Thank you so much! All of your videos have been so helpful!!!!! I have bought so many of your suggestion, the F50, Fusion paint and even the eye cream!
Just bought the F50 brush and will be picking up some Fusion Mineral paint this weekend because of your videos. I’m excited to try, thanks so much for your informative videos!
Maily Leavitt that’s exciting - have fun and thank you for watching! Good luck and remember if you start with a damp brush it will help the process, as well you can mist the piece and sand in between coats if you find it hard to work with at first
I have watched a couple of other videos about this paint and, to be frank, they don't cut the mustard. So-so techniques, no second coat, etc. This video, however, is excellent and the lady has great technique. I am impressed and as a result will try this paint on my kitchen project. Thank you.
Accidently I just used Fusion black ( don't recall the name)... It happened to me needing black paint for a dresser, and saw it for sale in an antique store near me... so I bought the $20 jar. I painted a large half table, two coats, a night stand - two coats, and a dresser two coats, and I still have some left for stenceling. I probably need a better brush, because I did have brush strokes, unfortunately. It does not thickens up unlike the chalk paint. Most of, again by accident, I was interrupted, and forgot to sand the sides of my dresser. I realized it when I was brushing paint on, it went on kind of slippery... Oh shoot, I thought, I would let it dry, and sand off. I was surprised to see that paint actually stuck to the un sanded surface very well, I did not have to sand it!. I tried few brands, but I decided to go with Fusion line. I love dixie belle line too, but I have a Fusion distributor near me, so I am switching.
Out of interest, yesterday I decided to test six brands of top quality paint brushes with Fusion Midnight Blue mineral paint. The brushes used were: Cling On, Wooster Alpha, Purdy Monarch Elite, Corona Chinex, Staalmeester and Picasso Chisel. I used them to paint six previously painted (satin oil paint) pieces of pine moulding. The original paint was in excellent condition and after cleaning with sugar soap I scuffed the surface to aid adhesion. There was not too much difference in the results but the Cling On was definitely the winner with Monarch second and Alpha third and the Corona a close fourth. Whilst the Staalmeester Pro Hybrid Flat brush was OK, it was nothing to write home about. I was a bit disappointed in the Picasso, a brush I have used for so many painting projects, which was the worst of the bunch although still quite good. I have used this brush extensively for different water based paints on trim and it has always given first class finishes, so clearly it is not really suitable for Fusion paint. I was impressed with the Cling On brush, a really great finish. All brushes gave superb coverage with two coats of paint. The object of this post was to reinforce what Kimberley has already said and to help others decide if they are thinking of using a different brush. Happy painting, all.
Your review is so helpful. I’ve just received my very first Clinton paint brush. I hadn’t even h heard of these brushes until you video. I Will let you know how I get on with it. Xxx
Karen Baldry Thank you I’m so glad you found it helpful! I absolutely love my cling on brushes - I hope you do as well! Please do let me know - I love hearing feedback! Happy Painting!
itsmeamanda01 so it depends on your projects - I do a lot of larger dressers so I love my flat F50. If u do smaller pieces u my prefer an f40, the oval brushes are great for legs and corners. So just try and evaluate what u will be working on and go from there
I’m a bit disappointed with my Cling on brush. I bought the f 50 long handled one and the short handled one. It shed 4hairs as soon as I started to paint😢 it’s not meant to ever! lose hairs. Also the bristles separated whilst painting leaving a poor finish. I decided to switch brushes and used my Annie Sloan brush which was much better. Maybe I was doing something wrong. I won’t give up on the cling on, I will persevere. To be fair this is my first ever prospect so it’s a case of trial and error. 👍🏻😊
Karen Baldry so when you first get them - you should rinse them and go through them with water and fan them out. So any loose bristles come out for the first time. I have never had shedding issues. As for the separation - that can happen with any brush designed like this - they are not packed tight like the Annie brush. So that is too wet that’s causing that. Don’t give up the are great brushes. 😀
Have you used the matte poly topcoat product on black? I want to paint a coffee table and I feel like the top will need a topcoat, but wondering if putting it on dark colors is a concern.
Yes I would not (and fusion doesn't either) recommend it. it can cloud and streak. The fusion is durable on its own, but I understand wanting additional protection - I would recommend the stain and finishing oil in natural - its a great topcoat for black and dark colors.
