Nevermind I take it all back... take off your caps... I just did my caps one was at 87 and the other one was 12 finally got this figured out thank you I've been jetting up down all around and the whole time it was a bad spark plug cap. Lol
Thank you so much for sharing you knowledge! Been able to detect the problem with my FZ6 S2 with your video ;) Checking your channel to learn a bit more!
Can you give me your thoughts on my readings ? Primary .9 Secondary 6000 Plug cap 1 . 5700 Plug cap 2 . Won't read Banshee intermittentantly wont run . Obviously getting new plug caps . Spec on primary is .28 to .38 and I am at .9 , is this coil good still ? Primary is a little high but not terrible , thanks anyone for your thoughts
hi ran the test got a good read on primary but secondary no reading neither plug either but the bike was running fine except for the right side it would just spit out fuel what should i do???
Hey bro, when I test the primary I don’t get any ohms like you did, if I test cont the dvom beeps which means there’s cont... is the coil bad or am I doing something wrong? The meter at 200k ohms literally reads 00.0 ohms. The secondary gives me 5.4 and the cap gives me 5.8 like yours.
This channel is a blessing ! Everything is explained in detail !
Nevermind I take it all back... take off your caps... I just did my caps one was at 87 and the other one was 12 finally got this figured out thank you I've been jetting up down all around and the whole time it was a bad spark plug cap. Lol
My ignition coil reads at 9.8 ohms could it just be the pack or the caps or wires? Connection? I need help thanks
thanks for the videos! great job
Thank you so much for sharing you knowledge! Been able to detect the problem with my FZ6 S2 with your video ;)
Checking your channel to learn a bit more!
Thanks for sharing
When I read my wires it doesn’t say anything I tried cutting the wires shorter for new cable and still nothing is it bad ?
Hey bud,
Super helpful for the Banshee! not sure if you said in the video, but do these same ohm readings work for testing blaster coils?
Mine reads 16k ohms about 3x higher anything I can do to fix that I was thinking trim the wires they are about 2feet long
So my primary is reading 0.6 is that bad? Secondary reads fine though.
Thanks for this video, I guess it would be the same for rd400 cdi, rd350lc and rz350.
Can you give me your thoughts on my readings ?
Primary .9
Secondary 6000
Plug cap 1 . 5700
Plug cap 2 . Won't read
Banshee intermittentantly wont run . Obviously getting new plug caps .
Spec on primary is .28 to .38 and I am at .9 , is this coil good still ? Primary is a little high but not terrible , thanks anyone for your thoughts
I test the ignition coil and said 0.9 down 0.5 is it good ??
hi ran the test got a good read on primary but secondary no reading neither plug either but the bike was running fine except for the right side it would just spit out fuel what should i do???
Emmanuel Gamez spitting out fuel because it isn't firing change your secondary and cap.
Emmanuel Gamez
Hey bro, when I test the primary I don’t get any ohms like you did, if I test cont the dvom beeps which means there’s cont... is the coil bad or am I doing something wrong? The meter at 200k ohms literally reads 00.0 ohms.
The secondary gives me 5.4 and the cap gives me 5.8 like yours.
joe mercedes
Try it set to 20K, see what happens. I believe that’s the setting you need, mine is auto ranging so I don’t have to mess with it.
So would a bad cap like that make it miss fire
murdahteam no fire at all
Nice.
Would you happen to have 2 banshees you would trade for a 2006 gsxr 1000? I am located near Austin
BfloBusa 1
nah man i sure dont
got nothing on home for my secondary but on 20k setting I got 6.05
Wellington Bajana me too did you ever figure out what was wrong?
Thank u!
Second :(