Wow... Josh... A long wait... Finally! No one explains this topic such clear/detail as you 😃👏 Appreciate! ** How to assign: 1» EQ Parameters 2» DIM (D) on Master Track 3» Other Plug-in's Parameters
I have had my Novation Launchkey for 6 months and your video was the first one that actually walked me through the process. Thank you very much! Subbed!
I'm embarrassed to say its taken me about ten years to figure this out, being totally un-techie, watching this just now, hey presto it works, thank you so much!
Thank you - very helpful for the "basic" side of MIDI controlling that I still haven't got my head round till now despite having used Logic Pro for 12 years! Taking the time to watch your video made it a whole lot clearer.
Excellent. I just set up a Novation Launchkey 49 and used the HUI surface controllers in Logic's midi setup menu.. Most functions worked out the box, but this will help get the other buttons programmed and fine tune the functions. Thanks chap!
Thank you so much! This seem to be one of the best videos that wonderfully explains in detail how to set up control surface in "learn mode". I recently purchased a Korg nanoKontrol2, and struggling to get a decent source to set it up properly to control my Logic tracks. This video comes as a saviour for me, and am pretty hopeful of being able to set it up properly using this video as my guide. Thanks once more!
That was amazing. I tried setting it up before from watching another youtube video. They never explained everything in detail like this. It was always messing up. Now i know why. Thanks for making this video.
Finally set up my Launchkey 25. I actually found a used one on Amazon or Facebook Marketplace or something. I needed a dedicated, backpack-sized midi keyboard and actually found this video right after you dropped it. Almost got the MPK, but I figured I'd get the tutorial guy's controller lol. Thanks a bunch!
This was the best, was able to follow along setting up my Alesis VI25 Midi controller. I would also liked to also see Vertical toggling Zoom In/Out and Horizontal Toggling Zoom In/Out
Lovely video. I have had Novation launch key for a few years now and should have checked this video long back. But this is an eye opener in terms of how to actually use the Launch key. Thanks mate.
You are the best! I always end up checking your videos no matter where I try to find a tutorial. In the end, you have done the one I was looking for, simply and effective. Thank youuuu
thank you thank you thank you!!!! I think of myself as technically knowledgable and usually figure things out BUT being a newbie with logic and getting a Akai mpk 225 midi thought it would be easy peazey tp just plug the controller into my Mac and sail away. the module has a hot key for logic but did nothing..... just started reading Logic Pro from David nahmani and maybe my answers were somewhere in one of his chapters....but YOU just made this very, very easy....THANK YOU !!!
You wonderful Rascal. God love you for these videos. You are doing a great job with your content and I hope that you grow much more! The detail that you get into it…. It’s better than any other videos of it’s style for sure. Learning everything I need to know about making music and it helps a lot!
This we so super helpful thanks! I have an old M-audio Keystation Pro 88 I was thinking was needing to be retired but now it's controlling logic 10.5 for me. Nice one!
Fantastic video instructions. Would be great to learn same by using a LaunchControl XL with the individual channel strips. Can't figure out how to set all of that up.
PLEASE ANSWER THIS QUESTION MEISTRO. I've tried doing something similar with Blueboard (midi foot controller) but don't know how to call up the assignments again. it doesnt' seem to work for me.
Hi Josh, thank you so much for this. This video really helped me setup my MIDI controller, I would have otherwise remained perplexed for a long time. Thanks again!
5:26 Dawg you have no idea how pissed i am, but simultaneously relieved i watched all of this. I thought something was wrong with Logic, or my AKAI MPK Mini. Let me explain.. I have my FaderPort V.2, I wanted it to do what it does while the MPK's knobs would control Logic's compressor. I tried the Smart controls so many times, because when I would switch between tracks I thought Logic was forgetting the parameters.. but no No bro, do you know what it was? My very dumb ass not realizing that midi controllers are waiting for you to turn the controllers knob to the softwares knobs value to make edits.. I learned this a long time ago and should know better!!! I was gonna get Bomes Midi Translator Pro because I thought I was doing something wrong. Thank you MusicTechHelpGuy. You made me realize I was doing everything correct this whole time 😭😭😭
Brilliant video! Thanks. One question - when I map the AUX SEND 1 to a knob it keeps bringing up the Controller Assignments window. Any idea how to stop that?