Thank you for the review! I have a few questions if you don't mind: 1) If this is not a chalk paint, does that mean the finish is not as porous therefore harder to distress it or create vintage looks with it using wax/glazing/washing/blending techniques? 2) Why would I buy fusion if I can just use a good water-based acrylic paint from say, Benjamin Moore or Sherwin Williams? I am wondering what makes Fusion better for furniture painting. 3) Does Fusion require little to no prep similar to what Chalk paints claim? Thanks so much!
Of course - thank you for watching 1 - this paint does distress easily either wet distress or dry with sanding - it has a matte finish as well like chalk paint 2 - This is a paint intended for furniture and not walls (although can be used for them if you wanted). It has a built in top coat , yet having a matte finish. It is also no VOC product and more boutique type color selection. Sherwin Williams trim enamel is a good paint an poly in one, I would stay away from using any type of household latex paint on furniture - for adhesion reasons. 3 - Here is the thing with no prep - there is no such thing - I have a video on here about it. If you were to just apply your paint to non cleaned, wiped down and sometimes scuffed piece - you may have adhesion issues at the very least - all paints require some sort of prep - some more than others. Just the oils from our hands over the years or furniture cleaners need to be wiped clean in order to prep the piece and have a beautiful long lasting finish. The key to a great finish is the right prep. sometimes less than others of course - depending on your piece. Hope that helps!
@@BorninaBarnBoutique Thank you so much! In your opinion, how does it comparer to Annie Sloan in terms of end results and ease of use? Thank you again!
purplerain409 of course! Honestly other than the matte finish they are pretty different. Annie blends well, dries quick and sands nicely. Some people say fusion is challenging to work with and brushstrokes are an issue - I haven’t had that experience myself. Fusion has a top coat built in, dries matte and gives a nice durable finish on its own.
I would very much appreciate your help with advising me on what paint to use for kitchen cabinets. My husband is a huge fan of big box stores and I’m open to other options. I don’t want to use chalk style paint so I am hopeful that you can help me😄. Thank- you in advance!!!
Shelley Finet so my personal choice would be General Finishes. I wouldn’t paint with household paint (like you would get at the big box stores - they are not made for cabinets/wood). I’m not a fan of the the furniture paint line that they do sell or the cabinet transformation kits - it’s not easy to work with. This is a big project and if your new to painting this type of project you want the easiest/good quality products to work with. They have a product called brushable white enamel or their milk paint that is self leveling and self sealing. If you need more assistance - I do offer virtual lessons that would help you in more detail getting started with your project and making it a successful one - from what you will need, how to prep properly (which is key with kitchen cabinets), product list, the process from start to finish, etc.
Born in a Barn Boutique You are So kind to respond!!! I have learned So much from your video’s- they have been Super helpful!!! You do a Fabulous job with explanations!!! I just purchased Java gel stain for my kitchen table after I saw your video- I will tackle that soon. Again Thank- you 😄. I am so happy that I found your channel!!!
What would you recommend putting over top of the coal black fusion paint that I'm refinishing some chairs with? I wasn't going to seal them but they will be in our main dining space.
Kristina Sara I would for sure especially with coal black - it marks up really easy (fingerprints, wipe marks, etc). I would use the Stain and finishing oil in natural if your brushing on its your best choice.
@@BorninaBarnBoutique Thanks for the quick reply, heading out to pick some up now! How long do you wait before using the oil after painting with the coal black?
Kristina Sara you bet! It’s been a while since I have used it over paint - I believe a few hours - I always wait until next day to topcoat - being cautious!
itsmeamanda01 sometimes it depends on what the client wants. If I’m brushing or spraying (GF sprays gorgeous) and what look I’m going for - Fusion is more matte and GF is more sarin finish😄
Have you ever put a primer like Kilts on a piece that you’re going to paint white to prevent yellowing? In other videos I noticed they recommend sanding the piece lightly before adding the paint do you do this process
Marilyn gilroy I use primer all the time, I don’t use Kilz. There are better primers for furniture out there. Zinnser makes several, general finishes, etc. different jobs call for different primers. They prevent bleed through, yellowing on whites and help with adhesion. Sounds like a video!
