Alphacool Apex Stealth Custom Hardloop Build (w/ timelapse)
Вставка
- Опубліковано 1 чер 2024
- As well as hardware reviews we like to do featured builds at KitGuru every once in a while on the channel. A company that we have not featured on the channel for a while is Alphacool so we thought this featured video would be a good opportunity to build a fully custom water-cooled Alphacool system to check out what’s on offer from Alphacool in 2024. Read more here: bit.ly/3IDPJ8o
00:00 Start
01:33 Apex Stealth Metal Fans
04:40 Alphacool hardware
08:28 Other Hardware in the system
10:30 Timelapse build
18:50 Build is complete!
20:31 James' thoughts on the build
Apex Stealth Fans Price and availability:
Available in 120mm versions in Black, White, Chrome and Gold colours.
Price - £26.99 each from OcUK (OCUK Dropped price to £21.95 after filming video)
Fan Features:
• With Apex stealth the entire fan is completely decoupled from the full metal frame.
• Fan impeller features a closed frame design and blades optimised for maximum airflow and high pressure.
• Apex stealth fans are equipped with a 6-pole motor with a PWM Speed range of 400 - 2000 RPM, a zero RPM mode and up to 3000 RPM as a power fan variant.
• Speed - 400-2000RPM (3000RPM Power fan variant)
• Airflow - 47 CFM
• Pressure - 2.09 mmH2O
• Bearing - Hydro Dynamic Bearing
• Connection - 4-pin PWM
• Noise level - 24.6 dBA
APEX Stealth Specifications
Dimensions (L x W x H): 120 x 120 x 25mm
Material (Frame): Die-cast zinc,
Material (Impeller): Plastic
Weight: 320g
Speed: 400~2000±10% rpm
Bearing: Hydro Dynamic Bearing
Connection: 4-Pin PWM
Cable length PWM: 40±8 mm (+ 50cm extension cable)
Cable length (daisy chain): 110±10 mm
Start-up Voltage: 6V DC
Rated Volt: 12V DC
Power Consumption: 2.64 Watt
Air Flow: 47 CFM
Static Air Pressure: 2.09mmH2O
Noise Level: 24.6dBA
MTBF: 100,000h
PWM control: Yes
Zero RPM control: Yes
Tacho Signal: Yes
Auto-restart: Yes
Test System Specification
• CPU: AMD Ryzen 9 7950X bit.ly/3x0MchN
• Motherboard: Gigabyte X670E Aorus Master
• Memory: 64GB (2 x 32GB Modules) GSKILL Trident Z5 DDR5-6400
• Graphics card: Sapphire RX 7900XTX Nitro+ bit.ly/3T6OtQ4
• Storage: 1TB Corsair MP700 PCIe Gen5 NVMe M.2 SSD bit.ly/3IU6Lzv
• Power Supply: Silverstone Decathlon Series DA-1000R Gold
• Chassis: Lian Li O11D EVO RGB bit.ly/48TB2ZI
• Thermal Compound: Arctic MX-6 bit.ly/3IxHMBN
• Operating System: Windows 11 Version 22H2
Alphacool Cooling System Specification:
Fans: 7 x Alphacool Apex Stealth Metal Power fan 3000rpm matte black (120x120x25mm) bit.ly/4caulVT
Distro Plate: Alphacool Core Distro Plate O11 Dynamic Evo/XL with Apex VPP pump bit.ly/4cdb9GT
CPU Block: Alphacool Core 1 Aurora Silver bit.ly/4acoEoO
GPU Block: Alphacool Eisblock Aurora Acrylic RX 7900XTX/XT Nitro with backplate bit.ly/3Pii8Vt
Radiators: 2 x Alphacool NexXxoS XT45 Full Copper 360mm Radiator bit.ly/4ccwYq6
Tubing: Alphacool Ice Tube 16/13mm Acrylic (PMMA) HardTube Satin 80cm - Set of 4 bit.ly/3Pl7QDP
Compression Fittings: Alphacool Eiszapfen PRO 16mm HardTube fitting G1/4 - deep black 6 pack bit.ly/43iNe58
Rotary Offsets: Alphacool Eiszapfen 16mm off set fitting rotatable G1/4 OT to G1/4 IT - black bit.ly/3uXf2zi
90° Angles: Alphacool HF L-connector G1/4 outer thread rotatable to G1/4 inner thread - Deep Black bit.ly/4a1WVqQ
We never offer affiliate links or take percentages of product sales. If we say the product is good or bad we mean it. Our Editor in chief wrote about why you should value this and how the industry is rife with fake reviews from 'influencers' - read here bit.ly/3pXzaw4: bit.ly/2BopnF9
Buy our merch from here: kitgurutech.myspreadshop.co.uk
Discord invite link: / discord
Steam Community steamcommunity.com/groups/kit...
