1964 Ford Falcon Build

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 76

  • @aarondean6878
    @aarondean6878 9 років тому +6

    Very nice 64, I have a 65 , love the 64-65 body style more than any other years.

  • @larrylewis6725
    @larrylewis6725 6 років тому +2

    Awhhhhh Bubble Hood (muscle underneath) and Wheels that SHINE!!!! What more could you ask for?!! Would like to hear the sounds from it. Great job guys!!!

  • @rweller49
    @rweller49 12 років тому

    Absolutely one of the sweetest rebuilds of a 64 Falcon I've seen. Very nice first class job.

  • @wan80520
    @wan80520 8 років тому +1

    부러워요.
    새롭게 태어나는것들~~

  • @robkallok77
    @robkallok77 3 роки тому

    Extremely cool Jon - thanks for the inspiration!

  • @Jvcomet
    @Jvcomet 3 роки тому

    Beautiful! Thanks for sharing 👍👍

  • @jrmesser3
    @jrmesser3  14 років тому +1

    @bartsigler ....THATS THE REASON I WENT WITH THIS SET UP , i DIDNT WANT TO CUT UP THE CAR,.....8 INCH RIM WITH 255/40/17 ....PROB COULD SQEEZE 265/40/17 IF YA GOT CUSTOM BACK SPACE ON THE WHEEL BUT WOULD BE REAL CLOSE !!!!

  • @SrColon309
    @SrColon309 5 років тому

    WOW, very good job. Beautiful suspension

  • @brucemorris6319
    @brucemorris6319 8 років тому

    Nice build love that paint. That hood is cool i want to put a shaker on mine.

  • @fire1937
    @fire1937 12 років тому

    Awesome work on this 64, I can't wait until I have my hands on one. Nice color too, i'm planing on spraying my 79 f100 something similar to this.

  • @bearkid4u
    @bearkid4u 12 років тому +1

    Goddamn.. i wish mine looked like that! lol. i been restoring mine for the past two years on a budget.. Oh well. one day, one day. Thats some damn good work.

  • @FLAV3R
    @FLAV3R 12 років тому

    Beautiful car man! Love the paint job and the custom work you have done on the rear end. And don't listen to the haters about the trim, i ripped mine off of my 64 as well. Love the soundtrack as well.

  • @ADRIAN-fb9xj
    @ADRIAN-fb9xj 7 років тому +5

    Nice Car.....The music didn't really work with a '64 Classic Car.....Nice colour, good that you left the mouldings off, much neater. Suspension set up interesting, hope it's had all the R&D done on it elsewhere, and it works....Interior looks good, nice steering wheel, damn shame after all that work it's got a Slush Box in it.....That Thing on the Bonnet? Not required, I think you need to go back to the Drawing Board on that one....The wheels at least are a 5 spoke design, but not quite Old School enough, a bit Glitzy......But I bet you're loving it, and that's the main thing.

  • @adambedell73
    @adambedell73 9 років тому +1

    Great looking car, nice job! A shame though to not put the side moldings back on as that it what really sets the 64 a part from the rest.

  • @fitzyholden1036
    @fitzyholden1036 8 років тому +2

    love it, lot of good taste choices right there.

  • @california123able
    @california123able 10 років тому +1

    What an Awesome job!! I love any car build...Novas, GTX's, Falcons, and even Rebels..lol If you don't know what a Rebel is...Google it!
    Don't let the hate mail bother you...I am still trying to understand why anyone would pay 30k for a 66/67 Nova..Doh!
    A Falcon was the predecessor to the Mustang...and they go as fast too!!
    You build a car like this for the love of a car and not because your going to flip it for more money.
    Go Figure.. If you had a name like "Foose", someone would be dropping over 100k for the same car...
    Bottom line...Great car, Great build, Great video, Enjoy it, it looks AWESOME!

  • @thommy2815
    @thommy2815 3 роки тому

    Cool to see a WA guy working on a falcon

  • @jrmesser3
    @jrmesser3  13 років тому

    @ratt617
    No ...There was no clearance issues with the crossmember, I used the rod and motorsports mustang II set up there was enough room that I could run a tunnel ram with no prob., I also used a oil pan and pick up from a fox body mustang and lowered it as close to the crossmember as possible , I acually used short tube headers from a fox body mustang as well there was no clearance issues with the column and or shaft ...the current set up is Edelbrock 289 torker intake with a holley 650

  • @moterdude1959
    @moterdude1959 12 років тому

    A lot of very nice work. Nice car and video

  • @davidcoffin9632
    @davidcoffin9632 12 років тому

    like the music, great looking car..!

