I like your vids because it's like you resent making them. It's like your wife is forcing you to go to brunch with her parents after drinking all night.
This force you speak of...perhaps a book should be written about this force. Maybe H.G. Wells book From The Earth To The Moon, with the mysterious substance Cavorite, invented to counteract gravity, was really a metaphor for this stopping this....force.
I love the deadpan, Canadian "humour" ( humor for those of us in the states) along with it being informative. One of the best guitar maintenance videos I've seen!!! Good job, sir
Matt Glidewell silver polish clothes- what do you mean? Where to buy that? I bought a used 80's guitar and its coming soon, expecting it to be very dirty so I'm watching these cleaning techniques.
The shit on the fret board after the scrub is the stain that was put on it at the factory. I also use boiled linseed oil. It's a very fine oil on wood because it gets into the pores to protect the wood deep down and if enough coats are applied it ends with a very shiny finish. Colt used that method to protect wooden grip back in the 1800's. Getting that kind of finish requires patience since boiled linseed oil takes around a month to completely dry.
I know that a professional guitar repair guy might laugh at what Dunlop charges for their stuff but I bought the Dunlop System 65 Guitar Maintenance Kit awhile ago and I like it so much that I bought another one because I was starting to run low on Cream of Carnauba wax (oh that stuff is so good.) I have 12 guitars of all kinds and this kit really covers everything--if you don't have open grain fingerboards look for a simpler kit that doesn't have the fretboard Cleaner & Prep and Conditioner because you can't use them on maple necks (just use the standard cleaner and Carnauba wax.) The kit comes with a couple of nice clothes but you will need a bag of T-shirt rags too. It also comes with a piece of 8000 grit sandpaper (well it's not sand"paper" because it's got a stronger backing) which is great for polishing frets. I am not disagreeing with anything that Dave is saying or doing, I simply love this Kit and I use it every time I change strings--guitar spa day. My only complaint about the kit is that the fret board conditioner applicator is stupid. It's nice for the first 12 or so frets but then it doesn't fit so I just dab the liquid onto a rag. Just really nice and easy, good instructions for your first few times, I feel really safe using it on any guitar and the end result is really impressive. Thanks Dave for all of your videos!! You really make guitar maintenance and repair fun!
I freaking love your videos, man. You're a no-nonsense kind of guy, and I like that! Gets right to the point without a lot of fuss, cusses every now and then and delivers fine work. Consider me subscribed!
thats the difference between boiled and raw linseed oil. Boiled (which isn't actually boiled) has various solvents mixed in to dry faster. It is used as a wood finish to protect wood, keep out moisture and add a gloss finish. Works great on gun stocks. Raw linseed oil can take 2 weeks or more to cure which is why its great for fingerboards. It lasts a nice long time and keeps moisture in. Not the best for other things like finishing wood or oil based paints.
A clean micro-fibre cloth dry or with a light spritz of water for cleaning the body and nothing more. I prefer not to use any petroleum based products. They are usually flammable, smell bad and are bad for our environment.
Back in the late '60's I put patchouli oil on my fretboard. I don't know if it was any good for the rosewood but all the hippie chicks seemed to like it....Cheers
Dave, I would like to offer another tip for you. Try out stuff called " 'Mothers' Mag and Aluminum polish". The best metal polish I've ever used. I love it on hardware, just makes stuff shine better than new. Works on just about all metal, from aluminum to chrome, nickle to brass, Great stuff for any job. It's only about $11 a can, and I believe you can get it at Wal-mart or any other hardware store. I suggest you give it a try. GREAT for "Smoker" guitars! Anyway, great vid Dave, keep on rockin
I cleaned my bass a few minutes ago with the help of your videos... little ronsonol and some linseed oil and this peavey millenium's quilted maple cap is back to errrrrr old self.... trans blue really shining =)
Old english lemon oil isn't actually lemon oil at all, it's just mineral oil and mineral oils are pretty much safe to use. Genuine lemon oil, don't put on wood, it's acidic.
