error code 27 "move to level surface" It's sitting on dock totally level?? cleaned sensors is there some kind of reset. It has been sitting a while not in use!! Any help appreciated!! Thanks
What is the green Clean, Red Dock and Red (!)? I just bought a refurbished unit and that was the error code out of the box. In the process of returning it now.
My AI self dumping vac keeps saying its roller brush is stuck,we cleaned it one end was pretty wrapped up with dog hair. We cleaned it up put back and it will not run keeps saying brush stuck. It is very Hard to turn.
Shark IQ Robot RV1001AE red explanation on,, Green light on Dock and Clean. Turned on and off. set to clean goes a few rolls then stop and error flashing continues;;;???
@@RoboRescueI have this problem with this exact unit and they are both definitely green. No entry in the manual for this. Vendor suggests motherboard problem but not sure.
Have the av1001ae model. Randomly stopped cleaning and wont turn on. On the dock, the dock lights up blue but still wont turn on. Replaced the battery, cleaned the contacts, checked for blockages, turn the side switch off/on (left on for charging), wiggle replugged battwry terminal connection. Still no luck. Wasnt connected to the app ever. Read everything i could online. Any other suggestions? Thanks
is it flashing in an alternating red then green over and over with the ! blinking , did you figure it out I'm having that issue and cant seem to find anything just yet
Hi getting error code 27 "move to level surface" It's sitting on dock totally level?? any reset or procedure to fix? Moved it several times, cleaned sensors etc. Any help appreciated Thanks
Hello sir, please can you tell me something about error number 21 for a RV2000, what's means, I tried to reset many times but error is still there. All light flashing white in the same time. If I press clean him start to clean it's working but I can't connect the vacuum to the app...
RV2500 series, just purchased never ran and error 18 right side drive wheel hard to turn. How do you fix?
Hi getting error code 27 "move to level surface" It's sitting on dock totally level?? cleaned sensors is there some kind of reset. It has been sitting a while not in use!! Any help appreciated!! Thanks
What is the green Clean, Red Dock and Red (!)? I just bought a refurbished unit and that was the error code out of the box. In the process of returning it now.
What about error 2, obstruction underneath the robot?
My AI self dumping vac keeps saying its roller brush is stuck,we cleaned it one end was pretty wrapped up with dog hair. We cleaned it up put back and it will not run keeps saying brush stuck. It is very
Hard to turn.
How much for new AI SHARK SENSORS . have a problem with the error number 7 ?
About error 7, would letting it dry or changing the sensors not solve it?
Error number 6 on the AI nothing is stuck in or on bumper don’t know what to do
I have a blinking blue Dock light, blinking red Clean, and exclamation ❗. It wont tell me an error code and is not visbile on the app. WTF. Plz help😅
Shark IQ Robot RV1001AE red explanation on,, Green light on Dock and Clean. Turned on and off. set to clean goes a few rolls then stop and error flashing continues;;;???
Was there a fix solution?
Green or blue?
Could be a stuck wheel or hair wrapped around wheel
@@RoboRescueI have this problem with this exact unit and they are both definitely green. No entry in the manual for this. Vendor suggests motherboard problem but not sure.
All lights are blinking
Blue red and explanation point
What does this mean!!
Hi I have a model RV9155WXUS v8 error six bumper sensor
Why my IQ shark robot would not go back to charging station. Please help
How to fix error 21
Have the av1001ae model. Randomly stopped cleaning and wont turn on. On the dock, the dock lights up blue but still wont turn on.
Replaced the battery, cleaned the contacts, checked for blockages, turn the side switch off/on (left on for charging), wiggle replugged battwry terminal connection.
Still no luck. Wasnt connected to the app ever. Read everything i could online.
Any other suggestions? Thanks
Cliff sensonr for ihome vaccum please
I took the wheels out and cleaned them. Cleaned the sensors, no obstructions anywhere. It was a new robot.
Clean ( green) + Dock (green) + ! (RED) ?
I'm trying to figure this out also. On the phone they told me it was a problem with the motherboard.
is it flashing in an alternating red then green over and over with the ! blinking , did you figure it out I'm having that issue and cant seem to find anything just yet
I just had this happen on mine yesterday. Called Shark and they are replacing the unit. Told its a motherboard issue.
Friggin cliff sensor error
i have one for you - Clean / Dock / Charge / Wifi all flash white and robot wont charge. Customer Support said "OH NO" - model # RV2001WRUS
Hi getting error code 27 "move to level surface" It's sitting on dock totally level?? any reset or procedure to fix? Moved it several times, cleaned sensors etc. Any help appreciated Thanks