Very nice bumper. I just bought an 03 Tracker as a toad for my motor home. No real plans for upgrades other than wheels and tires this fall, but I do enjoy seeing what other people do.
Best plate bumper I’ve seen yet...!!! Looks great and functional... and the best part, you did it yourself !! This is the first of your videos I’ve watched and now I’m subscribing... I’m going to build one for my 2001 4runner, thanks for posting, this is inspiring.
Amazing bumper looks great awesome features.Love suzuki vits there just awesome i have a 2004 just love it lots km on it but going strong. cheap to run simple to fix.
Really well thought out. I am curious about the long term durability of the air reservoirs with vibration, pulling forces, and compressor condensation, but still, really nice!
I have built a few bumpers with air reservoirs before. I've never run into problems with leakage or corrosion...but have never cut them apart to check either.
Hello my friend absolutely great bumper I would be interested in purchasing one... how do I contact you for further information I have a 91 Suzuki Sidekick JX
Fixing to start a bumper for my 2000 tracker glad you made this video it will help alot. what was the approximate weight of the bumper minus the wench? if you dont mind me askin. anyhow good looking bumper and nicely done. Have a great day.
Did you use a DPDT switch to make your lights work with two power sources as well as light the LED properly? I have mine wired this way but had to unhook the LED because it stayed lit all the time.
Are there only 4 bolts holding the bumper to the frame? Like the looks and it is just a matter of time before I do something similar as the front and back bumpers just do not look 4x4ish.
6 bolts; 4 on the side brackets and one on the top of each frame rail. I’ve done several full power pulls with the M8000 and there is zero movement. It’s plenty strong.
Hi, Are you using after market independent front suspension? What brand is that? Is that as strong as solid suspension? Thank you, Regards from Indonesia.
itsa good page with a ton of fun and helpful folks, if your interested. most are always willing to lend a hand/info, and love seeing/sharing rigs and projects
Guess u did mention it right at the very beginning just caught that. Thats fairly thick stuff then hey. I would have thought maybe 1/16 thick, that must be heavy and bullet proof then lol. I guess if your doing some winching with it must need it fairly sturdy then.
Wish there were some talented and educated people like u in my country..........
I don't even own this vehicle, but I'm watching it for your DIY/fabrication skills! Nice work!!
Very nice bumper. I just bought an 03 Tracker as a toad for my motor home. No real plans for upgrades other than wheels and tires this fall, but I do enjoy seeing what other people do.
Once again, someone does an awesome job on an unpopular 4x4 and the prices go ballistic. Loved the look.
Best plate bumper I’ve seen yet...!!! Looks great and functional... and the best part, you did it yourself !! This is the first of your videos I’ve watched and now I’m subscribing... I’m going to build one for my 2001 4runner, thanks for posting, this is inspiring.
Nice work, I seriously dig this. When I find the right tracker/sidekick I'm definitely fabricating the bumpers
That's an awesome idea to use the bumper as an air tank !!!
Love it. You did a super job and I like how you made innovative built ins to the bumper.
using the mag light holder is a great idea !
Thanks for sharing this project! You've helped inspired me to make my own bumper for my 91 Trooper!
This is Awesome! You should be an engineer for SpaceX!
Very cool design and functionality!
That is beautiful fabrication.
amazing bumper, amazing integration, amazing video!!! just over all.. good job, man.
I built one of those in my dreams. Nice job! Would look great on my 04' Chevy Tracker!
Amazing bumper looks great awesome features.Love suzuki vits there just awesome i have a 2004 just love it lots km on it but going strong. cheap to run simple to fix.
Varios tipos de bonper
superb fabrication work.
I'd be worried someone would steal my Suzuki badge, not. LOL Seriously nice build.
wow. amazing front bumper hopefully make one for my 92 rodeo sooner or later.
What a sweet build man , Thumbs up !!
That is a one of a kind thing of beauty. 👍
I would seriously pay for one that nice.
Wow. Most impressive!
Sweet build
Very neat work
that is a super nice and functional bumper!!!!!! excellent job
I'd expect noting less. Awesome job!
Very nice Job!!!! Congratulations
Thanks!
really well done mate
Very nice work!
Nice work. Looks great.
that's amazing work , great job
@4:16 Wow😲 the tow hook switched places....
Nice bumper.
nice setup! id have the lights a bit more recessed or protected, but still great design
Awesome job
nice build.
great build thank you!!
Wow! Genius.
Sick build! 👍
That bull bar is better quality then ARB.
you're a smart guy. thanks for the video
Badass! time and love making that i see
Love it man nice work. I have the same rig and also in Oregon lol.
nice work
freaking awesome! !!
Nice job on the bumper.
Nice job
excellent job !!!. Great. I suppose you haven't got any drawings ?
Really well thought out. I am curious about the long term durability of the air reservoirs with vibration, pulling forces, and compressor condensation, but still, really nice!