  • @traviswillis5926
    @traviswillis5926 9 років тому

    REALLY NICE CAR!!!

  • @ratt617
    @ratt617 13 років тому

    @jrmesser3 Ok, so you just went with the teardrop hood because you liked it, not because of clearance issues. Great, that makes me feel better. Thanks.

  • @TOBYH
    @TOBYH 10 років тому

    Awesome job!!!!!!!

  • @FordFalcon1962nBlue
    @FordFalcon1962nBlue 12 років тому +1

    i got a 62 i like the trim more on em

  • @2uned08
    @2uned08 8 років тому

    sweet falcon

  • @kevinmcintire9642
    @kevinmcintire9642 8 років тому +1

    the 1964sadan I have had for 28 years it was my first car I would love to be able to do this to her

    • @1978ranger
      @1978ranger 4 роки тому

      I got a 64 sedan too it is my first car

  • @AZCobraman
    @AZCobraman 8 років тому +9

    Great car, but I had to mute that technocrap in the background. :o[

    • @jrmesser3
      @jrmesser3  8 років тому +1

      +AZCobraman i dont think of rob zombie as techno crap .........but whatever !!!

    • @AZCobraman
      @AZCobraman 8 років тому +3

      Didn't get more than 5 or 6 seconds into it, sounded pretty techno at the beginning. Tried jumping ahead to check it out and yeah, I still would have muted it. :)

    • @1978ranger
      @1978ranger 4 роки тому

      I just turned my volume down a bit

  • @fordfairlane662dr
    @fordfairlane662dr 5 років тому

    Ford Falcons and Comets were totally the shiznit

  • @bartsigler
    @bartsigler 14 років тому

    Excellent thanks for the information. Where did you get all the sheet metal forward of the Gas Tank ? I cant seem to find that stuff anywhere ?

  • @brianmarion8543
    @brianmarion8543 8 років тому +1

    Where did you get the trunk pan? Is it a mustang pan or are pans made for falcons. Thanks

    • @jrmesser3
      @jrmesser3  8 років тому +2

      Idid not have to replace the trunk pan , that Is the original trunk just cleaned up and painted .

  • @cecilshivers5386
    @cecilshivers5386 6 років тому

    SWEET RIDED 👍

  • @fordfairlane662dr
    @fordfairlane662dr 5 років тому

    All that engine bay clearance and a puny small block

  • @jamesbascombe6869
    @jamesbascombe6869 4 роки тому

    Nice

  • @scottroe1087
    @scottroe1087 7 років тому

    what's the color called on this beauty it's gorgeous?

  • @CarlosReyes-el3oj
    @CarlosReyes-el3oj 2 роки тому

    Falcon 👍👍👍👍👍🇲🇽

  • @pennswoodsed
    @pennswoodsed 12 років тому

    Hi,what angle do the shocks run at and what spring rate. Super Job.!
    Thanks,Ed

  • @elmagicocustoms
    @elmagicocustoms 14 років тому

    Great looking car. Awesome work too. I am currently working on a 64 sprint also. That looks like a Rod & Custom front end there, but who makes that rear end if you don't mind me asking.

  • @quentinmeidinger1752
    @quentinmeidinger1752 8 років тому

    I'm actually starting on mine right now it's not at bad as yours but it's up there. How long did this take you to do and how much money

  • @onestopcustoms
    @onestopcustoms 12 років тому

    do you have any more pics of your rear end setup?

  • @joeridley2015
    @joeridley2015 2 роки тому

    Original 4 speed car and u put an automatic in it?

  • @bartsigler
    @bartsigler 14 років тому

    I assume you didnt back half the car. What is the biggest tire you can fit without back halfing the car ?

  • @seawalkersee
    @seawalkersee 14 років тому

    Is there a web page or something you posted more pix on for the rear end build? I want to see more of it if that is possible. Off of what did you base it?

