I worked at a building supply company for 22 years and keyed locks there. I now key locks on the side. I ran across a couple of these today. It had me stumped. Now I know. Thanks for the help!
Hello, I'm a maintenance man in Portland Maine who is super interested in becoming a locksmith. I am trying to learn all I can and I want you to know that your videos are great. Just your lockpicking videos alone helped me a lot.
I wanted to replace deadbolt on door for years. Couldn't figure out how to remove deadbolt. I asked everyone and no one knew how. Will purchase new deadbolt tomorrow. Thanks for the info.
This video was a LIFE saver! I have an old home, so I am use to mortise locks and wild door locks! But, I was changing the locks for my work, it had me STUMPED! Thank you for this video!!!
I am stuck on the part where you use the Allen wrench to loosen the bolt up, seems like no matter how much I turn it is not allowing me to loosen anything. Help!!!!
I see this being useful for gates, where, with "normal" double-cylinder deadbolt (like a Schlage B662) could be defeated by just reaching between the bars and unscrewing.
Good to see how to take it apart, now I just need that wrench:) So, somebody changed the cylinders on this lock I have on my door, but now in the outside lock the key turns to a certain spot and then is gets stuck somewhere and cannot unlock the door. The interior side does not have a problem. Is that something I can fix myself?
Does anyone know how to remove the locks that have metal plugs where the screws should be? I can't figure out a non-destructive way to remove the plugs.
Need help! Trying to add a new remote door unlocking door thingy. Ive taken it apart but then ran into this thing. If u take it off and can put my device in as the circle u see is a bit to small and wont fit . Trying to send you a photo cant send photo. Ive taken it apart but that square box My door is apt metal door Is a bit too small to fit in. my new device Horbil door unlocker
I want to put a good security deadbolt and doorknob on my mothers frontdoor, but need one that is longer tban what they are making these days Yhe holes are set in farther i guess. I have found some, but would like to know if you can recommend one that you feel is a really good one.
@@24hrMrLocksmith Thankyou so much for responding to my question. From the edge of the door to center of doorknob or center of deadbolt key hole, it measures 4". When I had been looking for a security set I believe it was one with a 5 inch backset. I had purchased a normal sized set which was way too short even with the option of setting it longer.
Hi I was wondering the gold part that you pulled out with the key, is it possible that can fall out due to wear and tear? I’m asking because I came home and put my key in and unlocked my door and that piece came out of my lock with the key! I freaked out and thought I was burglarized but I was told by maintenance it could just happen and I don’t believe it.
i have this lock, and i need to replace it. But my deadbolt plate will not come of after removing the two screws? So i cant access the the 5/64th setscrews. I'm baffled. Any suggestions?
Hi Terry thanks so much for the excellent video (as all your videos are). Quick question: I’ve bought an old house that the previous owner at some point installed double cylinder Lori locks on all exterior doors. They’re a giant pain because if the deadbolt is locked and someone comes to that door you have to have a key to unlock it from the inside to let someone in. I want to convert it to a basic single cylinder lock with a simple knob in the inside for easy locking and unlocking without the key . Can I easily convert mine, and keep the same common house key? Or do I need to buy a whole new lock and get it rekeyed to the house keys?
my mailbox has like a piece of plastic jammed in it we’ve tried to get out with pliers but it won’t work also it’s a mailbox with others like how an apartment would be
The way you jiggle that key when it's deep inside that tight cylinder really gives me pause. Its always interesting to watch other gentlemen operate their equipment! Remember, always love your parents, dont run with sissors, drink milk, and brush your teeth. God bless
40+ yrs ago it was a great idea. A locksmith could take a Mortice cylinder in any keyway and install it into the Lori Deadbolt. Now we can use Commercial Grade deadbolts and swap out the key-in-knob cylinder.
We just bought our first house and we were wondering just how easy it would be, to replace the old deadbolt. Did NOT think it would be THIS easy!
I worked at a building supply company for 22 years and keyed locks there. I now key locks on the side. I ran across a couple of these today. It had me stumped. Now I know. Thanks for the help!
Thank you! I was at a standstill, but after watching your video, I was able to remove my old deadbolt!
Hello, I'm a maintenance man in Portland Maine who is super interested in becoming a locksmith. I am trying to learn all I can and I want you to know that your videos are great. Just your lockpicking videos alone helped me a lot.
Thanks
I wanted to replace deadbolt on door for years. Couldn't figure out how to remove deadbolt. I asked everyone and no one knew how. Will purchase new deadbolt tomorrow. Thanks for the info.
Thanks so much for this video, there was no way I would have got it off without it
Wow. that is a sneaky lock. Never would have guessed those Allen screws were holding it.
I've never dealt with these before but this is GOOD INFORMATION to put in my head for that one day that I DO run into one. Thank You!!
Thank you! Upgrading the locks in my older home. I would have never figured this one out on my own!
As a fellow locksmith, I find this lock used so much in my area. Cheap locks no doubt.
I prefer to use Schlage B660 and change the cylinder to match whatever keyway they need for the building.
This video was a LIFE saver! I have an old home, so I am use to mortise locks and wild door locks! But, I was changing the locks for my work, it had me STUMPED! Thank you for this video!!!
How does the rear of cylinder engage the deadbolt throw without a tailpiece ???
I get more calls for help with the Lori Double Cylinder locks than any other lock :-)
I am stuck on the part where you use the Allen wrench to loosen the bolt up, seems like no matter how much I turn it is not allowing me to loosen anything. Help!!!!