Hey Dave, I think you might be confused about Lemon Oil. Lemon oil isn't acidic and has pretty much shit all to do with lemons.. It's just mineral oil with yellow dye + lemon scent. Just for people reading this- Lemon oil isn't the same thing as lemon pledge or other cleaning product, I'm talking about stuff made for musical instruments. I use Planet Waves (It's a part of the D'addario company) lemon oil. It's only for fretboards through. Don't go putting it on the body. watch?v=qf61M3lBraY 4:00
What would recommend with cleaning the yellow smoke grime off a pickguard? I have an old 1964 Epiphone Newport bass that was obviously owned by a smoker.
when people say it smells fishy, I think there's a hint of cod liver oil when you first open the bottle. But once you start using it, that goes. btw - got a small 100ml bottle from local art store $4
Just heard the "Don't Smoke" comment, which I agree with, but I am a smoker. I was selling a 1953 Martin a while back, and played it a little to show the sound, and a guy had hit the buy it now, then contacted me and asked to nix the sale because he saw me smoking and wanted a guitar from a non-smoking environment. I cancelled of course, but had to laugh that somebody buying a 50 year old guitar that had been gigged with would think any would be from smoke free environments.
used some lighter fluid and linseed on my Gibson es 347 35 year old guitar and I just want to tell you thanks for the advice it came out freekin beautiful
I found purified linseed oil at Walmart, of all places. Found it in the art/craft aisle. 21/2 ounce bottle, it was only about $3,for us who only have a few guitars. Actually 6 guitars, but who's counting. Thanks Davey. Later man.
Dave I use windex on everything except bare wood if you use it on your feet board don't douch it wipe it off fast as you can than let it dry for mabe half hr than do the linsead oil.
Dave, You are misunderstanding. I'm talking about a real walnut. I take walnut, remove the pulp from the shell and rub it into the fretboard. That would be pure walnut oil. The pulp is soft and does not scratch the board. It protects the wood by adding natural moisture to it. I've been playing for 51 years and have been doing this for 20. My Les Paul lives it, my '70 Martin D-28 loves it and my Strat (USA) loves it. I don't do this on my maple board Strat. I wouldn't use lemon oil because of the acidity, very bad. PS.I enjoy watching your videos.
Lighter fluid is an oldie but goodie on electrics. Probably every old electric has had it used. I have a 100 year old acoustic with no finish left....I used bore oil on the fretboard....I know a damp cotton cloth is good for most, but what should I use on this...same thing and just make sure it's not wet...just damp, or a dry cloth??
where can i get a brush like that??? and is that what i ask for if i go into a hardware store??? thanks in advance love your vids.....never knew this about lighter fluid....always wanted to know what to use on my chrome and bridge stuff.....thanks so much for taking the time and doing these vids!!!!!!!!
Hi Dave! I really enjoy your videos. I find that you give a lot of good advice. I cleaned my stratocaster rosewood fretboard yesterday with lighter fluid and then put some guitar conditioner/cleaner/protector solution on it. Afterward I cleaned the frets with never dull. I didn't cover the frets with tape though. When I looked at my guitar in the morning I noticed two of the frets had some white streaks on them. I haven't had a chance to investigate further since I had to go to work but is that anything to be concerned about? Thanks!
Hey Dave. The first video I ever watched of you, I closed it after 10s. Totally wrong impression. I actually thought you were a drunk, tuque wearing hoser, from Brampton, but now I'm addicted to your channel! Your knowledge, combined with your Canadian sense of humor, is a much fun to watch as it is informative. I think last time I was in Canadian Tire, I bought hockey gloves, and beer. Didn't know they sold tires, HA! Seriously though, is lighter fluid safe on nitrocellulose finishes like on my 2013 white Gibson SG Standard? PS: Don't get gooched!
Dave I follow you and your video since long time ago, you're so funny man, and a very clever and handy man and luthier, I'm an amateur luthier and a guitar player and collector too, cheers from Argentina
Thanks a lot sir!!! your videos have been quite a teaching. Thankyou for taking the time out to reply. Good day. Ps: still awaiting a refretting video. someday hopefully. cheers!
Hi Dave- love your vids. Funny AND informative! In your opinion what is the best thing to clean/polish both a poly and nitro guitar finish? I have a Gibson and an Epiphone.