  • @corbinjohnson2523
    @corbinjohnson2523 6 років тому

    Where did you get the interior done at? Specifically the seats.

  • @scotthayes542
    @scotthayes542 12 років тому

    hey, i love this car. Im currently building the same car. can you please tell me where u purchased your body sheet metal? im having a hard time finding what im looking for

  • @chevellesbc
    @chevellesbc 9 років тому

    car is awesome

  • @ratt617
    @ratt617 13 років тому

    Is there ar clearance issue with the breather and the stock hood with the mustang II front cross member? I'm installing a mustang II front end on my 65 right now and I'm worried about my stock hood clearance. I didn't want to have to drop another $400 on a teardrop hood. I have a 302 with Edelbrock Performer RPM intake and heads. Thanks.

  • @bdwhitetailhunter5
    @bdwhitetailhunter5 11 років тому

    what color is that from? is it some factory color? if its a custom color what is the color code? i love this color!!!

  • @jrmesser3
    @jrmesser3  15 років тому

    Thanks Alot

  • @1978ranger
    @1978ranger 4 роки тому

    I like them stock but it looks ok

  • @rickydyess8869
    @rickydyess8869 5 років тому

    What front suspension swap is that? Im building a 64 that my wifes brother gave her before he passed away. I would love to change the front like that to make more room for bigger motor and better handling. Any info i would really appreciate it

    • @jrmesser3
      @jrmesser3  5 років тому

      Ricky Dyess this is the Rod & Custom Motorsports mustang II Kit ... I have used 2 of these kits ... simple and clean

    • @rickydyess8869
      @rickydyess8869 5 років тому

      @@jrmesser3 thanks. It looks great. Mine will be in memory of my brother in law and he loved the car. Its been sitting since 04 and the 260/2speed needs to go for something more up to date.

  • @jrmesser3
    @jrmesser3  14 років тому

    @elmagicocustoms
    The rear end set up was all built by myself, there is no specs out for this aplication , I used the photos from total control products as a reference and designed all the components my self to work with the falcon platform

  • @DzDetailingGarage
    @DzDetailingGarage 12 років тому

    which front stering do you got in there??

  • @championcity739
    @championcity739 14 років тому

    have 64 ford falcon SBF, what header did you use for this build

  • @dustinjoel6213
    @dustinjoel6213 7 років тому +1

    The rear looks completely custom from what I can tell. Question being is how much did it cost and how much would it cost to replicate for someone(if possible?). The rear is the last thing I need to get on my 65 Falcon. Any info will help.

  • @jrmesser3
    @jrmesser3  12 років тому

    what sheet metal are you looking for ??? the quarter panel patch came from dearborn classics and other sheet metal was found at swap meets and donor cars, most of it was factory , only changed partial drivers quarter panel and drivers fender, amazon is now offering patch panels and full sheet metal parts....dennis carpenter is another one and falcon parts .com

  • @yellow242
    @yellow242 11 років тому

    Who is the group of the two music tracks? Great choice of music!

  • @kowsful1
    @kowsful1 13 років тому

    I love my Falcons,but this is one, is one mean machine from diff work to the hood
    mean FORD FALCON BRO

  • @yaknow67
    @yaknow67 8 років тому

    What rear end kit is that?

    • @jrmesser3
      @jrmesser3  8 років тому +1

      +YaKnow This was not a kit , i built it from scratch in my garage with the help of a local race car builder, this idea came from chris alston chassis works.

    • @yaknow67
      @yaknow67 8 років тому

      +jrmesser3 very nice work

  • @joeh1940
    @joeh1940 9 років тому +1

    what rearend setup is that?

    • @1978ranger
      @1978ranger 4 роки тому

      If you dont have something positive shut up

  • @АндрейГангстеров
    @АндрейГангстеров 6 років тому

    👍

  • @dihappy
    @dihappy 13 років тому +1

    Boo, no trim :(

    • @kslot82
      @kslot82 6 років тому +1

      Yep, I concur

    • @1978ranger
      @1978ranger 4 роки тому +1

      It traps moisture and rusts. but i like the trim

  • @glenroyharris7234
    @glenroyharris7234 6 років тому

    .

  • @АндрейГангстеров
    @АндрейГангстеров 5 років тому

    👍