I have not used the fusion paint yet but I think I will be for my newest an old wooden rolling tea cart its really ugly!If I want too do 2 colors a white base with azure in a cross hatched design and maybe a lace stencil design around the edge..my questions are is this possible with fusion paint and can I use painters tape too make the lines then pull off after the second coat and it wont pull off the white? I don't do much wood working ...YET,but i want to
Robin Burch you will love it. you can - you need to let it dry down for a few days before taping just to be safe, also I would use frog tape for delicate surfaces as your best bet
kimberly barr so prep well and then use their ultra grip and top coat and you will have success. I have done a few that were laminate and Formica tips without issue. I do - Annie was the first paint I ever used. I still use today but more for blending projects (the new formula is a bit thicker and I water it down when working with it). Thank you so much for watching!
I have a vinyl upholstered chair that I want to paint. The vinyl is in excellent condition but the color does not work for my home. Do you think Fusion is the best product for my chair project?
Josie Noyola so I personally have not painted vinyl with Fusion - I hear if you wax it that will help. But I would try heirloom traditions paint - they say this can be put on vinyl, leather, etc. check that one out.
Great video, but i'm curious what do you use to clean the brush after the paint or if you use ultra grip priming? Just hot water and leave in water till next use? Do you use a roller of any type ever, micro fiber generics?
I primarily spray now, but I clean brushes when I am done with the job, not in between coats and if I am switching products I always clean (say from ultra grip to paint). My cling on brushes when I am using frequently, yes I wash and then keep the tips suspended in water (they recommend this), if I am not using as much I will store dry hanging upside down to preserve the bristle brush shape. I do not roll, I have tried once and didn't care for it, but I know many that do and love it, its just not my thing
@@BorninaBarnBoutique Ah ok, what are you using to spray these days? So i guess just plain water should do the trick on cleaning in between. Have you ever used Bin on a cabinet as a primer for dark oaks? Im unsure if i should apply ultra grip after the Bin or not, im guessing not.
@@markm75 I use a Fuji Q4. Yes that and some brush cleaner or dawn soap. I use several primers - BIN cover stain, zinsser shellac, etc. only use ultra grip when your concerned about adhesion (laminate or super slick surfaces).
Hello! Thank you for this video. I just found this paint & noticed you did a review. You helped me in my research about 1.5 years ago. I painted my kitchen cabinets using Heirloom Traditions Paint. While I am super happy with the overall outcome, I found that there was a learning curve for me on HTP. How would you compare this Fusion paint to HTP?
Hi. Your quite welcome. To be honest there are learning curves with most products - I love fusion - it is one of my top paints - it dries matte, brushes and sprays beautifully, has a top coat built in (super durable), it’s a thinner consistency than heirloom. Coverage is great like heirloom. Great great paint line
@@BorninaBarnBoutique thank you for the quick response! I’ll definitely be doing some more research into it. I have another huge project & I was nervous about the paint this time around. Thank you for sharing & all your reviews. ❤️
It depends - sometimes it’s a look - I want more sheen. Most of my work is client work, so it’s up to the client to decide what they want. I also always topcoat high use pieces. Fusion doesn’t need a topcoat since it has one built in, so it’s a just a personal choice if you want more protection
I’ve used General Finishes Milk paint for about 7 different furniture projects, but haven’t tried Fusion yet.. I would love to know how you feel Fusion is similar/different to GF MP.
So I use them both. GF more so but I like them both. They are different in the way they apply, I haven't had this experience myself, but a lot of people say they have issues with brushstrokes and Fusion. It dries matte, where GF has a low lustre sheen. GF is self sealing, Fusion has a topcoat built in. Their odors are about the same, their consistency is about the same same. Fusion has more of a color selection, Both spray very well. Both sand very nicely. So major differences - the finish, the brush application (I think GF is smoother application and self levels better). Hope this helps!
A matte topcoat - Fusion is a matte finish paint. Keep in mind matte topcoat is not as durable as any of the higher sheens - fusion has a built in topcoat anyway, so on it's own its plenty durable. Just a note - matte is less wipeable, then one with a sheen.
Sherry Johnston Hi Sherry welcome to my channel - thank you for subscribing! So normally I would say with this line you don’t need to seal - BUT because it will be in a bathroom I would recommend - you don’t have to wax and for a bath I wouldn’t recommend anyway- Fusion makes great topcoats that are easy to use - you can use their wipe on poly which I really like or they have a hemp oil as well. You don’t have to stick to the same line - you can also go with General Finishes High Performance Top Coat - which is a great top coat as well
Yes I understand in some of my older videos the volume wasn’t great. Old camera and too far away with no mic! I have adjusted this in my newer videos! Thanks
Awesome! One of my favorite paints to spray, comes out beautifully - I dilute 10-25% depending on the consistency of the color I am using with distilled water.
