Build up roof ( base flashing)
Вставка
- Опубліковано 6 лип 2015
- I have seen many roofers in the LA area , that apply the torch down over the bare plywood or wood, technically that is wrong, but again , nothing can stop you from doing it, this video is dedicated to every homeowner or contractor, Please help me to stop those hack roofers that do that.
Thank you.
Eric.
Thats not called a base flashing thats sanded paper. You should only use that as a fire profing. Not as a base .you still need your base rubber under your cap sheet . Your roof should be water tite before cap you still need alot of learning.
Exactly, roof should be one percent sealed before u even touch the cap, u should always look at the capsheet as its only there for looks and not to save the roof.
It's called base flashing when u overlap the base paper like he did. Ur a fucking idiot and know Jack shit about roofing.
LUV UR WAYS BEEN MOPPING AND TORCHING FOR 35 years ! VERY NICE 👍
good video Eric gracias por los tips saludos.
another impressive video, Eric. cant strip. not many know what that is or what it is for. great instruction. that double scupper is valuable information.
Thank you ,Eric great job!!
Hes a horrible flat roofer
Tow-erch. Many thanks for your valuable videos.
Nice CLEAN ROOFING
I think your corner cuts is not the same like here in europe, here we dont have any cuts and no week spots for water to come.
But keep it up you are a great worker
i love you videos
How should wood cant strips be attached? To the decking, the parapet wall or both using what fasteners? Thanks!
I am a commercial roofer also,I work for america,s largest commercial roofing contractor(centimark),but I appreciate your focus on quality bro.i do most of the detail put of our southwestern Ohio office,and I always focus on quality-do it rite the first time.dont do much torch down anymore,mostly too and occasional epdm,but I enjoy watching guys who love to roof like me,and who do it rite.much respect!!!! And be safe!!!
Have you seen the outlet?what sort of finish is that!! There seams to be mastic all over the upstands what's that in aid of? If you want to see how it's done look up bauder videos you might learn something.wheres your fire extinguisher?oh yes it's just out of shot of video!!!.what would happen if you had fire? Run down ladder and get a bottle of bud throw that on it? or drink it if house is fully engulfed in flames i have watched a few of your videos not once have i seen any form of fire extinguisher when I show the lads I work with we piss oursides. Not only at the mess of the roofs but some comments saying"nice job" unbelievable honest unbelievable.
Jason Johnson I also worked for centimark in winnipeg Manitoba. I prefer torch on besides the starting pay at centimark was good.
q tal Erick tu no usas el smoot torch. despues del base regular ? saludos
There are too many things wrong with this for me to even start, if you came on my roof and did this crap I would send you packing before you burned down your first roll !
1badmuthafutha - this guy wouldn’t know professional techniques if it came up and bit him on the nose!! He just makes up his rules as he goes. The overflow scupper has a NRCA criteria, not just what he makes up on his video!
Wall flashing also has a spec which he does not follow! He doesn’t know any better but talks like he does! Which just pisses off the REAL journeyman that learned their trade correctly and applies those proper techniques everyday!
A lot of ppl with different opinions, fact is in different parts of the world standard change. Maybe in California this is allowed and used cause they don’t have to worry about sitting snow and build. But where Soprema is a used mod bit system (torched on roofs) you could nail and sanded back base with a poly on top keeping nails 12” apart on the rolls and every 6” on the bottom lap. The overlapping base would be torched at the seam.. Buen trabajo brother pero aquí en Canadá no se pudiera hacerlo así!
You did not enbed the granules
All wrong, nothing even close to ARCA standards for the cap. For what i glances at, base looks good
you are not supported to torch onto that crappie base sheet. It has a sanded surface. . you need to use the torch applied base. for those who don't know its the same material as the cap sheet but it is smooth, then you can torch the cap sheet on the smooth base. remember to stager the seams
seriously ...you are not a roofer, or maybe you are a roofer but ...one of those roofers that you can count by 1000's , you talk like if you really know about this trade .
I strongly suggest you to learn how to be a roofer , practice and most important ...
read books ....READ , READ & READ .
so far your comments makes no sense .
I will call it a NONSENSE.
good luck roofer apprentice.
I have been in the roofing business for 29 years. I use soprema systems and I am certified by the manufacturer. first off you are supposed to screw down protection board, torch on base sheet then torch down cap sheet. that my friend is the right way
Chuck Taylor King ...Again , this product IS NOT Soprema , soprema makes this refective materials and cap sheet and has it's own system , if you were a roofer , you have to understand that any build up roof can be installed over plain wood and concrete without the need of insulation board, when you install cap sheet over base sheet it's called : 2 ply torch down , if you add smooth it's called 3 ply system and so on .
so far you say you are a roofer , but don't know the basics, I suggest you to go back and learn the basics , that usually happens when you don't have school .
good luck in your journey .
Roofing Solutions By Eric Garcia the problem is that you are to cheap to get the right materials, and soprema manufacturs many types of cap sheet. go on the Internet and have a look. do you know what protectaboad is its a4'×5' 1/8" thick semi rigid board that can be mechanically fastened, then you torch down 180 s.b.s. base then you torch on top of the base with a 250 s.b.s. cap, make sure that you stager the seams. I am just telling you the best system to use. just look it up
Roofing Solutions By Eric Garcia oh ya I was roofing when you were in public school, just fucking with you, look up IKO flat roofing products they have the same systems
Hello from Germany, are this American standarts?
Did you make a kind of tongue in the corners or just cut it in and connect it to others?
I hope u understand what i mean.
this is Mexican standards... garbage roofer...
ich bin americana, han in germany. 14 jahren gewohnt, das was die zeigen hier ist voll kaka!! in deustchland hab 12 jahre lang flach dach gemacht!!
@@whoville90 lol
You didn't use a second base?
That's the way we work 👌 good job
Horrible work
You faked that bleed our in the corner. Looks like crap I'll pull all that stuff rite up. I'm jus kidding with you looks really good guys your guys are hard worker treat them rite and they will treat you rite.
Ever heard of flam or peel and stick. If your cap fails roof fails
what a mess !
Saludos desde RD pol favor si me puedes decir cuantos paga ese trabajo por oras en estado unidos esa es mi protección y quiero aser ese trabajo en estado unidos
tienes que ponerle flashing atodo arrededor asi es como debe de ir
+cheno melero with all the respect, you must be a handyman, your suggestion doesn't make any sense , please don't try to install roof on your own , your ideas won't go well on a roof project...have a nice day!
Eric.
2:59 no 45° or round corners
Mickey mouse 2 me
dutch roofer here. Think our system is a lot better than you guys are doing. Seen a few roofs this summer in calafornia and i wasn't impressed with the look but if they are water tight then fine
Can you send me a video of how your system is applied? I’m in Canada.
Stick to shingles buddy
Looks good. Good attention to detail.
Really bad.
Base flashing also known as TPO right?
Daxon Jose no
Thats a different system
Nice work.
Poor job
Sese
Mickey mouse hahaha be a man not mouse what are they man or mouse haha they Mickey mouse
Disgusting
Horrible job...
What a fucking mess
Terrible work! Sloppy!