I absolutely love your content. I’m a guy who paints in my garage and you have helped me a ton. Much appreciated and thank you for sharing your knowledge
Marco has a gift from the heavens above. Anything he touches turns to gold. First video I ever seen of the man was painting dodge caravan bumpers at an outside auction in 20° with 25mph winds with factory results & zero over spray . Best of the best with personality and pizzaz...
Idk how he does it. My paint trying in sub 50 deg wouldn’t come out of the damm gun with fast red. I just stopped painting unless it was spring/summer.
Nice work, I have a JFEGWO 6000A and I must say it's an outstanding product. The build quality is impressive, and it effortlessly started my 2.5-liter diesel pickup truck on a freezing morning.
Very impressive Marco! The blending was top notch, wet coat gotta stay wet! I’ve tried those paper condoms, 6 kids later, I wouldn’t recommend it😂, and yes they are all by the same woman! Keep up the great work.🤘
I've got some SMR 1150 and fast activator to use up, but I think next time I'll give the 135 a try. My insulated and plastic lined paint area is generally 55 to 60 degrees with the 220 shop heater going and snow outside. Still in that range I need a faster clear.
Nice results marco.... but i want to see this clear in cold weather ...and preheatet in hot water bath and see the results using your inflatable booth... like to see diy results that exceeed the high need spray booth.
Great job brother.... using that color blender with a little base coat to help blend was a great idea. I wonder if adding just a little bit of flattening agent to knock a little shine off the new clear would help match the old stuff.....as always nice work !! 🇺🇲🇺🇲
Love ya work mate, been learning alot watching your videos, im a backyarder but i see my results getting better over the last dozen jobs, thank you for all the tips and showing how you can learn from the fuck ups aswell, cheers from aus 🇦🇺
Is it just me or are you and Brian from paint society playing off of eachother for video ideas. I think it was the similar titles for the diy videos. Loving the content for you both!
Learning something new everyday. How long did you wait sir after you spray the color blender? I am in the process of repainting my whole car and thinking about using the speedokote bright white basecoat with mid coat (mixed dry pearl powder and intercoat clear binder) to prevent using stage 1 white pearl paint. I am also debating on which clearcoat i should use with this project. Would love to get suggestions from you. Thank you in advance!
I have a question!! Please help me out! How do I go about getting into this field of work??!?! I'm an aspiring painter and body man. 28 years young. I've sanded a bumper or two here and there and spray can painted here and there on my 01 mustang and 01 harley f150. I just entered into the automotive hobbyist stuff and car scene in the past couple years but specifically got interested in the paint/body side for about 2 years now. I watch videos like yours and many others on youtube. All the time. I picked up a 29 gallon fortress compressor and an R500 LVLP gun last year, a US general tool box, and a Quinn 350+ tool kit. I'm still in the process of buying things as I work a full time job as a security guard at the moment. I'm in small town southern WV. Super limited in autobody and paint shops around and when they do hire they always require experience and I never get a call. Should I just keep trying to get my foot in the door somewhere? Should I just jump right in and start working on my car and truck at home practicing? I do have a 2 car garage currently and I can make it work.
Awesome job as always bro. My name is Marco too lol. I have a 1990 Mustang GT that doesn't need any body work but I wanted to paint it the same color as it is now to freshen it up. I live in Jersey and was wondering if you would paint it if I trailered it to you and how much you would charge? I would completely strip it down before bringing it (quarter windows, lights, handles, locks etc). The factory paint is faded that's all. Thanks
@speedokote hey what’s ratio for the spray gun since it’s bigger if ur useing rest oleum paint and what does the harder due and sprayer machine I refer to is the cheap one and vevor turbine for 40$
For questions regarding speedokote stuff can call the speedokote number For general questions regarding painting I offer a 15 minute duo call for 30$ which you can literally ask me anything
A serious question...I don't see you using your inflatable spray booth anymore why?... Are they worth the money... do they perform and give you cleaner ..paint jobs time and time again... or are they like the paper condom ...joy for 5 min or lifetime pain later...ie 6 kids later.
