2018 Skoda Fabia window regulator replacement

Поділитися
Вставка
  • Опубліковано 25 лис 2024

КОМЕНТАРІ • 24

  • @pjcrowther
    @pjcrowther 58 хвилин тому

    Such a great video. Just changed the window regulator in my 2019 Fabia. Had a similar issue with the white clips holding the glass in and had to drill them out as my replacement regulator just latches onto the window.

  • @TriKAG
    @TriKAG Місяць тому +1

    Great video which explained the steps exactly. I replaced the regulator in my Dad's 2015 Fabia following this, it took a bit longer than expected as the white clips holding the glass in place were very tight. It took a bit of extra force using a rubber hammer to push out the small one and then the big one while my Dad held the glass and door to stop it bouncing. I didn't take the glass out as my Dad held it in place while I fitted the regulator in place so it helps if you have a second pair of hands. Thanks!

  • @gordonclendinning8637
    @gordonclendinning8637 3 місяці тому +1

    Excellent video, just did my first Fabia regulator of this type. All the little bits that make the job so much easier. Thanks

    • @kennedysgarage3281
      @kennedysgarage3281  3 місяці тому

      @@gordonclendinning8637 it is a pretty simple video but hopefully it will help someone out 🤞🤞

  • @tom_anderson
    @tom_anderson 4 місяці тому +1

    Perfect timing, just did one on my wife's 2018 Fabia this evening.

    • @kennedysgarage3281
      @kennedysgarage3281  3 місяці тому +1

      @@tom_anderson 😂😂😂😂
      Brilliant, I had this in my library with a while & just thought it might help someone. You just made me smile & Well done mate 💪💪

  • @EmmtKidd
    @EmmtKidd 22 дні тому +1

    I have to say thank you for this vodeo helped me so much new subscriber now thanks a mill

  • @Sebb002
    @Sebb002 Місяць тому +1

    Très utile, Merci beaucoup !

  • @philippe6743
    @philippe6743 2 місяці тому +1

    Thank you for your help !!!!

  • @lisihoxha7388
    @lisihoxha7388 3 місяці тому +1

    Thank very much for this Good video you help a lot

    • @kennedysgarage3281
      @kennedysgarage3281  3 місяці тому

      @@lisihoxha7388 it is a relatively easy job so you could most likely do it yourself 🤞🤞
      And thank you 🙏

  • @larrysimon1
    @larrysimon1 2 місяці тому +1

    Very helpful ................many thanks

    • @kennedysgarage3281
      @kennedysgarage3281  Місяць тому

      @@larrysimon1 thank you, hopefully it helped you out 🤞🤞

  • @carcareautoclimate
    @carcareautoclimate 4 місяці тому +1

    I'd always try to improve on them apart from repair before it came to me, replace any broken clips, Amazon has some good quality replacement parts or the local MSL dealer often has good sets. clean the door card. Sometimes it the small details that sets us apart.

    • @kennedysgarage3281
      @kennedysgarage3281  3 місяці тому

      @@carcareautoclimate good information. I generally find that garages that care are always busy, so well done mate 👏👏

  • @johnp6636
    @johnp6636 4 місяці тому +3

    Once the old regulator is out put both parts of the pins back into the glass fit the new regulator the simply push the glass down into the regulator i did it your way for years and found it fiddly

    • @tom_anderson
      @tom_anderson 4 місяці тому +1

      Good tip, the top of the plastic was sloped for them to snap in.

    • @kennedysgarage3281
      @kennedysgarage3281  3 місяці тому +2

      @@johnp6636 wow, I actually never knew that John. That is a bloody awesome lesson to learn.
      That is exactly why I love this forum for all us car repair guys. Fair play mate 💪💪💪💪

    • @EmmtKidd
      @EmmtKidd 22 дні тому +2

      Legend ... it clipped straight in

    • @kennedysgarage3281
      @kennedysgarage3281  8 днів тому

      @ 💪💪💪