Janis Rice this is what the company started about their paint - Fusion™ is a 100% acrylic, water-based paint. The “mineral” in Fusion™ Mineral Paint refers to the pigments used which are harvested from the earth. ... Once cured, a surface painted with Fusion™ is both water and stain proof. No primer or top coat is required, making it more of a one-step kind of paint.
For sure softer - if you go to my website you can view in my gallery - I have all names of paints I used on pieces if you click on it - www.borninabarnboutique. Net
I really love your video!!! Not meaning to be rude, but so many other videos go into a bunch of talk that has nothing to do with the subject, talking to the dog, talking to people who are signing on, etc. When they respond to people just joining, it’s every few seconds and I just find it very annoying! I just want the straight talk!
Thank you so much! All of your videos have been so helpful!!!!! I have bought so many of your suggestion, the F50, Fusion paint and even the eye cream!
You are so welcome! Thats awesome! :)
Just bought the F50 brush and will be picking up some Fusion Mineral paint this weekend because of your videos. I’m excited to try, thanks so much for your informative videos!
Maily Leavitt that’s exciting - have fun and thank you for watching! Good luck and remember if you start with a damp brush it will help the process, as well you can mist the piece and sand in between coats if you find it hard to work with at first
Beautiful paint sample!
had to subscribe....one of the most informative channels for this stuff.
Thank you so much! 😀
Love the video and your calm voice!
hc thank you! 😀
I Recently tried Coal Black and Bayberry. LOVED IT.
Both great colors - glad you loved it!
I have watched a couple of other videos about this paint and, to be frank, they don't cut the mustard. So-so techniques, no second coat, etc. This video, however, is excellent and the lady has great technique. I am impressed and as a result will try this paint on my kitchen project. Thank you.
Terence Davis Thank you! Good luck with your project - you are going to love working with this paint!
Accidently I just used Fusion black ( don't recall the name)... It happened to me needing black paint for a dresser, and saw it for sale in an antique store near me... so I bought the $20 jar. I painted a large half table, two coats, a night stand - two coats, and a dresser two coats, and I still have some left for stenceling. I probably need a better brush, because I did have brush strokes, unfortunately.
It does not thickens up unlike the chalk paint. Most of, again by accident, I was interrupted, and forgot to sand the sides of my dresser. I realized it when I was brushing paint on, it went on kind of slippery... Oh shoot, I thought, I would let it dry, and sand off. I was surprised to see that paint actually stuck to the un sanded surface very well, I did not have to sand it!. I tried few brands, but I decided to go with Fusion line. I love dixie belle line too, but I have a Fusion distributor near me, so I am switching.
Out of interest, yesterday I decided to test six brands of top quality paint brushes with Fusion Midnight Blue mineral paint. The brushes used were: Cling On, Wooster Alpha, Purdy Monarch Elite, Corona Chinex, Staalmeester and Picasso Chisel. I used them to paint six previously painted (satin oil paint) pieces of pine moulding. The original paint was in excellent condition and after cleaning with sugar soap I scuffed the surface to aid adhesion. There was not too much difference in the results but the Cling On was definitely the winner with Monarch second and Alpha third and the Corona a close fourth. Whilst the Staalmeester Pro Hybrid Flat brush was OK, it was nothing to write home about. I was a bit disappointed in the Picasso, a brush I have used for so many painting projects, which was the worst of the bunch although still quite good. I have used this brush extensively for different water based paints on trim and it has always given first class finishes, so clearly it is not really suitable for Fusion paint. I was impressed with the Cling On brush, a really great finish. All brushes gave superb coverage with two coats of paint.
The object of this post was to reinforce what Kimberley has already said and to help others decide if they are thinking of using a different brush. Happy painting, all.
Thank you for thanking the t8me to share!
I came across this paint information 2 weeks ago.
Is there a store I can buy both the paint & brush at?
Your review is so helpful. I’ve just received my very first Clinton paint brush. I hadn’t even h heard of these brushes until you video. I Will let you know how I get on with it. Xxx
Karen Baldry Thank you I’m so glad you found it helpful! I absolutely love my cling on brushes - I hope you do as well! Please do let me know - I love hearing feedback! Happy Painting!
