Shaved Sportster cam cover - EP 2 Unnecessary sh
Вставка
- Опубліковано 6 сер 2024
- How to video. shaving down a cam cover on 2004 and up Sportsters. In this video I'm shaving down an alloy cam cover on my 2015 Harley Davidson Sportster 72
- Авто та транспорт
Nice work mate! Life hack: I use a piece of folded aluminum foil under the oil filter covering the primary so any and all oil that comes out of the filter or engine goes directly into the drain pan.
I have shaved a few chromes ones without messing up the chrome. Duct tape the chrome side really well and use a diamond tooth saw. Works pretty well. And with that said I have also trimmed a few and the chrome chipped a bit.
Yours turned out nice. On the polishing. I hit em first with 800 grit. Then 1500 then 3k wet. Then finish polish like you did. It takes a lot of the finish polish time and looks just as good as chrome
Straight to work..not this or that bullshit like other orators giving speeches about harley heritage or website nonsense.....😂😂😂nice n quick work...
Looks so much better!
Thanks Tom 🤙
Hacksaw and file by hand is the way to do the chrome ones.
Sure makes the Cam Cover/Transmission area look smaller. Too bad this turns into an Oil Change if you do it as Synth Oil is pretty dear these days. Definitely a good look.
That’s Cool 😎 been thinking about it myself!
Was the one thing I never liked the look of on a sportster engine. In my opinion it just looked cheap. Shaving down the cam cover gives it more of an old school style 👍
Nice! ... I did some unnecessary sh#t on my bike this weekend but it didn't come out as good as what you did lol
Hahaha nice one man 🤙
Clap 👏👏👏 👍👍👍
Love your work,I'm afraid I'm not confident enough to tackle some of the work you do but I did manage to install an external breather similar to what you had on your Street Bob with a slight variation,I didn't buy the DK customs catch can and have just stuck to the brake fluid reservoir does the job,the DK customs catch can while great was a bit pricey for me on a limited budget anyway keep up the good work.
Thanks mate. To be honest I wouldn't recommend the DK customs catch can anyway. Mine started to badly rust on the inside after only 1000kms.
@@TheGingybeardMan Wow that's not great I was nearly going to pull the trigger on one but the brake reservoir is working really well so I thought I can get away with what you first used,note to self I forgot to drill a couple of vent holes in it rode around the block and the dipstick on my fatboy soon let me know when it shot out a hit me in the leg, fortunately no permanent damage to me or the bike.
You got this ALF. if me and gingy can work on harleys, TRUST US,so can you! GL Mate
Great work brother.
SPORTSTER4LIFE
Cheers mate 🍻
@@TheGingybeardMan cheers👊 God is bless you and your journeys on the Sportys.
@@TheGingybeardMan do you by chance know where I can get a decent sporty tank that is more than a 1.9 lol and have you ever Seen a sporty gas tank bra? My dad put a dent in my tank, I'd like to cover it with a black bra, but NO ONE MAKES A 1.9 gallon friggin tank bra , it's too small. Harley I love you, but dude, why a 1.9 on a 20 sporty, all the other ones I saw have a 2.3 and I guess that's what I get for not actually thinking about that when I drove off. Lol. N e ways. I'm a SPORTSTER4LIFE, but haven't found a good tank yet. I got a 76' AMF red white blue throwback paint, cool, I love it, but I need a bigger tank. 100 miles per fill isn't cutting it... any ideas Gingy??! Do you watch Red Rider from Canada?! She and her dad are cool too
@@irishguyjg_2ndchancerecovery Mate I've bought second hand tanks off ebay and never had any issues. Otherwise I'd recommend looking on the TC bros website, as they sell loads of tanks. Here's a link www.tcbroschoppers.com/collections/gas-tanks/products/efi-tank-for-sportsters-3-3-gal-with-screw-in-cap-bung
My sportster has a 3.3 gal tank off a sportster iron 883. The stock 2.1 gal tank was still too small for my bike. I was forever filling it up.
@@TheGingybeardMan thanks TGM. same issue here
Nice work bro
Thanks brother 🙌
Looks heaps better than the stock one man.
Thanks mate 🙌 I'm stoked with how it turned out.
No doubt about ya m8👌😂
Another solid video mate. Recently brought an 883, cracker bikes.
How's the house build coming a long?
Thanks mate. nice one, sportys are so much fun to rip around on. House is getting there, most all the brick work is done, will have to do an update vid on the house soon 👍
Did you have to remove the rockers to take the cam cover off? Also, did you chop the sprocket cover too?
No mate there's no need to remove the rockers. I ended up going with a different sprocket cover which I did another vid on.
No reason this couldn't be done on 03 and earlier models right? Also, how did you pull the cover off without the cams coming out with it? Is there a trick to that?
Yep this can be done on other sportster models as long as the cam cover is not chrome plated. There was no trick used to keep the cams in place.
So what do you do with the hole on the bottom towards the front?? I think it’s lined up in the cover w/the #4 cam front exhaust. Does Oil drip out of that hole in the cover or is that a breather hole or something thats cast in the cover?? I’ve seen vids where people Tig weld that hole up. Why? What’s it for. Does it affect anything cutting cover down & leaving hole on bottom of cover unplugged and open?
Ive read your comment several times and don't know what hole you're referring to. All of the holes on the cam cover have a mounting bolt go into them. The hole in the rear of the cam cover is for the oil feed line. If you watch the whole video you will see all the holes are accounted for by either an oil line or bolt.
@@TheGingybeardMan Thanks. My bike is a 1994 1200 Evo Sporty and when you cut,shave down the cover etc you end up w/a hole on the bottom that'll leak oil. I ended up tapping and plugging the hole w/a little Allen screw. Tatro Machine has a vid of him Tig welding up the hole on a bike. I have a Tig welder but cant Tig 4 shit, so just tapped and plugged the hole.
@@tonyencalade4502 ahhh that must be the difference. Harley must have changed the cam covers from your 1994 sporty to my 2015 sporty
@@tonyencalade4502 i’m pretty sure the hole you are talking about was plugged on the piece that you cut off. It is a cross drill for an oil feed circuit. I have tapped and plugged them with a set screw.
Do you not need to put the engine in top dead center to remove the cam cover ???
No sir, removing the cam cover didn't disturb the cams
looks schmick mate
Thanks mate, appreciate it.
𝚙𝚛𝚘𝚖𝚘𝚜𝚖 🤤