Thanks for the follow up video,what happens when the head is stripped or rusted do you drill it out?
Do you have video for lemaar square flat double cylinder deadbolt?
Thank you for the video.
I see this being useful for gates, where, with "normal" double-cylinder deadbolt (like a Schlage B662) could be defeated by just reaching between the bars and unscrewing.
Good to see how to take it apart, now I just need that wrench:)
So, somebody changed the cylinders on this lock I have on my door, but now in the outside lock the key turns to a certain spot and then is gets stuck somewhere and cannot unlock the door. The interior side does not have a problem.
Is that something I can fix myself?
The sticking cylinder either needs to be tightened or loosened one complete turn.
@@24hrMrLocksmith Thanks. Tightened/loosened how:?)
Does anyone know how to remove the locks that have metal plugs where the screws should be? I can't figure out a non-destructive way to remove the plugs.
You can gently pry them out with a small flathead screwdriver.
Need help! Trying to add a new remote door unlocking door thingy.
Ive taken it apart but then ran into this thing.
If u take it off and can put my device in as the circle u see is a bit to small and wont fit . Trying to send you a photo cant send photo.
Ive taken it apart but that square box
My door is apt metal door
Is a bit too small to fit in. my new device Horbil door unlocker
I want to put a good security deadbolt and doorknob on my mothers frontdoor, but need one that is longer tban what they are making these days Yhe holes are set in farther i guess. I have found some, but would like to know if you can recommend one that you feel is a really good one.
Five inch backset from the edge of the door to the center of the hole?
@@24hrMrLocksmith Thankyou so much for responding to my question.
From the edge of the door to center of doorknob or center of deadbolt key hole, it measures 4".
When I had been looking for a security set I believe it was one with a 5 inch backset. I had purchased a normal sized
set which was way too short even with the option of setting it longer.
Hi I was wondering the gold part that you pulled out with the key, is it possible that can fall out due to wear and tear? I’m asking because I came home and put my key in and unlocked my door and that piece came out of my lock with the key! I freaked out and thought I was burglarized but I was told by maintenance it could just happen and I don’t believe it.
If the end cap was not installed properly or worn it can slowly unwind over time. I see this all the time.
My dead bolt looks similar, but there is no hole for an allen key...
pry off the round plate. screws underneath.
Thanks. Very helpful demo
I have absolutely no use for this information yet I watched the whole video just in case it might come in handy one day lol
Thank you. This is useful!
plese show how to get screws in on lock b360 single cylinder dbolt
Thank you, sir!
How do I open a rusted dead lock?
Which type of lock would you prefer, instead?
Hey Terry! Of course you have a channel! U are the man!
i have this lock, and i need to replace it. But my deadbolt plate will not come of after removing the two screws? So i cant access the the 5/64th setscrews. I'm baffled. Any suggestions?
Maybe the plate is stuck on with paint or glue.
Remove the plate
@@24hrMrLocksmith interesting, I never thought of that. I'll try to gently pry it off. Thank you
What if you don’t have a key .
Very slick .great video 😎🏖
Interesting. Never ran across this lock
I like to learn about old locks.
You have the key> I lost the key. No solution for me?
Can anyone tell me how to remove a double-sided lori dead bolt without the key to open the door?
Thanks so much..dead on info...big help for me...
This video saved my ass Thank you!!
Not feeling a set screw with the little wrench.
What if we don’t have a key
If the door is open, no problem. You can still remove the lock cylinder without a key.
How do you get the Allen key in the right spot if you don’t have the key to unlock it?
I've been turning this thing for ever no results 😢
What if you don’t have the key??
If the door is open you can still remove the cylinder. Then replace or shim, pick it open and rekey b
Hi Terry thanks so much for the excellent video (as all your videos are). Quick question: I’ve bought an old house that the previous owner at some point installed double cylinder Lori locks on all exterior doors. They’re a giant pain because if the deadbolt is locked and someone comes to that door you have to have a key to unlock it from the inside to let someone in. I want to convert it to a basic single cylinder lock with a simple knob in the inside for easy locking and unlocking without the key . Can I easily convert mine, and keep the same common house key? Or do I need to buy a whole new lock and get it rekeyed to the house keys?
my mailbox has like a piece of plastic jammed in it we’ve tried to get out with pliers but it won’t work also it’s a mailbox with others like how an apartment would be
Call your local locksmith to open your mailbox.
How do you get this off without the key? Its unlocked, but for the life of me i cant find the key
I’d also love to know how i can proceed without the key.
The way you jiggle that key when it's deep inside that tight cylinder really gives me pause. Its always interesting to watch other gentlemen operate their equipment! Remember, always love your parents, dont run with sissors, drink milk, and brush your teeth.
God bless
🤣😝😝😝🤪🤪
no place for Allen wrench. What now?
If it is a Lori Deadbolt then there is a spot for an Allen Wrench.
What if the door does not open
take out the hinge pins
4:40
IF ITS CONFUSING FOR U AND U R A LOCKSMITH APPRENTICE OR A ,,NEW LOCKSMITH'' THEN U R IN WRONG TRADE..I RECOMMEND FLIP-FLOPS SELLING
Really
I can't mine out to save my life.
overengineered.....
40+ yrs ago it was a great idea. A locksmith could take a Mortice cylinder in any keyway and install it into the Lori Deadbolt. Now we can use Commercial Grade deadbolts and swap out the key-in-knob cylinder.
⁹⁹>ii>ii>