from what i’ve read yes they tell you to torque the lower control arm bolts fully while the truck is on the ground. Cuz the weight of the truck needs to be sitting in order for it to properly set.
What would cause my front to still be lower than the rear after installing 3” keys and overhauling my front end with kryptonite UCA’s, tie rods, links? I got the truck it initially had 2” keys and already sit level, I got 3” keys so that I could run them less cranked, but even fully cranked it still won’t level out?!?!
I have a 2005 Sierra 2500HD and I currently have 295/70/18s. There is a little rubbing still. Not sure what size lift to get. I was told there is a stock lift GM put on that year truck or something. Do you have any insight on this and reccommendations on what size lift to get? much appreciated
Hey I need help with an overcharging problem. I have replaced both batteries and the alternator. Yet the voltmeter in the instrument cluster pegs to 19 volts. Where should I look to fix this problem?
I have a 04 lly and I bought the same kit and my truck has a 1 inch block in the rear but the leaf pack bolt/pin runs through it out the top with a nut on it and my question is that factory and do I need to remove that block to in stall the new block with the kit thanks
I see all this RC lift kits whether they are 3",6" or whatever with no body lift on 01-10 2500HD and every truck looks a different height. I know you can crank on the keys. Yours for instance looks almost like a 6" or at least taller than a 3". Did yiou crank the keys all the up?
is a 4” a noticeable difference from stock leveling kit? my buddies are all suggesting 6-9” lift kits but i really don’t wanna deal with much cutting and modifications. I see a nice cognito 4” lift that comes with everything but they insist 4” will be like nothing happened
Maybe one of you can help me.. If you put a 3 inch lift kit in a 1500 and a 3 inch lift kit in a 2500, would the trucks come out to the same hight in the end, or will the 2500 still be higher.
Could not find any information on 2019 L5P drop in fuel filter kits. Have you used any of the Fass, VSE or Fleece systems. Or do you plan on doing comparisons on these? Tha k you.
Quick question for ya. My Milwaukee impact stopped working. Lot of people say it’s the certain model that is prone to stop working. What model number do you have? I see you always using it and I only used mine maybe 10-15 times
Nice video brother short and on point. I have installed this exact kit to my 2009 truck but it is little stiff on the front specially in rough roads. Have you faced the same issue?
Lift kits are available at our website click here 👉 truckmasterdiesel.com
Have you had any problems with the lift I ordered a 3 inch one for my 2008 2500 so my tires don’t rub as bad
"If you get your finger stuck in there, I don't know what to tell ya" 😂😂😂😂
Definitely need to paint it the color of the hood it would look really good that color.
We need some more content of your l5p on the channels!!!!
aren't you supposed to tighten the control arm bolts with the truck on the ground to avoid tearing the rubber isolaters?
from what i’ve read yes they tell you to torque the lower control arm bolts fully while the truck is on the ground. Cuz the weight of the truck needs to be sitting in order for it to properly set.
What would cause my front to still be lower than the rear after installing 3” keys and overhauling my front end with kryptonite UCA’s, tie rods, links? I got the truck it initially had 2” keys and already sit level, I got 3” keys so that I could run them less cranked, but even fully cranked it still won’t level out?!?!
Awesome buddy. That's sweet❤❤
Will the same kit work for 3500 Dooley?
Can you link the sway bars?
I have a 2005 Sierra 2500HD and I currently have 295/70/18s. There is a little rubbing still. Not sure what size lift to get. I was told there is a stock lift GM put on that year truck or something. Do you have any insight on this and reccommendations on what size lift to get? much appreciated
Hey I need help with an overcharging problem. I have replaced both batteries and the alternator. Yet the voltmeter in the instrument cluster pegs to 19 volts. Where should I look to fix this problem?
What wheels are those? Would love to get a set for my 2500.
I have a 04 lly and I bought the same kit and my truck has a 1 inch block in the rear but the leaf pack bolt/pin runs through it out the top with a nut on it and my question is that factory and do I need to remove that block to in stall the new block with the kit thanks
Are the blocks on the rear leafs angled to relieve stress on the universal joints ?
I see all this RC lift kits whether they are 3",6" or whatever with no body lift on 01-10 2500HD and every truck looks a different height. I know you can crank on the keys. Yours for instance looks almost like a 6" or at least taller than a 3". Did yiou crank the keys all the up?
is a 4” a noticeable difference from stock leveling kit? my buddies are all suggesting 6-9” lift kits but i really don’t wanna deal with much cutting and modifications. I see a nice cognito 4” lift that comes with everything but they insist 4” will be like nothing happened
Maybe one of you can help me..
If you put a 3 inch lift kit in a 1500 and a 3 inch lift kit in a 2500, would the trucks come out to the same hight in the end, or will the 2500 still be higher.
@@MrPang278 if the 2500hd is higher when stock, then it will be higher with a lift as well.
Would you rather the 3 in rough country over the kryptonite leveling kit that’s can get you 2 in
Looking for a small lift for my 2015 3500 crew cab Duramax.
If you already have a leveling kit installed is it necessary to install the ones in the kit??
What did you use to cut the torsion key??
Can you fit 33’s with stock bumper and not rub?
Yes but they can’t be 12.50 wides
I have 34s on 11 wide with a bit of rubbing the plastic liner stock bumper, I did cut just a little bit but most people wouldn't notice
Could not find any information on 2019 L5P drop in fuel filter kits. Have you used any of the Fass, VSE or Fleece systems. Or do you plan on doing comparisons on these? Tha k you.
I and several of my trucker friends run the Fass system. They work well to protect your injectors
Quick question for ya. My Milwaukee impact stopped working. Lot of people say it’s the certain model that is prone to stop working. What model number do you have? I see you always using it and I only used mine maybe 10-15 times
Nice video brother short and on point.
I have installed this exact kit to my 2009 truck but it is little stiff on the front specially in rough roads.
Have you faced the same issue?
Bro I just installed mine it rides bad I'm not happy at all with it
@@chrishernandez9720 what option of shocks did you go with the m1 the v2 or the premium
Tire size?
33/12.5r22
Iam buying that rig
That rust!
Ey . $ munch. for lift kit suspención for. Chevy Tahoe 97 . Including. Work