I have built a few bumpers with air reservoirs before. I've never run into problems with leakage or corrosion...but have never cut them apart to check either.
Good job!
really great
top job!
I need the measurements of that Bull bar, could you tell me? Thank you.
Very nice........this give me some ideas !!!!
beautiful bumper.......are you worried at all about water sitting in those air tanks? I didn't see a drain
Thinking of building something similar for my Colorado. Was it real hard to wire in and mount the air compressor? Thats my biggest concern.
have you done a rear /swing spare tire gate
Cary Kane not for my Sidekick, but I'm mulling that exact project around
Matt, do you have plans for this bumper you can share?
How did you wire that light switch up to work with and without your high beams? I’m very interested in doing this as well
Nice work!
Can you give us the design plan with dimensions? Please!
Would like to see one of these kits for a Mitsubishi Mightymax.
thanks and no worries. Btw...you did an awesome job on that bumper that suzi is one lucky one to be yours. Any ideas for the rear?
thanks! I'm kicking around some ideas for the rear...will be sure to do a video when I build it.
@@MattVerley HI MATE I LIKE YOUR BUILT. CAN YOU BUILD AND SELL TO US ?
wery NICE.
Hello my friend absolutely great bumper I would be interested in purchasing one... how do I contact you for further information I have a 91 Suzuki Sidekick JX
Hi man,can u share drawing to build diy bumper.look amazing
what is your tire size 31 ? lift and body lift ? it really looks good
Fixing to start a bumper for my 2000 tracker glad you made this video it will help alot. what was the approximate weight of the bumper minus the wench? if you dont mind me askin. anyhow good looking bumper and nicely done. Have a great day.
Did you use a DPDT switch to make your lights work with two power sources as well as light the LED properly? I have mine wired this way but had to unhook the LED because it stayed lit all the time.
Are there only 4 bolts holding the bumper to the frame?
Like the looks and it is just a matter of time before I do something similar as the front and back bumpers just do not look 4x4ish.
6 bolts; 4 on the side brackets and one on the top of each frame rail. I’ve done several full power pulls with the M8000 and there is zero movement. It’s plenty strong.
@@MattVerley Thank you , I have not ventured as far as removing the front bumper to see what lies beneath.
Hi, Are you using after market independent front suspension? What brand is that? Is that as strong as solid suspension? Thank you, Regards from Indonesia.
Великолепная работа! Вот только в россии с таким оборудованием запрещают ездить по дорогам =(
WHAT WHEELS & size are they?!?!
That is definitely amazing job. Where did you get those switches? I want something like that for my geo tracker.
You can buy them here: www.otrattw.net/home.php
what size tires do you run on your sidekick ?
They're metric; but measure out about 32x11.5
what kind of lift do you have on it?
nice!
Do you have any template?? I want to make it one to my vita94...
Hi there, can you please send me the measurements
sewerzuk, are you on suzuki samurai owners 2.0 on FB?
nope
itsa good page with a ton of fun and helpful folks, if your interested. most are always willing to lend a hand/info, and love seeing/sharing rigs and projects
HOW MUCH FOR YOU TO BUILD ONE FOR MY 2000 SUZUKI GRAND VITARA?
John Leonard sorry...I don't build bumpers to sell. too much time into them for me to make any money.
nice!!! Beautifully done!!!! What gauge metal did you use? Thinking about building one!!!
The Other Guy most of the bumper body is 3/16 flat plate, the winch Mount and mounting brackets are 1/4"
sewerzuk any particular type of metal?
that shit is dope.... do you build for sale or just for fun?
great!!!
great job...wow. and a great video as well....not often do you get both. cheers
What thickness metal was used for the bumper ?
3/16" for most of the bumper, 1/4" for the winch mount plate
Guess u did mention it right at the very beginning just caught that.
Thats fairly thick stuff then hey. I would have thought maybe 1/16 thick, that must be heavy and bullet proof then lol. I guess if your doing some winching with it must need it fairly sturdy then.
@@MattVerley bom dia irmão como está nos estamos bem graças adeus
I have this car. Suzuki escudo...smoking a
lot..my mechanic tells me i have to replace the rings.
Hi matt, are you interest in sell my cad plans for this ? Let me know. Thanks
I have one sidekick (model 95) but right now, I can't do anything with him cuz I'm broke *insert sad face.
Лайк! Один из самых удачных бамперов! mm? Себе такой сделаю!
how much if u build me one?
I really couldn't build one for somebody else for any kind of reasonable price. I have a huge number of hours into this one.
👍👍👍
Muy bueno. l like
Have 2000 suzuki vitara jlx car and want to make iron bumper
Bom dia irmão como está. Eu gostei desse trabalho de parachoque metal esto a pidir ajuda como fambricar um parachoque metal
Can you build me one
I need to find someone to build me a similar bumper!
I have a tracker for sale .. 2wd
ความยาว/สั้นยาว ตัดต่อเได้ปะ
уау
fijat