Yeah I got the same race bullets on my 2016 392 Scatpack Shaker a year ago. It’s the BEST mod I’ve done hands down! Sounds almost stock until you stab it, then she wails like a banshee. A LOT of snap, crackle and pop too. Oh, they are holding up fine no problem.
yes, totally agree. I am super picky with exhaust and am completely sold on these bullet mufflers. I dont think I will ever change them. Very livable and sound insane under WOT.
After installing the Dynomax, did you have any issues with drone? I’m running a straight pipe setup on an Infiniti M45 and have exhaust rasp and drone. Trying to get rid of both with these Dynomax exhaust resonators if owners of these can confirm if they produce/eliminate any rasp and/or alleviate drone.
I like how you hang the Red Key off your right hip. Makes is seem like a side arm or badge. Credentials! 😄 There was this time as I was pulling out of gas station in my Black Challenger Cat, this kid was with his mom in an SUV, watching me. As I pulled out, he straightened up, spying my front fender.🤔 Ah-ha! He was checking *MY* credentials. 😄
Good job guys. Subbed to both of you. Small channels unite! Check out my Car channel @ Bulli Kid Let me know what you guys think regarding audio video. Been using just iPhone 6 and some lav mics. Last video bought GoPro 6 and using a cheap shotgun mic
Say mopar family I just installed mines and seen the welder put a piece of PIPE in between the MINI RACE BULLET was that suppose to be or was it cause it's to big for my factory EXHAUST?
Good points about "keyboard warriors".😄 SRTs handle just fine. Lateral g is 0.92-0.93??? That's plenty. And you're right. 🤔 Dodges are off in their own world. While able to handle and drag race, (even some people track them), the best thing I find, is enjoyable driving! I know you get that.😉
Hey, checked out the link for the exhaust. It says 3", but isn't the piping 2.75"? Just curious how the placement turned out. Did they slip it over the stock pipe?
I think they are perfect. Loud but not too loud. I am very VERY picky with exhaust. I had like 7 different catbacks on my 16 mustang before i found one I liked. These dynomax bullets are perfect to me. First time go lol. They have increased in volume slightly with miles, which is a good thing.
@@Zander13Productions with replacing the mids with these did you notice any out of the ordinary sounds such as buzzing/clicking or anything when you start it up during cold starts or driving over time. I ask because I had vibrants 1794 replaced my mids and I get like a buzzing sound I assume coming from the active exhaust valve due to more air being pushed out from the vibrant being less muffled then the stock. I have a hellcat challenger
Zander13 Automotive also would like to see some pictures of what these look like installed. I’ve been thinking about getting some for my scat or just using some regular old glass packs.
Hey Zander... Car sounding great! Tips for getting that brake dust off without scratching up your paint? I’ve been looking to pick up a power wash and foam cannon to do touch free washing, but wondering if it will get the dust off.
Power Stop Z26-1405 Z26 Extreme Performance Carbon-Ceramic Brake Pad www.amazon.com/dp/B01AGBXJO6/ref=cm_sw_r_sms_apip_nRgtLgFhlaXu2. Never have dust anymore for the most part
“I know you love the car, it’s a GREAT car” 🤣 man I can’t wait to get mine! Love that attitude. What’s your take on the gas? That’s the only thing I’m nervous about
Whoa, thats crazy. I am kinda tired of the town i live in. TN is a great state though. Pigeon forge is a nice area. Every one in a blue moon we get a baby tornado
Yo, I wasn't gonna call this until you called someones ride a POS. Your driver side pipe is not centered and it looks like shit. All in all it sounds great.
Correct. SRTs handle fine. It's pure propaganda that they don't. Lateral g is 0.92-0.93??? That's plenty for getting around, and is certainly more potential than I have driving skill.🤔
@@Zander13Productions With the completion of this mod - can you put in the description what you now have on the car from the cat backwards? What pipes are from the cat to the mid muffler area, then you have the Dynomax Race Bullet 24250 then what kind of pipe to the factory X then what kind of pipe to the rear mufflers and what kind of rear mufflers? I really liked how your mod sounded when the work was done and I'd like to tell my local muffler shop exactly what I want them to do so I get the same results. - Thanks.
All that bullshit filler and about 1 minute of actual content. You forgot to mention the 24250s are shorter than the stock mufflers and will need additional piping. Just some useful information your audience probably came to hear.
11:12 you’re welcome
The goat.