@XmyAssYTmofo ya I was just asking..however it doesn't damage the fretboard !!..Like dave said it has been done for years ! Your not sanding it !! It only steel wool, its the left over shavings crap that would be an issue ! :)
Woodwind bore oil for rosewood fretboard. If it's good enough for my ancient 1500's Crumhorn, good enough for my fretboard (museum curator recommended).
what would you use on a guitar that is starting to oxidize slightly.... I have a vintage blacktop les paul that seems to be going that way....I have heard not to do anything to using car wax and a buffer...the last thing i want to do is gooch it... thanks Dave, I love your channel!
Dave, what would you recommend for cleaning a butt load of chrome? I have a banjo that needs some cleaning up and I'm not sure how to go at it without destroying the chrome. Thanks for the vids, always love watching.
Hi Dave, I couldn't find that Simple Green Max in the U.S. I found regular Simple Green Concentrated. The label says to not use it on unfinished wood. Because you're wiping it right off, it should be okay, right? I used it already on a couple of guitars, (both rosewood,I havn't tried it on ebony yet) before i read the label, and it works great. I just want to make sure I'm not damaging the fretboards. Thanks in advance for the help!
TLTR: There is, but it's irrelevant in this case :) Boiled one takes longer to "dry" - which is not a problem, just feature. Also oil can be "boiled" and "purified" at the same time. Still no difference from the perspective of wood.
Dave, I have an 'I-been-ezzed' EDB 500. The Ergodyne series with the plastic bodies? Just wondering if the old lighter fluid trick will be fine on the finish/body material? Keep up the great advice, been a huge help! Cheers
hey davey, i see you are using Demco artist series purified linseed oil. These are specifically used for oil paintings. I live in dubai, all i have here is Daler Rowney purified linseed oil, again used for oil paintings. Same thing right? no harm? I did come across boiled linseed oil in ace hardware, but my guitar is not piece of furniture.
Dave I have a ancient acoustic, possibly from the mid 60's, and the finish has cracked over the years, from temperature variations and humidities, I'd guess, but I'm leery to use the lighter fluid on it, concerned it might affect the finish negatively or seep into the cracks... there's no exposed wood, but except for the neck, the finish is crazed, looks awesome and still sounds great... Ideas, or is fluid okay in your opinion ? Cheers!
I love your video .I'm with you on all your methods . I've been using linseed for a long time .( some olive oil too ) . I was responding to the guy who mentioned cricket bats .
Can u imagine derp who actually ends up foolishly burning a bowl or a cig or something...not paying attention or getting careless and actually ends up catching the whole guitar on fire and shit! Oh my god that would be a true nightmare
True. I had a huge fire in my workshop from that. Paint rags, varsol rags in a plastic bucket! It took a month to get the fire extinguisher powder out of everything.
When your done with rags with linseed oil ,soak in water seal in plastic bag and put in outdoor garbage can . Linseed soaked rags can self ignite and burn your house down. Have fun but be careful .
Dave how come no steel wool over the fret board? just curious your thoughts on it !! That's what I was always told to use !! Thanks again, Love your vids, great stuff !
Dave, have you ever tried 'bore oil' - used on woodwind instruments - after cleaning with a solvent like lighter fluid. Is your linseed oil the boiled variety?
Jimi Hendrix invented the "lighter fluid on the guitar" trick back in 1967...but it only worked once per guitar.
Yes Jimi's cleaning accident is well documented and should be a lesson to the youngn's how not to clean your guitar.
@@Dug6666666 lol
I like your vids because it's like you resent making them. It's like your wife is forcing you to go to brunch with her parents after drinking all night.
This force you speak of...perhaps a book should be written about this force. Maybe H.G. Wells book From The Earth To The Moon, with the mysterious substance Cavorite, invented to counteract gravity, was really a metaphor for this stopping this....force.
Sounds like Ee or from Winnie the Pooh, on acid
I love the deadpan, Canadian "humour" ( humor for those of us in the states) along with it being informative. One of the best guitar maintenance videos I've seen!!! Good job, sir
Dave, how do curl my straight hair?