You need to place 30" extraction fan that sits on a riser and velcro plastic or fabric shroud to the booth... Get some 6mill poly, make flexible exhaust shoot, ( just cut 15 foot sheet of poly and seam the joint with tuck tape.. afix the plastic sleeve you just made with a ratch strap to the fan...and bammmmmm), and pump it out the shop door.
@@jumpinjojo thanks for saving the day mate, we all need to understand the importance of car spelling when it comes to painting a car. I haven't said this before, but before I paint, I run in circles and sing my abc's just to insure a crispy job VERY IMPORTANT 😇
❤❤love that red TA Marko, also I can see 👀 the arms getting healthy lol, are u eating the Cry Baby's?? 1 Cry Baby 👶 has to be worth a least 500 to 1 gram of Protein!!! LMAO 🤣 🤣 🤣, another kill video, Well-done Sir !! Jason B, Wichita, ks 😮😊
@speedokoterefinishnetwork4937 yes ,when I was lifting at least 1 gram per.1 pound body weight. Food n protein bars n quality shakes, cheap stuff on the shakes alot of number 2 Water popp lol 😆 only 50 to 60 grams at a time.,I believe the body can only Absorb so much protein at a time. More than of that you just wasted or peed it out
I absolutely love your content. I’m a guy who paints in my garage and you have helped me a ton. Much appreciated and thank you for sharing your knowledge
Hey man glad to hear!
Marco has a gift from the heavens above. Anything he touches turns to gold. First video I ever seen of the man was painting dodge caravan bumpers at an outside auction in 20° with 25mph winds with factory results & zero over spray . Best of the best with personality and pizzaz...
Settle down its just paint.
Much appreciated
Idk how he does it. My paint trying in sub 50 deg wouldn’t come out of the damm gun with fast red. I just stopped painting unless it was spring/summer.
@@jecrpalier I'm an expert in painting in the worst conditions. I make it happen
@@speedokoterefinishnetwork4937tutorial in removing and replacing badges without breaking them? .. and placing stickers??
Nice work, I have a JFEGWO 6000A and I must say it's an outstanding product. The build quality is impressive, and it effortlessly started my 2.5-liter diesel pickup truck on a freezing morning.
Nice!
Nice work, i am a perfectionist but love the fact you look past the minor flaws and call a job done. More people could use your attitude good on you
We all gota sleep at night some of these guys don't sleep.
@speedokoterefinishnetwork4937 keep up with the good content brother, you are doing a great job
@@rickyricardo6457 appreciate it
Fantastic job brother! Great touch clearcoating those lights also 👌
Good finishing touch!
Very impressive Marco! The blending was top notch, wet coat gotta stay wet! I’ve tried those paper condoms, 6 kids later, I wouldn’t recommend it😂, and yes they are all by the same woman! Keep up the great work.🤘
LMAO 🤣🤣🤣🤣
Should have used Saran Wrap with a rubber band,lol.
@@deliveryguyrx 🤣🤣🤣
Awesome video Marco, you did a great job on this one with a good colour match and the clear went on really nice👌👍John UK
Thanks man!
I've got some SMR 1150 and fast activator to use up, but I think next time I'll give the 135 a try. My insulated and plastic lined paint area is generally 55 to 60 degrees with the 220 shop heater going and snow outside. Still in that range I need a faster clear.
Smr1150 dries stupid fast. This stuff is a hair slower but higher solids
Great job! Just got my speedokote products and will record my first project soon
Great ! Excited to see
Nice results marco.... but i want to see this clear in cold weather ...and preheatet in hot water bath and see the results using your inflatable booth... like to see diy results that exceeed the high need spray booth.
I definitely need to try heating clears up in the winter!!!! Your right my guy!