Be sure to support us on PATREON / kitgurutech and read our MANTRA on HONEST REVIEWS Here: bit.ly/2BopnF9
Visit our facebook page over here! / kitguru.net
Visit our Twitter page over here! kitgurupress?lang=en
#alphacool #apex #pcbuild #watercooling #customloop - Наука та технологія
thats some build - a system most of us can only dream about.
Loved the Timelapse. Very theurapteutic
Thanks for the comment 👍🏻
Yeah I’ve watched it a few times. Same.
I love straight line hard line done like this. Very beautiful colours too. Don’t see enough blue
Blue can be one of the nicest colours imo.
Brilliant work mr Dawson. Virtuoso 😮
Lovely build James. Very pretty !
Wow, such a beautiful build (as usual).
Classy build! Absolutely love it.
Thank you kindly!
@@KitGuruTechcould you let me know the cost of the components? I may have to copy this for a mate.
I love your builds James. Absolutely stunning job 🥰
Beautiful. Convinced me to get the alphacool distro plate 240. Waiting on parts now
Great job James
Thanks!
love the build James, its so clean, and all the straight lines look so neat and 'industrial'. Hard line tubing is so much nicer than soft tubing. its just above my level sadly. wish you cuold make a guide on how to build a system like this for us not so experienced users.
Its quite a easy with a distro plate, less bends are needed.
Spectacular. I forgot about alphacool. You guys tend to focus more on Ekwb.
Glad you liked the build
Great build, love it.
Amazing guys love it
Very impressive James. Very very clean lines
Many thanks!
Holy crap that’s amazing James ❤❤
Thanks!
Looks great 👍
Thank you! Cheers!
Looking good!
Thanks!
That’s a work of art. Love the use of Amd in this one too. Far too many builds using intel. Nice to get variance.
Oooh very nice!
I had my alphacool rads just waiting for me to put them in once my pump/res arrives. Good to see how they work/look before hand.
Awesome what hardware spec is the system going to be ?
I'm transferring a z790 mobo with a 13600k and 3080 rog strix to the case. First time making it a custom loop though.@@thetechdevil-jn1vo
Acool aren’t sending the flush mount stop fittings anymore? That’s a shame. Nice and (seemingly) easy build, James. Good one.
Thank you
When GPU prices started to fall, I took a deal on 6900XT Waterforce. Then started to think how I would get it to work the most easiest way.
I bought Alphacool 360 Eisbaer Aurora from Aquatuning's B-stock, removed the jet plate to maximise throughput. And was happy.
Later, I wanted to put CPU also to watercooling...
Well, I got the same Eisbaer, from same place and B-stock, but 480 size this time. I just bought an extension cable (or tubing, to be exact) set and that was it. Do that on any other AIO...
Anyway, I just bought Alphacool 200mm reservoir and Apex Vpp-combo, core 1 CPU block and core AM5 performance kit.
And replaced the cpu block/reservoir combo(s).
Works a treat. Good stuff!
Great story. How’s your temps under load ?
@@stickyfingers9710 Well, I happened to check out temps on playing Alan Wake 2 last weekend: GPU 48, Hotspot 68 and CPU 55,8. Celsius, of course ;) That's with GPU at 2600 core and 1200mV. I run my 7800x3d with -30 curve optimizer on all cores, maybe I was lucky on silicon lottery, but I have not been able to get any errors, for example in OCCP's stress tests...
I mean, temps are just excellent. And so far, I'm really, really impressed with VPP Apex-pump...
That’s impressive. Certainly worth doing especially with lower noise levels too.
@@theonlyredspecial Exactly, lower noise level is the main thing. And knowing, that everything is serviceable and replaceable.
When you building it ? Are all the parts available ? Had problems getting some alphacool parts before
Looks great, does it have the performance to match? Would like it in a deep emerald green or a nice warm red/orange for winter…
Nice build! What coolant is that?
Wish they would do a fan with a metal impeller too!
Wish the stealth fans were a bit cheaper, looking forward to the rgb versions as well
Very nice. Bending all those tubes must have been a nightmare. Always end up getting burnt fingertips from that work plus the smell of cooking plastic becomes your best friend. Well worth the effort though that's a fantastic build.
Hopefully they put this one up for a competition!
Thanks appreciate the comments !
Looked great. Love the lines
Burnt fingertips are a part of the job
dream
Really like that bistro (bistro?) plate bit of a work of art that. Sort of reminds me of the valve body of an automatic transmission.
Distro 😀
Bistro 😂
😂
imagine this build in white evo, chrome fans and white gigabyte pro x soo good
Stunning agree.
Ok well that’s me getting told off by the wife for pricing parts 😂
Nice build. Have the same gpu and block but my memory temps are very high (80 degrees under load). All the other temps are amazing.