***** then how can i straighten my curly hair ?
I find silver polish clothes very effective in removing tarnish from frets. gets the job done without removing any material of the frets
Matt Glidewell silver polish clothes- what do you mean? Where to buy that? I bought a used 80's guitar and its coming soon, expecting it to be very dirty so I'm watching these cleaning techniques.
He sounds like Mike from Breaking bad
+Yuval Tankel He sounds like Tommy Chong.
+Yuval Tankel hahaha you sire have awesome observational skills bro!!! haha \M/ \M/
"I know there's gals out there watching... I neglect you. I'm sorry." LOL
The shit on the fret board after the scrub is the stain that was put on it at the factory.
I also use boiled linseed oil. It's a very fine oil on wood because it gets into the pores to protect the wood deep down and if enough coats are applied it ends with a very shiny finish. Colt used that method to protect wooden grip back in the 1800's. Getting that kind of finish requires patience since boiled linseed oil takes around a month to completely dry.
evilcowboy
Should need a stain as rosewood has its own oil
I love the commentary, it was educational and entertaining.
Never thought this video would make me laugh so hard
i only discovered you the start of the year and i think youre a total legend. love watching your vids, better than tv.
I know that a professional guitar repair guy might laugh at what Dunlop charges for their stuff but I bought the Dunlop System 65 Guitar Maintenance Kit awhile ago and I like it so much that I bought another one because I was starting to run low on Cream of Carnauba wax (oh that stuff is so good.) I have 12 guitars of all kinds and this kit really covers everything--if you don't have open grain fingerboards look for a simpler kit that doesn't have the fretboard Cleaner & Prep and Conditioner because you can't use them on maple necks (just use the standard cleaner and Carnauba wax.) The kit comes with a couple of nice clothes but you will need a bag of T-shirt rags too. It also comes with a piece of 8000 grit sandpaper (well it's not sand"paper" because it's got a stronger backing) which is great for polishing frets. I am not disagreeing with anything that Dave is saying or doing, I simply love this Kit and I use it every time I change strings--guitar spa day. My only complaint about the kit is that the fret board conditioner applicator is stupid. It's nice for the first 12 or so frets but then it doesn't fit so I just dab the liquid onto a rag. Just really nice and easy, good instructions for your first few times, I feel really safe using it on any guitar and the end result is really impressive. Thanks Dave for all of your videos!! You really make guitar maintenance and repair fun!
Dave: Really, it puts an awesome shine on Rosewood.
Naphtha is not the same as methanol. Methanol is wood alcohol although sometimes it is called wood naphtha. Naphtha is a distillate from petroleum.
I freaking love your videos, man. You're a no-nonsense kind of guy, and I like that! Gets right to the point without a lot of fuss, cusses every now and then and delivers fine work. Consider me subscribed!
Too much linseed oil will raise the grain, the best I've found to keep moisture out is silicon spray, good for tremolo stops rust.
we canadians love dave.he is a fucking icon
This lady loves your videos. As always, thanks for all the helpful info
Rags with linseed oil on it.. can get hot even catch fire.. so water down or keep in closed container
Thanks for vids. :)
I put mine out to dry. once they are dry they are safe.
Waiting for a video like this to come out. Thanks a lot Dave!
thats the difference between boiled and raw linseed oil. Boiled (which isn't actually boiled) has various solvents mixed in to dry faster. It is used as a wood finish to protect wood, keep out moisture and add a gloss finish. Works great on gun stocks. Raw linseed oil can take 2 weeks or more to cure which is why its great for fingerboards. It lasts a nice long time and keeps moisture in. Not the best for other things like finishing wood or oil based paints.
A clean micro-fibre cloth dry or with a light spritz of water for cleaning the body and nothing more. I prefer not to use any petroleum based products. They are usually flammable, smell bad and are bad for our environment.
Back in the late '60's I put patchouli oil on my fretboard. I don't know if it was any good for the rosewood but all the hippie chicks seemed to like it....Cheers
On my Rosewood Fretboard I use a walnut to get an awesome shine. I take the walnut and rub it into the wood and than wipe it down.