Sheesh! Looks wayyy nicer than who it’s for! (Assuming that’s for dealer)
You’re too nice!
😎😎😎😎😎😎 thanks man!
Nice touch on doing the headlights!
Would you do another video on refinishing a set of nasty, not just fade lenses?
Thanks
Ron
Sure!
Now not faded but really nasty.
That was quick
Thanks
You nailed this one!
For super cold weather no booth, for sure a nail
10:32 this is true on the consumer side, and they expect you to except that after you spent a month in a clean new rental.
Pretty much 😞
Great job brother.... using that color blender with a little base coat to help blend was a great idea. I wonder if adding just a little bit of flattening agent to knock a little shine off the new clear would help match the old stuff.....as always nice work !! 🇺🇲🇺🇲
It's a good little trick!
I only use speed products. I get the best results every time.
I've been using smr130 sence I was a teenage. It's top dog
Look like glass. From what i have noticed wet bed can darken your pannel. Its like looking in the deep end of a swimming pool, it will be darker
I'm sure with a little buffing, the surrounding panles should match. Not perfect but close
@@speedokoterefinishnetwork4937 looks damn good to me
Love ya work mate, been learning alot watching your videos, im a backyarder but i see my results getting better over the last dozen jobs, thank you for all the tips and showing how you can learn from the fuck ups aswell, cheers from aus 🇦🇺
Thanks!!
Looks good to me!😊
We try!
I think you should do a 10-min video doing your imitations of the nerds and warriors.
Yes 🤣🤣🤣
Don't forget the DORKS to 🤣🤣🤣🤣
I like the raspberries at the end!
Is it just me or are you and Brian from paint society playing off of eachother for video ideas. I think it was the similar titles for the diy videos. Loving the content for you both!
We are friends, we do talk 😂😂
Learning something new everyday. How long did you wait sir after you spray the color blender? I am in the process of repainting my whole car and thinking about using the speedokote bright white basecoat with mid coat (mixed dry pearl powder and intercoat clear binder) to prevent using stage 1 white pearl paint. I am also debating on which clearcoat i should use with this project. Would love to get suggestions from you. Thank you in advance!
Wait 30 min for blender to dry. Best clear is smr42 if your in Warner climate 50+
I have a question!! Please help me out! How do I go about getting into this field of work??!?! I'm an aspiring painter and body man. 28 years young. I've sanded a bumper or two here and there and spray can painted here and there on my 01 mustang and 01 harley f150. I just entered into the automotive hobbyist stuff and car scene in the past couple years but specifically got interested in the paint/body side for about 2 years now. I watch videos like yours and many others on youtube. All the time. I picked up a 29 gallon fortress compressor and an R500 LVLP gun last year, a US general tool box, and a Quinn 350+ tool kit. I'm still in the process of buying things as I work a full time job as a security guard at the moment. I'm in small town southern WV. Super limited in autobody and paint shops around and when they do hire they always require experience and I never get a call. Should I just keep trying to get my foot in the door somewhere? Should I just jump right in and start working on my car and truck at home practicing? I do have a 2 car garage currently and I can make it work.
Start practice more at home until you feel comfortable to do other people's stuff
Nice!!! Seriously spraying in these temps and no spray booth... looks like glass 😎 You sure about that 🤣🤣🤣🤣
It ain't easy!!!! 🤣🤣🤣
Looks great! Is the JFEGWO 6000A jump starter in the video reliable? I was just thinking of buying one.
