PWC Anchor kit for your JET SKI

The JET TECH Safeguard anchor has been specifically designed for safe and easy use on all jet skis. The Jet Tech sand anchor was developed in Australian coastal conditions to offer supreme anchoring reliability in all conditions. In true JET TECH innovation style, we hot dip our galvanised metal anchor in commercial-grade vinyl rubber to prevent chips and scratches to your jet ski, boat and boards. The water and abrasion proof chain sock also provides more protection covering the entire length of the proper marine gal chain which is required to provide the correct weight and approach angle for anchor setting. Hold fast after you’ve gone fast!
DEEP DIVE
1.5kg galvanised steel anchor
Protective thick rubber vinyl coat
10m or 20m double braided red line
2m or 4m X 6mm chain with protective chain sock
Bright orange rope float
Stainless steel snap hook
Heavy duty storage bag with two drain holes.
The difference between the heavy duty and light duty kits, is the chain and line lengths, heavy duty is carrying twice as much chain and line, giving you more hold in deeper and rougher conditions.

[@spacklerat3214]

Hey bud, I bought a 1.75 lbs fluke style PWC anchor it is very, very similar to yours. What weight is the jet tech anchor you are describing because my 1.75lb anchor seems to be too lite to grab into the sand/ muck bottoms here in my area. Thank you!

[@jonasangsvall]

Would gladly buy, if a shipping method that is affordable would be possible to Sweden? The shipping cost alone is more than the product cost. Any advice?

[@Lil_Waikz]

first comment yay

[@Buddy_the_brilliant]

Does the offshore work with inshore as well

[@JetTechProducts]

Hey Buddy, you can definitely use the offshore anchor inshore - the only difference is the length of chain and rope supplied. So if using the Offshore as an inshore anchor you just wouldn't need to let out as much line. Hope this helps!