I'm still waiting for the video on setting up a control surface or larger midi keyboard/control surface like the mpk249 or nektar impact 61! I've come back to this video 10x for different things, normally finding a way to figure it out from here!
Is it possible to store different midi comtroller settings like one for a synth and one for mixing… if you have a video on that that would be helpful. Great video and thanks for the detail, love your channel.
Really helpful - thanks. It would be great to see how you deal with using multiple controllers to control multiple controls. For example using the set up in this video for general daw controls, and then another control surface to control synth controls (or perhaps separate CC's like expression etc). I struggle with encountering lots of conflicts when attempting to do this and currently experimenting with midi channels. How do you do it?
Hey man, did you find a solution? I have a midi controller assigned to multiple channels so I can automate more than one at the same time, but it only seems that I can automate the selected channel!! Is there a setting?
@@NickQuinn1986 unfortunately it didn't work so well on my set up. I have a platform m+ that proved tricky to program. I ended up using BOME midi translator to get the controls I wanted - highly recommended if you're struggling.
Great vid as always! But like you said I also have a dedicated control surface at the studio and recently purchased a NI M32 for home use... So I set up the M32 knobs to be used for the Smart Controls but...when I get back to the studio and use the surface I have there, which is a Novation Zero SLmkii the the knobs I had controlling the Smart controls no longer work. In the Controller Assignment window both controllers appear in the drop down... I can't figure this out. If only you could save Controller Assignments on a per project basis or is there something I'm missing? Thoughts?
I recently purchased a MacBook Pro with M2 chip. Everything seems to work fine except when I connect my Yamaha Modx and Oxygen 49 for midi zoning, I experience a midi note hanging. I used to have Launchkey 61. Same thing happened with that as well. I’ve changed the entire keyboard rig including cables and connectors even purchased Apple USB c to USB convertors. Nothings seems to work fine. This happens when I play VST plug-ins as well. Updated to latest os, factory reset app, cleaned it with app cleaner. Nothing works. Called Apple Support and did as they instructed but still the issue is same. I saw that I’m not the only one with the issue.
Hey MTHG! ive been following along with your videos for some time. Honestly, your teaching methods, explanations and executions are of superior assistance to me! I am an artist / producer from Toronto, my name is Vyvyd 😁 Question : Streamdeck + / Makie Controls I currently own a streamdeck + (with knobs) and I have used it for about a month for Logic Pro and it has proven to be a staple in my studio. Within Elgatos app, there is a plug in i currently use and it is for "Mackie" controls. Currently its usefullness seems to be limited to - scrubbing of the time line, zooming, track selection and faders. 1 is there a way to have more in depth controls (eq control, vst control, or any other workflow processes that may speed up efficiency) 2 If so, how would i go about committing to creating the controls / mackies with Logic and Elgato's App in order to execute this? Thank you for all your hard work!!!!!!!!!
Is there a way to save templates for midi mapping? I'd love it if I could set up for a template for mixing, and another template for orchestral composing in Logic
Is that not possible? Cause I’d love to know too. Aaron C above was also asking about opening and using EQ with the same controller. I wonder if logic remote or something like touch OSC could work.
you could teach me how to halve a grapefruit ...carve out each segment ....powder sugar it .. and serve it been looking for this info for awhile now best 17 minutes for this Logic Audio setup look no further thanks for making the precise video one misplaced tick can ruin the setup so glad you were thorough
Good stuff. Thank you. Can one save multiple custom assignments for multiple controllers and use them at the same time? Like what if I want to use an older controller for just synth parameters and a newer controller for transport control and mixing.