Im trying to decide which clingon brush I want to start with.. which did you get and do you love it??
itsmeamanda01 so it depends on your projects - I do a lot of larger dressers so I love my flat F50. If u do smaller pieces u my prefer an f40, the oval brushes are great for legs and corners. So just try and evaluate what u will be working on and go from there
I’m a bit disappointed with my Cling on brush. I bought the f 50 long handled one and the short handled one. It shed 4hairs as soon as I started to paint😢 it’s not meant to ever! lose hairs. Also the bristles separated whilst painting leaving a poor finish. I decided to switch brushes and used my Annie Sloan brush which was much better. Maybe I was doing something wrong. I won’t give up on the cling on, I will persevere. To be fair this is my first ever prospect so it’s a case of trial and error. 👍🏻😊
Karen Baldry so when you first get them - you should rinse them and go through them with water and fan them out. So any loose bristles come out for the first time. I have never had shedding issues. As for the separation - that can happen with any brush designed like this - they are not packed tight like the Annie brush. So that is too wet that’s causing that. Don’t give up the are great brushes. 😀
Have you used the matte poly topcoat product on black? I want to paint a coffee table and I feel like the top will need a topcoat, but wondering if putting it on dark colors is a concern.
Yes I would not (and fusion doesn't either) recommend it. it can cloud and streak. The fusion is durable on its own, but I understand wanting additional protection - I would recommend the stain and finishing oil in natural - its a great topcoat for black and dark colors.
Thank you for the review! I have a few questions if you don't mind:
1) If this is not a chalk paint, does that mean the finish is not as porous therefore harder to distress it or create vintage looks with it using wax/glazing/washing/blending techniques?
2) Why would I buy fusion if I can just use a good water-based acrylic paint from say, Benjamin Moore or Sherwin Williams? I am wondering what makes Fusion better for furniture painting.
3) Does Fusion require little to no prep similar to what Chalk paints claim?
Thanks so much!
Of course - thank you for watching
1 - this paint does distress easily either wet distress or dry with sanding - it has a matte finish as well like chalk paint
2 - This is a paint intended for furniture and not walls (although can be used for them if you wanted). It has a built in top coat , yet having a matte finish. It is also no VOC product and more boutique type color selection. Sherwin Williams trim enamel is a good paint an poly in one, I would stay away from using any type of household latex paint on furniture - for adhesion reasons.
3 - Here is the thing with no prep - there is no such thing - I have a video on here about it. If you were to just apply your paint to non cleaned, wiped down and sometimes scuffed piece - you may have adhesion issues at the very least - all paints require some sort of prep - some more than others. Just the oils from our hands over the years or furniture cleaners need to be wiped clean in order to prep the piece and have a beautiful long lasting finish. The key to a great finish is the right prep. sometimes less than others of course - depending on your piece.
Hope that helps!
@@BorninaBarnBoutique Thank you so much! In your opinion, how does it comparer to Annie Sloan in terms of end results and ease of use? Thank you again!
purplerain409 of course! Honestly other than the matte finish they are pretty different. Annie blends well, dries quick and sands nicely. Some people say fusion is challenging to work with and brushstrokes are an issue - I haven’t had that experience myself. Fusion has a top coat built in, dries matte and gives a nice durable finish on its own.
I would very much appreciate your help with advising me on what paint to use for kitchen cabinets. My husband is a huge fan of big box stores and I’m open to other options. I don’t want to use chalk style paint so I am hopeful that you can help me😄. Thank- you in advance!!!
Shelley Finet so my personal choice would be General Finishes. I wouldn’t paint with household paint (like you would get at the big box stores - they are not made for cabinets/wood). I’m not a fan of the the furniture paint line that they do sell or the cabinet transformation kits - it’s not easy to work with. This is a big project and if your new to painting this type of project you want the easiest/good quality products to work with. They have a product called brushable white enamel or their milk paint that is self leveling and self sealing. If you need more assistance - I do offer virtual lessons that would help you in more detail getting started with your project and making it a successful one - from what you will need, how to prep properly (which is key with kitchen cabinets), product list, the process from start to finish, etc.
Born in a Barn Boutique You are So kind to respond!!! I have learned So much from your video’s- they have been Super helpful!!! You do a Fabulous job with explanations!!! I just purchased Java gel stain for my kitchen table after I saw your video- I will tackle that soon. Again Thank- you 😄. I am so happy that I found your channel!!!
What would you recommend putting over top of the coal black fusion paint that I'm refinishing some chairs with? I wasn't going to seal them but they will be in our main dining space.
