How to Replace Front Brake Caliper 1998-2010 Volkswagen Beetle

Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ic/1ABC...
This video shows you how to a rear brake caliper on your 1998-2010 Volkswagen Beetle. A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle.
This process should be similar on the following vehicles:
1998 Volkswagen Beetle
1999 Volkswagen Beetle
2000 Volkswagen Beetle
2001 Volkswagen Beetle
2002 Volkswagen Beetle
2003 Volkswagen Beetle
2004 Volkswagen Beetle
2005 Volkswagen Beetle
2006 Volkswagen Beetle
2007 Volkswagen Beetle
2008 Volkswagen Beetle
2009 Volkswagen Beetle
2010 Volkswagen Beetle
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obg5/1A...
• 11mm Socket 1aau.to/obpQ/1A...
• 17mm Socket 1aau.to/obpQ/1A...
• Brake Caliper Hanger 1aau.to/oif/1AX...
• 1/2 Inch Impact Gun 1aau.to/or5/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obxi/1A...
• Torque Wrench 1aau.to/oaBd/1A...
• Brake Fluid
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oBv/1AX...
• Silicone Paste
• 7mm Hex Socket
• Drain Pan 1aau.to/oyq/1AX...
• Floor Jack 1aau.to/o2F/1AX...
• Jack Stands 1aau.to/oRE/1AX...
• Pick 1aau.to/oMK/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@jhershy1381]

See how all the fluid came out like a mess. Just remove banjo bolt first all the way into a catch pan and avoid some mess and empty the lines completely. Brake fluid absorbs water thru fittings and needs to be changed yearly is the recommended. Full replace the whole systems fluid since your doing new calipers