For the 70-110$ mark good
If you want the best get gooloo 4600gt
I get about 30 jump starts on one charge
Awesome job as always bro. My name is Marco too lol. I have a 1990 Mustang GT that doesn't need any body work but I wanted to paint it the same color as it is now to freshen it up. I live in Jersey and was wondering if you would paint it if I trailered it to you and how much you would charge? I would completely strip it down before bringing it (quarter windows, lights, handles, locks etc). The factory paint is faded that's all. Thanks
We charge 20 for an estimate which can be paid cash app and you can email me some pics for a preliminary estimate 🙂🙂
@@speedokoterefinishnetwork4937 ok sounds good. I’ll send pics now
Nice job my man under the mirror nice and wet customer will love it. 🫡💪🏽
I definitely pushed the gas a little on this one got it real good imo
@@speedokoterefinishnetwork4937 yea it does look good. Glossed up and glassed out.
I am with you on the paper over plastic 😂
*invents paper condom*
🤣
Nice job.
Thanks!
Enjoyed video thanks
Thanks!
It is called the swimming pool effect.
Yes!
@speedokote hey what’s ratio for the spray gun since it’s bigger if ur useing rest oleum paint and what does the harder due and sprayer machine I refer to is the cheap one and vevor turbine for 40$
I don't spray Rustoleum on cars and if I ever do it's just the spray can stuff
@@speedokoterefinishnetwork4937 what’s ratio for paints u use for those paint guns
I’m I right on one of ur vid where u painted truck yellow was it 1 gallon of paint and pint of reducer
@@jameselloko6365 1 gallon paint, quart of hardener, about 16 oz reducer
I just tryed smr 1100 and smr 260
Smr1100 is a little tricky and dries slow, but some of my best paint jobs with it if you get it just right
Do you have an email for actual paint questions and products?
For questions regarding speedokote stuff can call the speedokote number
For general questions regarding painting I offer a 15 minute duo call for 30$ which you can literally ask me anything
A serious question...I don't see you using your inflatable spray booth anymore why?...
Are they worth the money... do they perform and give you cleaner ..paint jobs time and time again... or are they like the paper condom ...joy for 5 min or lifetime pain later...ie 6 kids later.
There nice but not healthy to spray in on a consistent basis as they don't vent fumes out as well as a real booth.
You need to place 30" extraction fan that sits on a riser and velcro plastic or fabric shroud to the booth... Get some 6mill poly, make flexible exhaust shoot, ( just cut 15 foot sheet of poly and seam the joint with tuck tape.. afix the plastic sleeve you just made with a ratch strap to the fan...and bammmmmm), and pump it out the shop door.
@@772777777777777 yup iv seen this!!!!
blend puzzues, you order dam paint from same company supplied manufacter. I want same brand and type same shiat off assembly line
Oh ok
@@speedokoterefinishnetwork4937 do you know how get ppg aircraft paint used 2000-2004 nissan frontiers?
Better then factory
Probably more shiny 🤣
Your work is amazing
@@michaelmason5136 I appreciate it! Do the best I can given the conditions
*Than.
@@jumpinjojo thanks for saving the day mate, we all need to understand the importance of car spelling when it comes to painting a car. I haven't said this before, but before I paint, I run in circles and sing my abc's just to insure a crispy job VERY IMPORTANT 😇
❤❤love that red TA Marko, also I can see 👀 the arms getting healthy lol, are u eating the Cry Baby's?? 1 Cry Baby 👶 has to be worth a least 500 to 1 gram of Protein!!! LMAO 🤣 🤣 🤣, another kill video, Well-done Sir !! Jason B, Wichita, ks 😮😊
More protien, less stress, gluten free 6-7 days a week. Geting there! 😂😂🙂
@speedokoterefinishnetwork4937 yes ,when I was lifting at least 1 gram per.1 pound body weight. Food n protein bars n quality shakes, cheap stuff on the shakes alot of number 2 Water popp lol 😆 only 50 to 60 grams at a time.,I believe the body can only Absorb so much protein at a time. More than of that you just wasted or peed it out
Food protein, takes longer for the body to break down, I my opinion. Lol ♻️ 😆
@@JasonBackes absolutely
@@JasonBackes why did you stop
💰 💰💰💰💰💰💰
😎😎😎
Another great vid. Thanks.
Absolutely man!