Kristina Sara I would for sure especially with coal black - it marks up really easy (fingerprints, wipe marks, etc). I would use the Stain and finishing oil in natural if your brushing on its your best choice.
@@BorninaBarnBoutique Thanks for the quick reply, heading out to pick some up now! How long do you wait before using the oil after painting with the coal black?
Kristina Sara you bet! It’s been a while since I have used it over paint - I believe a few hours - I always wait until next day to topcoat - being cautious!
so.. fusion and General Finishes.. how do you decide which to use on which project?? They both look like great paints
itsmeamanda01 sometimes it depends on what the client wants. If I’m brushing or spraying (GF sprays gorgeous) and what look I’m going for - Fusion is more matte and GF is more sarin finish😄
Have you ever put a primer like Kilts on a piece that you’re going to paint white to prevent yellowing? In other videos I noticed they recommend sanding the piece lightly before adding the paint do you do this process
Marilyn gilroy I use primer all the time, I don’t use Kilz. There are better primers for furniture out there. Zinnser makes several, general finishes, etc. different jobs call for different primers. They prevent bleed through, yellowing on whites and help with adhesion. Sounds like a video!
@@BorninaBarnBoutique thank Your videos are the best I have seen.
I have not used the fusion paint yet but I think I will be for my newest an old wooden rolling tea cart its really ugly!If I want too do 2 colors a white base with azure in a cross hatched design and maybe a lace stencil design around the edge..my questions are is this possible with fusion paint and can I use painters tape too make the lines then pull off after the second coat and it wont pull off the white?
I don't do much wood working ...YET,but i want to
Robin Burch you will love it. you can - you need to let it dry down for a few days before taping just to be safe, also I would use frog tape for delicate surfaces as your best bet
How does this paint work on laminate? Primer first? Do you have any experience with Annie Sloan paint? Great video.
kimberly barr so prep well and then use their ultra grip and top coat and you will have success. I have done a few that were laminate and Formica tips without issue. I do - Annie was the first paint I ever used. I still use today but more for blending projects (the new formula is a bit thicker and I water it down when working with it). Thank you so much for watching!
I have a vinyl upholstered chair that I want to paint. The vinyl is in excellent condition but the color does not work for my home. Do you think Fusion is the best product for my chair project?
Josie Noyola so I personally have not painted vinyl with Fusion - I hear if you wax it that will help. But I would try heirloom traditions paint - they say this can be put on vinyl, leather, etc. check that one out.
Great video, but i'm curious what do you use to clean the brush after the paint or if you use ultra grip priming? Just hot water and leave in water till next use? Do you use a roller of any type ever, micro fiber generics?
I primarily spray now, but I clean brushes when I am done with the job, not in between coats and if I am switching products I always clean (say from ultra grip to paint). My cling on brushes when I am using frequently, yes I wash and then keep the tips suspended in water (they recommend this), if I am not using as much I will store dry hanging upside down to preserve the bristle brush shape. I do not roll, I have tried once and didn't care for it, but I know many that do and love it, its just not my thing
@@BorninaBarnBoutique Ah ok, what are you using to spray these days? So i guess just plain water should do the trick on cleaning in between. Have you ever used Bin on a cabinet as a primer for dark oaks? Im unsure if i should apply ultra grip after the Bin or not, im guessing not.
@@markm75 I use a Fuji Q4. Yes that and some brush cleaner or dawn soap. I use several primers - BIN cover stain, zinsser shellac, etc. only use ultra grip when your concerned about adhesion (laminate or super slick surfaces).
Hello! Thank you for this video. I just found this paint & noticed you did a review. You helped me in my research about 1.5 years ago. I painted my kitchen cabinets using Heirloom Traditions Paint. While I am super happy with the overall outcome, I found that there was a learning curve for me on HTP. How would you compare this Fusion paint to HTP?
Hi. Your quite welcome. To be honest there are learning curves with most products - I love fusion - it is one of my top paints - it dries matte, brushes and sprays beautifully, has a top coat built in (super durable), it’s a thinner consistency than heirloom. Coverage is great like heirloom. Great great paint line
@@BorninaBarnBoutique thank you for the quick response! I’ll definitely be doing some more research into it. I have another huge project & I was nervous about the paint this time around. Thank you for sharing & all your reviews. ❤️
How do you decide if you need to topcoat? I’m painting a dresser and unsure if I need to topcoat it?