Dave, I would like to offer another tip for you. Try out stuff called " 'Mothers' Mag and Aluminum polish". The best metal polish I've ever used. I love it on hardware, just makes stuff shine better than new. Works on just about all metal, from aluminum to chrome, nickle to brass, Great stuff for any job. It's only about $11 a can, and I believe you can get it at Wal-mart or any other hardware store. I suggest you give it a try. GREAT for "Smoker" guitars!
Anyway, great vid Dave, keep on rockin
Love the videos Dave. Humorous and informative 👌
What's your opinion on the Music Nomad cleaning products?
It's good
I'm glad i watched this video, i have a Korean Strat I'm going to clean and upgrade, got it at a pawn shop for $25!
I cleaned my bass a few minutes ago with the help of your videos... little ronsonol and some linseed oil and this peavey millenium's quilted maple cap is back to errrrrr old self.... trans blue really shining =)
Old english lemon oil isn't actually lemon oil at all, it's just mineral oil and mineral oils are pretty much safe to use.
Genuine lemon oil, don't put on wood, it's acidic.
Hey Dave, I think you might be confused about Lemon Oil. Lemon oil isn't acidic and has pretty much shit all to do with lemons.. It's just mineral oil with yellow dye + lemon scent. Just for people reading this- Lemon oil isn't the same thing as lemon pledge or other cleaning product, I'm talking about stuff made for musical instruments. I use Planet Waves (It's a part of the D'addario company) lemon oil. It's only for fretboards through. Don't go putting it on the body. watch?v=qf61M3lBraY 4:00
Definitely Recommend fine steel wool to polish frets. Brings them up really nice (provided they aren't gouged to death)
Thanks for the advice Mike, I found it very useful.
What would recommend with cleaning the yellow smoke grime off a pickguard? I have an old 1964 Epiphone Newport bass that was obviously owned by a smoker.
when people say it smells fishy, I think there's a hint of cod liver oil when you first open the bottle. But once you start using it, that goes. btw - got a small 100ml bottle from local art store $4
Just heard the "Don't Smoke" comment, which I agree with, but I am a smoker. I was selling a 1953 Martin a while back, and played it a little to show the sound, and a guy had hit the buy it now, then contacted me and asked to nix the sale because he saw me smoking and wanted a guitar from a non-smoking environment. I cancelled of course, but had to laugh that somebody buying a 50 year old guitar that had been gigged with would think any would be from smoke free environments.
used some lighter fluid and linseed on my Gibson es 347 35 year old guitar and I just want to tell you thanks for the advice it came out freekin beautiful
I've used Pledge for 20 years...works fine...definitely going to try out Linseed Oil....thanx for the great vids & advice.
Whatever cleans and doesn't make the thing stink after a while is ok for me.
Thank you! I'm Learning a lot from you!
I found purified linseed oil at Walmart, of all places. Found it in the art/craft aisle. 21/2 ounce bottle, it was only about $3,for us who only have a few guitars. Actually 6 guitars, but who's counting. Thanks Davey. Later man.
Dave I use windex on everything except bare wood if you use it on your feet board don't douch it wipe it off fast as you can than let it dry for mabe half hr than do the linsead oil.
I use Windex too. Its good if your guitar isnt that dirty. It's safe as long as you spray it on the rag.
Dave, You are misunderstanding. I'm talking about a real walnut. I take walnut, remove the pulp from the shell and rub it into the fretboard. That would be pure walnut oil. The pulp is soft and does not scratch the board. It protects the wood by adding natural moisture to it. I've been playing for 51 years and have been doing this for 20. My Les Paul lives it, my '70 Martin D-28 loves it and my Strat (USA) loves it. I don't do this on my maple board Strat. I wouldn't use lemon oil because of the acidity, very bad. PS.I enjoy watching your videos.
Thanks Dave !
Lighter fluid is an oldie but goodie on electrics. Probably every old electric has had it used. I have a 100 year old acoustic with no finish left....I used bore oil on the fretboard....I know a damp cotton cloth is good for most, but what should I use on this...same thing and just make sure it's not wet...just damp, or a dry cloth??
where can i get a brush like that??? and is that what i ask for if i go into a hardware store??? thanks in advance love your vids.....never knew this about lighter fluid....always wanted to know what to use on my chrome and bridge stuff.....thanks so much for taking the time and doing these vids!!!!!!!!
