Thanks for this view of pro-mod. I like these cars. partially because they have so many of the older car bodies used. Nothing like watching 57 chevs, 67 camaros, 63 corvettes, and all those good looking cars
Thanks for this guys! This is brilliant to watch, as for those of us that can only dream about such high level motorsport, this really does give us an insite into what it takes to get one of these monsters ready. Great job and thanks :)
These are the 'hidden heroes' of the sport, as the spectators usually just associate the driver with the car. There is a lot more going on than just the car making a run down the drag strip, so thanks for the look behind the scenes. It's interesting to note that the transmission isn't usually pulled after each run to service the clutch assembly by resurfacing the floater plates to ensure flatness, and also to check the wear on the clutch discs, all in an effort to maintain repeatability or consistency from one run to the next. Regardless, thanks for the video.
Chevy Fan Fast turn round on race day means that we don't routinely pull the transmission/clutch unless the check with the dial gauge shows a problem or the trace shows shows a problem. Typically we do full service on the clutch each day of qualifying, which for us is every two runs. We do carry a clutch grinder and use it as necessary.
1st off,the narrerator needs to put some bass in his voice,like a man does. 2nd,he needs to change his accent to straight American,like the rest of our dumb-asses! Dilly-Dilly!!!
they tow it around by the blower? fuk if that doesn't say bad ass I don't know what to tell you ( it's probably a tow bar just in front of the engine it just looks cool I guess)
did they not have a right hand drive? or is it a drag racing rule? I'm baffled as to why an aussie or britt sounding team would want to race on the American side of the car.
+Atlas Mason. The main reason is that torque reaction at launch lifts the left of the car which makes the load on rear tyres uneven. Now we try to manage this with anti-roll bars but traditionally we use the weight of the driver to help reduce the torque effect. Of course the driver isn't just a weight !!!
MortenBandit lol, not sure if youre just joking or not, but in case you're serious, ill reply. this isn't an American team or an American track. where ever they are cars are right hand, not left hand ( ie American) drive. for the reason Andy said though, they still build their pro mods with the steering in the left. I hadn't considered how unsettling that could be for the driver.
what do u mean? this car here is a 3 speed. for a lenco, count the actual planetary sections (the ones with shifter linkages or air pods on the top) and then add 1. that gives you how many gears that particular lenco transmission has.
We're limited to 3 speed by the regulations. We do sometimes play with gear ratios depending on track conditions. If you're not familiar with Lencos think of them as a series of two speed transmissions joined together, as slowpoke says we have two which gives us 3 combinations of ratios.
![Zac’s 572ci BIG BLOCK Squarebody is a 700HP MONSTER! [4K]](http://i.ytimg.com/vi/s4XDFlb01Jo/mqdefault.jpg)
My promod is an 89 fox she's finally done can't wait to get some runs in
Thanks for this view of pro-mod. I like these cars. partially because they have so many of the older car bodies used. Nothing like watching 57 chevs, 67 camaros, 63 corvettes, and all those good looking cars
Loved the presentation and learned a bit about how these machines are maintained between rounds...Thanks!
A very interesting video, the level of preparation and engineering in these cars is stunning.
Very well put together video, really enjoyed it!
Thanks for this guys! This is brilliant to watch, as for those of us that can only dream about such high level motorsport, this really does give us an insite into what it takes to get one of these monsters ready.
Great job and thanks :)
Pro Mods are my favorite race cars there just Monsters of the track!!!!!
Lol the 2 old guys doing bottoms end rule 🤣🤣nice vid you did a great job
Super video, learned a few new things from inside the pit view. Really would have preferred to see the in car camera on the run though!
Great vid! Tell them boys they did a fine job
Why does the orange car remind me of snot rod from the movie “Cars” 😂😂😂😂
great video! so informative cheers guys!
Great video
Did anyone keep rewinding to 1:22 to hear the other car coming down the track?
Do you think Street outlaws Kye Kelly's "the shocker" is a promod
hat was really awesome to watch!!!
very interesting video. well done and thank you.
very very nice video
Outlaw pro mods Ennis Texas ...June 3rd can't wait
love the car
great video. nice job. nice mod!
These are the 'hidden heroes' of the sport, as the spectators usually just associate the driver with the car. There is a lot more going on than just the car making a run down the drag strip, so thanks for the look behind the scenes. It's interesting to note that the transmission isn't usually pulled after each run to service the clutch assembly by resurfacing the floater plates to ensure flatness, and also to check the wear on the clutch discs, all in an effort to maintain repeatability or consistency from one run to the next. Regardless, thanks for the video.
Chevy Fan Fast turn round on race day means that we don't routinely pull the transmission/clutch unless the check with the dial gauge shows a problem or the trace shows shows a problem. Typically we do full service on the clutch each day of qualifying, which for us is every two runs. We do carry a clutch grinder and use it as necessary.
Very Cool !
where can you buy these drag cars? any websites?
Well, Andy Robinson builds them www.robinson-race-cars.co
AWESOME!!!!!!!!!!!!!!!
Excellent.
Interesting! Thanks!
I like the car
1st off,the narrerator needs to put some bass in his voice,like a man does. 2nd,he needs to change his accent to straight American,like the rest of our dumb-asses! Dilly-Dilly!!!
GOD DAMNNNNN!
I for got how easy it is to work on a alky car 🤣 the can didn’t even come out of the car
That was obviously a good day...
they tow it around by the blower? fuk if that doesn't say bad ass I don't know what to tell you ( it's probably a tow bar just in front of the engine it just looks cool I guess)
There is a plate sandwiched between the blower and the hat which is used to attach the restraint straps, it also has a hole to attach the tow rope.
is that the same female thats dating boosted gt guy from streetoutlaws >?
Interesting
did they not have a right hand drive? or is it a drag racing rule? I'm baffled as to why an aussie or britt sounding team would want to race on the American side of the car.
+Atlas Mason. The main reason is that torque reaction at launch lifts the left of the car which makes the load on rear tyres uneven. Now we try to manage this with anti-roll bars but traditionally we use the weight of the driver to help reduce the torque effect. Of course the driver isn't just a weight !!!
Andy Robinson I feel silly for not thinking about that. Left hand side of the car better for drag racing got it. Thanks!
American side ??? :)
MortenBandit lol, not sure if youre just joking or not, but in case you're serious, ill reply. this isn't an American team or an American track. where ever they are cars are right hand, not left hand ( ie American) drive. for the reason Andy said though, they still build their pro mods with the steering in the left. I hadn't considered how unsettling that could be for the driver.
@@merstrand ikr
👊✌
Great video, I wish it had subtitles at times I could not hear the voice over the background sounds.
Mmmmmm Stephanie...
Audio is all messed up.
Sorry you had a problem Mikey, seems OK to me now
It definitely fixed.
I was enjoying the video until I saw Martin Hill's piece of shit jet car in the background.
Hard to understand between the accent and the narrator speaking in a low tone
This sucks withe the British narrator. I could not watch it
Well, considering they are in British, and in Britain, it's fitting. And you're a fucking moron.
what's the transmission?
Usual 2 section Lenco manually shifted
Thanks for the reply!
2 speed vs 3 speed ..how does that work out for that car?
what do u mean? this car here is a 3 speed. for a lenco, count the actual planetary sections (the ones with shifter linkages or air pods on the top) and then add 1. that gives you how many gears that particular lenco transmission has.
We're limited to 3 speed by the regulations. We do sometimes play with gear ratios depending on track conditions. If you're not familiar with Lencos think of them as a series of two speed transmissions joined together, as slowpoke says we have two which gives us 3 combinations of ratios.