Yeah I got the same race bullets on my 2016 392 Scatpack Shaker a year ago. It’s the BEST mod I’ve done hands down! Sounds almost stock until you stab it, then she wails like a banshee. A LOT of snap, crackle and pop too. Oh, they are holding up fine no problem.
yes, totally agree. I am super picky with exhaust and am completely sold on these bullet mufflers. I dont think I will ever change them. Very livable and sound insane under WOT.
Exactly what I’m planning to do to my Cat, very informative video!
think I’m gonna go the mid muffler delete but with just straight pipes. This sounded more tamed specially on idle.
After installing the Dynomax, did you have any issues with drone? I’m running a straight pipe setup on an Infiniti M45 and have exhaust rasp and drone. Trying to get rid of both with these Dynomax exhaust resonators if owners of these can confirm if they produce/eliminate any rasp and/or alleviate drone.
I like how you hang the Red Key off your right hip. Makes is seem like a side arm or badge. Credentials! 😄 There was this time as I was pulling out of gas station in my Black Challenger Cat, this kid was with his mom in an SUV, watching me. As I pulled out, he straightened up, spying my front fender.🤔 Ah-ha! He was checking *MY* credentials. 😄
That's what I do too wear my red key there too
Is the Longer end the inlet ? And short end the outlet ? Or does it not matter ?
I cut my mufflers out and installed the MFER’s active exhaust. It sounds great no rasp!
I miss your 18 videos 😩😭😭 loved your build
I know brother. Just wsit till the 2020 comes around 😎
Same. You and orange GT had cleanest stangs
Greg Panchovilla I still have mine😎😎
Good job guys. Subbed to both of you. Small channels unite!
Check out my Car channel @ Bulli Kid
Let me know what you guys think regarding audio video.
Been using just iPhone 6 and some lav mics.
Last video bought GoPro 6 and using a cheap shotgun mic
I will def check out your channel!
So did you remove mid-mufflers AND resonators when you put these on?
Say mopar family I just installed mines and seen the welder put a piece of PIPE in between the MINI RACE BULLET was that suppose to be or was it cause it's to big for my factory EXHAUST?
Great video, just got mine 4 weeks ago used with 3k miles on it. Love it so far!
Awesome and congrats!
Zander13 I’m going for delete first and if it drones will put the bullets in. Did you buy the support clips with them or just the bullets?
I just bought the bullets. If you delete your resonators like you are talking. It will def sound awesome!
Damn Z. That bark is music to my ears. Now when you bark, those new tires will really bite the road.
hell yes!
How do you get any traction with those cheapo tires?
I have the same mufflers and jba midpipes and it’s loud I love every bit of it
Good points about "keyboard warriors".😄 SRTs handle just fine. Lateral g is 0.92-0.93??? That's plenty. And you're right. 🤔 Dodges are off in their own world. While able to handle and drag race, (even some people track them), the best thing I find, is enjoyable driving! I know you get that.😉
Oh yes, and loving every minute of it! This is like the first car I have owned that my wife even likes too lol.
Will I get the popping and cracking cause I'm currently STR8 PIPE and I dont get it
Thank for the video! Why not remove the resonators at the tailpipe? Thanks!
Drone
Hey, checked out the link for the exhaust. It says 3", but isn't the piping 2.75"? Just curious how the placement turned out. Did they slip it over the stock pipe?
Well no seasons in 2 years. Lol. Did you buy them? What was the measurements
Sounds nasty 👌🏻
I was actually gonna go with a quieter pair of mufflers, but you're changing my mind. Also, good job retaining some sort of muffler. That's mature.👌
I think they are perfect. Loud but not too loud. I am very VERY picky with exhaust. I had like 7 different catbacks on my 16 mustang before i found one I liked. These dynomax bullets are perfect to me. First time go lol. They have increased in volume slightly with miles, which is a good thing.
@@Zander13Productions with replacing the mids with these did you notice any out of the ordinary sounds such as buzzing/clicking or anything when you start it up during cold starts or driving over time. I ask because I had vibrants 1794 replaced my mids and I get like a buzzing sound I assume coming from the active exhaust valve due to more air being pushed out from the vibrant being less muffled then the stock. I have a hellcat challenger
Thug9030 no issues for me when I had it
@@Zander13Productions good to hear and you replaced the mids correct not the one rear muffler
Why does it backfire? That's the sound I'm trying to get
you need some Zl1's addons rockguards, helps with the dust sticking to the side of the car.
yes I do! may have to get me some.