Hi Dave! I really enjoy your videos. I find that you give a lot of good advice. I cleaned my stratocaster rosewood fretboard yesterday with lighter fluid and then put some guitar conditioner/cleaner/protector solution on it. Afterward I cleaned the frets with never dull. I didn't cover the frets with tape though. When I looked at my guitar in the morning I noticed two of the frets had some white streaks on them. I haven't had a chance to investigate further since I had to go to work but is that anything to be concerned about? Thanks!
Thank you! Keep up the great vids
I will try my best,i really thank you for your help!
This guy is really George Carlin's brother.
Your guitar is not furniture I love it.
Jimi used lighter fluid, and a match too!
Hey Dave. The first video I ever watched of you, I closed it after 10s. Totally wrong impression. I actually thought you were a drunk, tuque wearing hoser, from Brampton, but now I'm addicted to your channel! Your knowledge, combined with your Canadian sense of humor, is a much fun to watch as it is informative. I think last time I was in Canadian Tire, I bought hockey gloves, and beer. Didn't know they sold tires, HA! Seriously though, is lighter fluid safe on nitrocellulose finishes like on my 2013 white Gibson SG Standard? PS: Don't get gooched!
"You sir are a gentleman and a scholar"
Very informative video.
dave, you are the freakin man
many thanks!
Dave I follow you and your video since long time ago, you're so funny man, and a very clever and handy man and luthier, I'm an amateur luthier and a guitar player and collector too, cheers from Argentina
great
Thanks a lot sir!!! your videos have been quite a teaching. Thankyou for taking the time out to reply. Good day.
Ps: still awaiting a refretting video. someday hopefully. cheers!
Hi Dave- love your vids. Funny AND informative! In your opinion what is the best thing to clean/polish both a poly and nitro guitar finish? I have a Gibson and an Epiphone.
@XmyAssYTmofo ya I was just asking..however it doesn't damage the fretboard !!..Like dave said it has been done for years ! Your not sanding it !! It only steel wool, its the left over shavings crap that would be an issue ! :)
Can you show us a guitar that needs a neck shim? And how to do it? What to look for or what to measure
Dave's World of Fun Stuff I try to watch them all. Guess I missed it. Cool videos my friend. Thanks for doing all of these!
Woodwind bore oil for rosewood fretboard. If it's good enough for my ancient 1500's Crumhorn, good enough for my fretboard (museum curator recommended).
Lighter fluid? Am I the only one who thinks this is madness?
you'd be surprised what luthiers would do in the old days
Linseed oil! Yes!
Best thing to use. A $5 bottle from a hardware or art supply store will last you years on years.
You are the man Dave! Just one question...what the F is a GOOCH? We dont know that word way down here in Virginia!!
:)
Linseed oil is great for cricket bats as well.
what would you use on a guitar that is starting to oxidize slightly.... I have a vintage blacktop les paul that seems to be going that way....I have heard not to do anything to using car wax and a buffer...the last thing i want to do is gooch it... thanks Dave, I love your channel!
depends where it's oxidizing. if its surface rust. coke and aluminium foil will do the trick. obviously clean off the coke after.
Friday hammer and Gooch Street...love it!! Thanks for the laugh Dave!
Dave .thank’s for the tips. Be safe. You do a lot of guitar stuff.is thair anybody that does drum kit restoration?on video’s? 🥁
Turtle wax express shine works great I use it on my78' strat,epiphone 310 and sg been doing this for years and have yet to have a problem,
Dave, what would you recommend for cleaning a butt load of chrome? I have a banjo that needs some cleaning up and I'm not sure how to go at it without destroying the chrome. Thanks for the vids, always love watching.
Great! I'll pick up some. Thanks for the quick reply and again for the vids.