I always was told alphacool were the cheap Ekwb. But that build looks brilliant
What cpu are you using swizzler ?
@@Everychillitsjustlife-cz8zz7900x
thanks for sharing, Can you share temps and benchmarks?
Very interested to see how that water cooling is performing.
GPU temp after 30 mins of 3DMark SpeedWay stress test was 49C
@@KitGuruTech thanks
Omg i love the irish accent.
Irish ? 😂
I'm curious about your flow configuration - and why you have your gpu flow (hot) dumping directly into your cpu (also hot). Wouldn't it make more sense to have radiators between the hot components? For example:
pump-discharge
gpu
radiator
distro-plate
cpu
radiator
distro-plate
pump-discharge
This is just how the distro plate ports are laid out, they are labelled in the manual RAD, GPU, CPU RAD etc. For a gaming pc it makes sense to me to have the GPU first in the line anyway, you want your GPU to be cooler for maximum performance right?, plus the difference in water temperature between the GPU inlet and outlet will be minor.
Also CPUs just dont benefit as much from custom loop cooling these days, the CPU IHS is the limitation now.
👍@@KitGuruTech Thanks for the response! The build looks amazing btw... If you had more time for this build - what would be your mounting plan for the flow indicator? Or did it simply not fit?
When I saw the “stealth” wording I initially thought it was a rear connector motherboard build. I’m waiting for the ASUS motherboards and 5000 series gpu’s with the BTF connection for my next custom loop I think.
Sounds like a good time to do it. Will you buy alphacool or Ekwb kit ?
@@Itsameamario-ns3se I’ve used both and tend to mix them in my builds. I can never get all EK parts as they never have stock and their white rads don’t match the white cases I’ve used so far.
I think Ekwb makes nicer parts but this is a lovely build. How much is all the cooling gear in this system ?
Several grand for the cooling alone
GPU manufacturers should have a standard connector to allow the use of water cooling on their heatsinks or sell "naked" cards to allow you to use your own water cooler.
wishful thinking !
Wouldn’t work
They'd charge a premium for a naked card 😂
I love the fans and considering what they're made from I don't think they're over-priced. Alphacool are killing it right now with pretty much everything. I've gone from hating the look of their gear to loving more than any other manufacturer.
I feel the same way. I was the biggest EK fanboy forever but they have stagnated.
@@jonas000111 Thanks, nice to hear 🙂
I am going to go into the corner of the room and cry. My own system pales In comparison.
Looks good but I'll stick with my $25 air cooler
Great build, but if you were show casing Alphacool why not use the the curve maker? While you may not need it those of us who are not QUITE as adept would benefit . :-)
Is that for bending hard tubing ?
Nah just need your eyeballs and a square table
Ive never used a bending tool, always found it easier to do it by eye, or use the corner of a desk/worktop 😁
@@KitGuruTech we arent all at your level,. that tool sounds good to me !
Bet that is worth a pretty penny😅
Yes please, need a nice DAW, HOW MUCH?, ever thought of deliding for even better CPU cooling?
He did a whole delidding project with Ekwb here over 3 videos.
@@justindavis7600 missed those ones, need to look them out, was the result worth the effort?
Yeah I found those videos really good. I think James helped Ekwb set the whole delidding thing up with debareur
@@Maxverstappenracing-dz3pt DerBauer (The Builder) is the master of de-liding…
@@murraywebster1228 We originally approached EKWB last year with the idea of them doing a delidding project with us. It took some time to get the final kit in place - and yes Derbauer was involved in the project with us. Also we have a new video coming soon on delidding as well. so stay tuned for that one.
That distro plate does not line up with the tubbing.... looks terrible... parts are nice though
It's probably just the camera angle. It lines up perfectly.
nonsense and its 'tubing' not tubbing - its not a cooking channel.
@@KitGuruTechif that is the case I take back my comment 😊 but they do like a bit off
@@canarychrome7012glad you spotted my typo, just don’t know why you are being rude? Perhaps you are just a poor soul seeking your place or approval… sorry if my typo offended you
Are your eyes painted on?
i like other Alphacool products, but man they really damaged their rep with that fan debacle.
Want!!!!!!!!!!!! Seriously, I have a first born son and/or a kidney! Let's make a deal!
😀
Every distro plate build looks the same, there is zero variability between them.
What a profoundly illogical statement! 😮
Basically the Alphacool fans *could* be total crap but we don't care as long as they look pretty 😟🤦♂️
If this is the best commentary you can manage then don't bother saying anything.
That pretty sums up everything in the modern world!
This is a build. Not a fan review. We explained that at the very start. And we thought it was time to create a build again as we haven’t done any in recent months. If you want a review of the fans we may fit that In in the coming months.