It depends - sometimes it’s a look - I want more sheen. Most of my work is client work, so it’s up to the client to decide what they want. I also always topcoat high use pieces. Fusion doesn’t need a topcoat since it has one built in, so it’s a just a personal choice if you want more protection
I’ve used General Finishes Milk paint for about 7 different furniture projects, but haven’t tried Fusion yet.. I would love to know how you feel Fusion is similar/different to GF MP.
So I use them both. GF more so but I like them both. They are different in the way they apply, I haven't had this experience myself, but a lot of people say they have issues with brushstrokes and Fusion. It dries matte, where GF has a low lustre sheen. GF is self sealing, Fusion has a topcoat built in. Their odors are about the same, their consistency is about the same same. Fusion has more of a color selection, Both spray very well. Both sand very nicely. So major differences - the finish, the brush application (I think GF is smoother application and self levels better). Hope this helps!
Born in a Barn Boutique - that really helps! Thank you so much!
Rebecca Ackroyd of course - I’m glad it was helpful! Thank you for watching! 😀
What is the name of the brushes you use -- and where might I find them online?
I like cling on brushes! You can find some of the sizes in amazon and the full set at Wise owl paint.com
Should you use a primer on a shinier finish?
So I use a degreaser/deglosser cleaner (tsp substitute), I would scuff sand and if your concerned about adhesion you can you Fusion Ultra Grip
Which top coat keeps the sheen of the paint the same?
A matte topcoat - Fusion is a matte finish paint. Keep in mind matte topcoat is not as durable as any of the higher sheens - fusion has a built in topcoat anyway, so on it's own its plenty durable. Just a note - matte is less wipeable, then one with a sheen.
Is fusion mineral paint tuff enough for a bathroom vanity that is used everyday?
Once cured it is pretty durable, but for high traffic areas I would suggest top coating for added extra protection and wipe ability 😀
@@BorninaBarnBoutique thank you!
I have a peeling headboard and would like to know how to paint and with what
In order to have a successful end result - you will want to completely remove all peeling paint. You can strip or sand. Then clean, prime and paint.
Beautiful video. I do not want to use wax at all. Would you say that two coats of the mineral paint would work well with a vanity in the bathroom.
Sherry Johnston Hi Sherry welcome to my channel - thank you for subscribing! So normally I would say with this line you don’t need to seal - BUT because it will be in a bathroom I would recommend - you don’t have to wax and for a bath I wouldn’t recommend anyway- Fusion makes great topcoats that are easy to use - you can use their wipe on poly which I really like or they have a hemp oil as well. You don’t have to stick to the same line - you can also go with General Finishes High Performance Top Coat - which is a great top coat as well
@@BorninaBarnBoutique thank you for your input.
Can I use the paint on a lampshade.
Yes - I haven’t done it - but I belong to many paint forums and I read all the time people do!
Please adjust your volume. I have it all the way up and can barely hear you.' Thank you
Yes I understand in some of my older videos the volume wasn’t great. Old camera and too far away with no mic! I have adjusted this in my newer videos! Thanks
How well does it work on a spayer?
Awesome! One of my favorite paints to spray, comes out beautifully - I dilute 10-25% depending on the consistency of the color I am using with distilled water.
Interesting! Thank you!
@@ericarsan3 Absolutely
Why is it called “mineral” paint?
Janis Rice this is what the company started about their paint - Fusion™ is a 100% acrylic, water-based paint. The “mineral” in Fusion™ Mineral Paint refers to the pigments used which are harvested from the earth. ... Once cured, a surface painted with Fusion™ is both water and stain proof. No primer or top coat is required, making it more of a one-step kind of paint.
What color did you use?
Hi. I say in my videos always what colors I use - you just have missed it when I was getting started - it is Ash. 😀
@@BorninaBarnBoutique I missed it. How much lighter than black is it! Does it look more soft black vs gray?
Thanks much❤️
For sure softer - if you go to my website you can view in my gallery - I have all names of paints I used on pieces if you click on it - www.borninabarnboutique. Net
I really love your video!!! Not meaning to be rude, but so many other videos go into a bunch of talk that has nothing to do with the subject, talking to the dog, talking to people who are signing on, etc. When they respond to people just joining, it’s every few seconds and I just find it very annoying! I just want the straight talk!
DianaMarie thank you! I understand what your saying - I try to “stick to the script” but still let my personality show 😀
Si se ve en el video que esta lleno de brochazos. Es horrible!!!