SCX24 JEEP GLADIATOR 2.0 BUILD - STAGE 2: PAINT, BODYWORK, EXOCAGE, LIGHTING, SCALE DETAILS, MAGNETS
Вставка
- Опубліковано 26 лип 2024
- Finally finishing up my 2nd Gladiator build! This stage is focusing on the bodywork, fitment, and paint as well as the final scale details and lighting. Enjoy! #scx24 #moforc #axial
Full Build Series Here: • SCX24 JEEP GLADIATOR 2...
(Don't forget, you can watch at faster speeds in "Settings" to save time!!)
0:00 - INTRO
0:38 - BODYWORK/PAINT PROCESS
3:07 - BODYWORK NOTES
6:36 - PARTS OVERVIEW
8:47 - HANDLES/ROLLBAR/SPARE
9:35 - EXOCAGE OVERVIEW
11:48 - EXOCAGE INSTALL NOTES
13:40 - HEADLIGHT BUCKETS/LIGHTBAR
15:48 - LIGHTBAR FITMENT
16:37 - INNER FENDER CLEARANCE
19:17 - MAGNET ADJUSTMENT
20:38 - TAIL LIGHT HARNESS/WIRING LAYOUT
24:32 - HEADLIGHTS/MIRRORS/WIRING/ROUTING
28:09 - TAIL LIGHT INSTALL/SCALE DETAILS
29:07 - WEIGH IN (1ST)
30:31 - WEIGH IN (2ND)
31:33 - REVEAL/FINAL LOOK
33:55 - LIGHTS ON
34:54 - FINAL THOUGHTS
36:07 - GALLERY - Авто та транспорт
That’s an awesome rig looks amazing!
@@Cad1900 🙏 thank you! It is one of my favorites. Super scale and it just works!
Very pretty Brian. I would expect nothing less.
Haha… appreciate that’s Zach.
I like the green for sure!
Oh man, me too! Looks killer against the bronze and the white.
Very nice build Brian. I love the headlights. Good job
Thanks bud! Loving how it turned out!
Love that green
Hell Yeah Jim! I think it came out just great, and absolutely loving the clear windows.
Another phenomenal build 😀Great job man and many thanks for sharing the build process with all of us!🤘Everything really came together nicely on this one!!
Thank you so much!
amazing
Great build, love the detail you put into it!
Appreciate that! I’m all about that detail!!
awesome build brother love the scale look!!
Thanks man, much appreciated!
All I can say is......."NEW FAVORITE" AGAIN!!!!!! Nice work brother! How do you do it! Masterpiece.
Same here... thanks Dirk! However I do it, I sure am slow about it... haha.
@@bcochener I don't think so at all. Every time I turn around you have a new build!
Is there any chance you could show in depth which channels you have plugged each led into and where it is controlled from by the controller, my channel 4 button makes any led plugged into it flash slowly, then quickly, then it turns off, I’m unsure how you have gotten the light bar and the headlights/rear lights to turn on separately
@22:22 - You will need a cyclical switch to control two different light ports, plugged into ch4.
@@bcochener thanks
Hey any way you’d trade some stickers for some of the straight bumper mounts … love the c10 bar in the back might do the same thing
Hey buddy, I would, but I’ve got another JLU build coming I want to have some options for. Did you find them on Etsy? Adaptive Designs and Rogue Gorilla, I believe.
Awesome video sir!!🤩👍👍👍
💢Subscribed💢
Thank you, and welcome!
where did you buy door handles for jeep gladiotor?, thanku you for link, very good job
Shapeways.
What are your wires hooked to in the back before they come back up to the switch towards the front. You say in video that the headlight whip will go back to he switch but I didn't see one back there in the video. Thank you
Nothing. The headlight whip just has to go to the back (hinge) and come back up to the cyclical switch on the slider. To make the body hinge work. Otherwise you could not open the body.
Just a long headlight wire rout due to the rear hinge.
You can see the routing @33:00. It’s just providing slack for the hinge to open.
Thank you so much for the video and the info..I've been trying to figure how to do headlights 👍🤛
Nice gladiator what rims and tires combo are using?
WTMicro Rhinos w/ TSL Narrows
What did you use for the CB antenna?
Just made it from wire, shrink tube, and I wound a wire coil for it @28:34
🥰🤩💥💯👍💪👏👏👏
Thanks for always tuning in!
Just put wheels on a brick!!!!! 😆 Jk
Well, I drive an FJC in 1/1, so I’m all to familiar with a brick on wheels! LOL.
@@bcochener 🤣🤣🤣