Thank You for your expertise in how to Setup my Mixer as a midi Controller. however, I have not tried to do that with the Presonus 32s iii series digital mixing board yet. I am going to see if it works and then get back to you to give you an updated results on my discovery with this new mixer I recently purchased. However, if you have any knowledge about how to setup my presonus mixer to Logic Pro X pls. do not hesitate to share how to setup the board bcuz the manual to the board does not explain how to actually setup the baord with all Daws. Essentually it is compatible with Presonus Studi One 5 Professional lol but I just like using Logic Pro X better.
Wondering if/how/where this wouldd be saved to maintain settings between Logic and a controller, to be abler to be recalled between projects…or does it have to be done each time? Also, am I right to assume an 8 fader controller can be set up across 8 different tracks? Really excellent explanation, though. Appreciate it. Many thanks 🙏
You are the man! It made my life much easier! I use a korg nanokontrol2 and i was able to set it just how i needed. Do you know it there is a way to asign knobs to control eq and compresor values? Cheers!
This is great. What if I want one knob to effect 2 automation or midi parameters at once. I.E. I have a narrow band EQ on a drum bus, and I want to turn a knob and have a LP filter work it’s way up from 600hz and a HP filter work it’s way down from 400hz to open up the sound. Both at the same time controlled by one knob.
Awesome video! I have a question, though. Since I can't afford the big Mackie mix controller and only have a cheap Akai MPK Mini with 8 dials on it, is there a way to set it up so that I can re-use those 8 dials based on the situation? For example, if I set them up like you did in the video to control the fader, pan, sends, etc. Can I also set those same dials up to control all the EQ dials in an SSL EQ plugin (Waves CLA Mixhub) when it's open then go back to controlling the channel strip when the plugin is closed?
Hi, after digging around for a day I have found a way to do this. You'll do this by creating a zone, then creating different modes inside the zone, you'll then assign the CC's inside the modes and switching between the modes will let you perform what you want. Here's the thing tho, for this to work you must NOT have anything learned in the 'NO ZONE', this is basically because 'NO ZONE' tells logic to move the CC no matter what, which is exactly what we don't want. So the first step is actually to remove anything that is in the 'NO ZONE'. Here's an example to further clarify: 1. Open up the Controller Assignment Window and if necessary, delete the learned controls from 'No Zone' --- 2. Create a new zone and name it 'Fader'. ---- 3. Inside zone 'Fader' create two modes and name them 'Channel Strip' and 'Cutoff'. ---- 4. Inside mode 'Channel Strip' assign the volume to be controlled by your fader as shown in the video. --- 5. Inside mode 'Cutoff' assign the same fader used in step 4 to control the cutoff of a filter. --- If you've done it correctly you will no longer get a popup telling the controller has already been assigned, and now simply switching between the two modes will let you use the fader to control two different things. Hope that helps!!!
@@robotmeadows the problem is, when you apply something in the new created mode, (channel strip/cutoff), in the new zone (Fader), it auto adds it to the NO ZONE. And if you delete from the NO ZONE, it deletes the others. Any help please?
Nice tutorial 🥇, another thing I want to, is to change the sound used when I tap a pad button, I mean I want to assign a track for every single pad button, in that way i can change the sound used tapping them. How can I do that?
thank you for sharing. Two more questions: is it possible to assign a rotary knob to forwind/rewind (when the knob is clockwise/counterclockwise turned)? Is it possible to assign a rotary knob to adjust the value of any software plugin knob where the cursor is floating on (by default, the mouse mid position sweep is used for this purpose)?
Nice and neat tutorial. Is there a way to save the assignments settings or do we REALLY have to do the whole process again everytime we unplug our MIDI controller?Does it work if we save the project as a template?
Amazing and Perfect as ALWAYSSS. Thank you for taking the time and effort to put this together!!! At the end of the video you were talking about setting up your MIDI controller as a DAW composition tool as well. How different would that be? and would you use the same method of learning assignments through key commands?
Wow... Josh... A long wait... Finally! No one explains this topic such clear/detail as you 😃👏 Appreciate!