Zander13 Automotive also would like to see some pictures of what these look like installed. I’ve been thinking about getting some for my scat or just using some regular old glass packs.
Hey Zander... Car sounding great! Tips for getting that brake dust off without scratching up your paint?
I’ve been looking to pick up a power wash and foam cannon to do touch free washing, but wondering if it will get the dust off.
That would work. I will be swapping to a different break pad setup soon that minimizes dust.
Power Stop Z26-1405 Z26 Extreme Performance Carbon-Ceramic Brake Pad www.amazon.com/dp/B01AGBXJO6/ref=cm_sw_r_sms_apip_nRgtLgFhlaXu2. Never have dust anymore for the most part
Just some advice: stop talking about the mustang, the haters, etc. Just move on. Keep making your videos with content all about the hellcat.
Yes, fully intend on doing that.
Sounds BADASS!
“I know you love the car, it’s a GREAT car” 🤣 man I can’t wait to get mine! Love that attitude. What’s your take on the gas? That’s the only thing I’m nervous about
Those these race bullets for an 18 RT?
Man I need to move to where you are. I lost my power for nearly a week (three tornadoes touched down nearby in NY!). Back online now.
Whoa, thats crazy. I am kinda tired of the town i live in. TN is a great state though. Pigeon forge is a nice area. Every one in a blue moon we get a baby tornado
I hear 3 decibals that’s what I’m gonna do once warranty fades away plus the weight reduction
1 minute of muffler, 15 minutes of face.
Why did you block out your plate at the beginning and end but leave the plate visible at the muffler shop?
i didnt really do it to block the plate. only did it to the exhaust parts.
what do you do for a living?
UA-cam
Right..
That’s why you get a manual. You can still rev it in traffic. The auto is limited to 4500 when you rev it in neutral :(
Mustang did that to me I pass by him and floored the manual on neutral I bet I scared him
Whoa
What inlet/outlet size?
Sold!
you must’ve forgot to hide the plate again lol
What City do you live in, in Tennessee? I saw the video of you at the car meet at the old Kroger in Hendersonville.
I live in Clarksville
LMAO @ cat call
I'm the OG of this mod. I'm where it began. I should be getting royalties for fuck sakes from dynomax...
Hellcat world, your welcome!!!
Thanks
Zander13 Automotive 😂 😂
Sounds nice
I have an srt 8 I want loud!!:) I text other bloggers,, no one will respond,,How can I get loud with out that 1200$ cat back price?
Remove the resonators and change the stock mufflers to these or Super 10s
Yo, I wasn't gonna call this until you called someones ride a POS. Your driver side pipe is not centered and it looks like shit. All in all it sounds great.
Correct. SRTs handle fine. It's pure propaganda that they don't. Lateral g is 0.92-0.93??? That's plenty for getting around, and is certainly more potential than I have driving skill.🤔
Same here. PPL get too caught up statistics. I daily this HC and it certainly out performs me!
What is drone??!!
It’s sound nasty man good job 🔥
Thanks 😀
@@Zander13Productions With the completion of this mod - can you put in the description what you now have on the car from the cat backwards? What pipes are from the cat to the mid muffler area, then you have the Dynomax Race Bullet 24250 then what kind of pipe to the factory X then what kind of pipe to the rear mufflers and what kind of rear mufflers?
I really liked how your mod sounded when the work was done and I'd like to tell my local muffler shop exactly what I want them to do so I get the same results. - Thanks.
I wish you could hear mine and I didn’t spend a lot of money either
Did he say tires breaking free at 80 mph, sounds like bullshit to me.
FYI you tried blocking your license plate but didn’t when it was at the muffler shop 😂 so kinda failed at keeping your plate # hidden
And how is that “explicit”? :headscratch:
it sounds better!!
I have land sail on my lightning 22s
Put nitto tires
Sounds Great !!
I can here you NOW! Lol
I hear ya lol
17 bucks at summitt
idle sounds like a truck
My mustang sounds better than my old hellcat
All that bullshit filler and about 1 minute of actual content. You forgot to mention the 24250s are shorter than the stock mufflers and will need additional piping. Just some useful information your audience probably came to hear.
Sounds good, but the GT 2018 sounds more mean 👌🏻
Yes it did
wanna race from a dig against my 2018 gt? Also the car sounds really good
Sure. Would make for a great video
Zander13 Automotive I think we would both just do giant rolling burnouts
I have some drag radials on the way soon. should hook alot better.