+sivad2 I used to play banjo, this stuff works well too.
www.simichrome-polish.com/
Hi Dave, I couldn't find that Simple Green Max in the U.S. I found regular Simple Green Concentrated. The label says to not use it on unfinished wood. Because you're wiping it right off, it should be okay, right? I used it already on a couple of guitars, (both rosewood,I havn't tried it on ebony yet) before i read the label, and it works great. I just want to make sure I'm not damaging the fretboards. Thanks in advance for the help!
well...i'll try to search it in my nearest art store.thanks for the feedback.
Is there a difference between purified linseed oil and boiled linseed oil?
TLTR: There is, but it's irrelevant in this case :)
Boiled one takes longer to "dry" - which is not a problem, just feature. Also oil can be "boiled" and "purified" at the same time. Still no difference from the perspective of wood.
one is hot the other not
Could you use a 100% tong oil??
Tone G'Wax. It's the only aerosol guitar polish left on the planet. It's similar to the old Gibson aerosol spray polish- the best there is!
no idea why i tried to learn something from this video.
hell Dave use Windex in that lacquer we painted cars with it for years. it won't hurt a thing
thank you very much :)
keep up the good work!!
Dave, I have an 'I-been-ezzed' EDB 500. The Ergodyne series with the plastic bodies? Just wondering if the old lighter fluid trick will be fine on the finish/body material? Keep up the great advice, been a huge help! Cheers
Helpful tips thanks
. If you ever come to New Mexico and check out the Caverns look me up. I can give ya helpful tips where to stay, eat etc...
Thanks Dave! Ive never had a guitar with a fretboard like my DBZ, and i dont wanna wpie the stain/dye off
hey davey, i see you are using Demco artist series purified linseed oil. These are specifically used for oil paintings. I live in dubai, all i have here is Daler Rowney purified linseed oil, again used for oil paintings. Same thing right? no harm? I did come across boiled linseed oil in ace hardware, but my guitar is not piece of furniture.
The friday hammer, ahhaha.
good show
How many electric eels does it take to change a light-bulb?
Dave I have a ancient acoustic, possibly from the mid 60's, and the finish has cracked over the years, from temperature variations and humidities, I'd guess, but I'm leery to use the lighter fluid on it, concerned it might affect the finish negatively or seep into the cracks... there's no exposed wood, but except for the neck, the finish is crazed, looks awesome and still sounds great... Ideas, or is fluid okay in your opinion ? Cheers!
Okay, mate, I'll get onto it tomorrow !
Thanks for the prompt reply, and really appreciate your videos, plenty of great info!
We used to put linseed oil on our cricket bats as kids. Makes sense that it'd work ok
+icepug A cricket bat is saturated with linseed oil to prevent it from cracking when used . On a guitar you should use only a very thin film .
I love your video .I'm with you on all your methods . I've been using linseed for a long time .( some olive oil too ) . I was responding to the guy who mentioned cricket bats .
Some people makes a big deal of some basic stuff that you showed us
Is that a laugh I heard in the background when you said, "Wreck your guitar an way you want"?
I believe that Jimi Hendrix used Ronson as his guitar cleaner of choice !!
Can u imagine derp who actually ends up foolishly burning a bowl or a cig or something...not paying attention or getting careless and actually ends up catching the whole guitar on fire and shit! Oh my god that would be a true nightmare
Really good tips dave, looks like it's time to get away from that dunlop 65 stuff.
Love the hammer where did u get it
@davey4557 who taught you all this knowledge??? and would you take on an apprentice? great vid! :)
Dispose of linseed soaked rags properly. They can spontaneously combust
True. I had a huge fire in my workshop from that. Paint rags, varsol rags in a plastic bucket!
It took a month to get the fire extinguisher powder out of everything.
When your done with rags with linseed oil ,soak in water seal in plastic bag and put in outdoor garbage can . Linseed soaked rags can self ignite and burn your house down. Have fun but be careful .
Dave how come no steel wool over the fret board? just curious your thoughts on it !! That's what I was always told to use !! Thanks again, Love your vids, great stuff !
Dave, have you ever tried 'bore oil' - used on woodwind instruments - after cleaning with a solvent like lighter fluid. Is your linseed oil the boiled variety?
why do you do everything back to front?
Do you mean the regular simple green or is there a product called basis?
@davey4557 Dave, do you use boiled or raw linseed oil?