** How to assign:
1» EQ Parameters
2» DIM (D) on Master Track
3» Other Plug-in's Parameters
Josh, you took 17 minutes to set this up... and I appreciate every minute of it! Thank you!
17 perfectly invested minutes. 😉
WORD. I feel this way about all of your videos. You are helping me realize a dream of mine. TY!
I have had my Novation Launchkey for 6 months and your video was the first one that actually walked me through the process. Thank you very much! Subbed!
I gave my little midi keyboard a big hug after watching this! Thank you so much
I've watched several videos on this and couldnt get it. Never underestimate what a quality video can do for learning! Thanks!!
I'm embarrassed to say its taken me about ten years to figure this out, being totally un-techie, watching this just now, hey presto it works, thank you so much!
Thank you - very helpful for the "basic" side of MIDI controlling that I still haven't got my head round till now despite having used Logic Pro for 12 years! Taking the time to watch your video made it a whole lot clearer.
yeah I have to hand it to the fgot cause its rare they can focus
Excellent. I just set up a Novation Launchkey 49 and used the HUI surface controllers in Logic's midi setup menu.. Most functions worked out the box, but this will help get the other buttons programmed and fine tune the functions. Thanks chap!
Thank you so much! This seem to be one of the best videos that wonderfully explains in detail how to set up control surface in "learn mode". I recently purchased a Korg nanoKontrol2, and struggling to get a decent source to set it up properly to control my Logic tracks. This video comes as a saviour for me, and am pretty hopeful of being able to set it up properly using this video as my guide. Thanks once more!
After a day of head wrecking minimal info from akai and logic you've made the best explanation I could find. Thank you!
I love my launchkey 25 and now even more. I binge on all your videos, you do excellent work. Thanks so much. Your channel is better than Netflix 😊
That was amazing. I tried setting it up before from watching another youtube video. They never explained everything in detail like this. It was always messing up. Now i know why. Thanks for making this video.
Thanks for this video! You’re the only person I’ve found that explained this. I can finally finish my MIDI Designer Pro template 😁
The best 17 minutes I have spent in a while, one again thanks man, you made my day!
If you want to directly set the control (and not catching up as mentioned in 5:35) -> Check the "Local Feedback (Fader/Knob)" option
Under which menu?
@@kannonprice3521 Controller assignment parameter - under Value - below text feedback (checkbox)
Finally set up my Launchkey 25. I actually found a used one on Amazon or Facebook Marketplace or something. I needed a dedicated, backpack-sized midi keyboard and actually found this video right after you dropped it.
Almost got the MPK, but I figured I'd get the tutorial guy's controller lol. Thanks a bunch!
This was the best, was able to follow along setting up my Alesis VI25 Midi controller. I would also liked to also see Vertical toggling Zoom In/Out and Horizontal Toggling Zoom In/Out
Fantastic video, as always; you make a complicated process so easy to understand and follow. Much appreciated
Thank you so much! For someone just starting to use Logic for the first time, your videos are amazing!
short n crisp , thank you i was struggling to setup my new oxygen mini pro with logic, its all sorted out now 🙂
Just recently purchased the Launchkey MK3. As always you're my go to channel for information on LPX. Thanks!
Lovely video. I have had Novation launch key for a few years now and should have checked this video long back. But this is an eye opener in terms of how to actually use the Launch key. Thanks mate.
You are the best! I always end up checking your videos no matter where I try to find a tutorial. In the end, you have done the one I was looking for, simply and effective. Thank youuuu
Best video I've found for Logic X control assignments - thank you!
Very interesting indeed... might need to watch it more than once for all the info to sink in!
thank you thank you thank you!!!! I think of myself as technically knowledgable and usually figure things out BUT being a newbie with logic and getting a Akai mpk 225 midi thought it would be easy peazey tp just plug the controller into my Mac and sail away. the module has a hot key for logic but did nothing..... just started reading Logic Pro from David nahmani and maybe my answers were somewhere in one of his chapters....but YOU just made this very, very easy....THANK YOU !!!
You wonderful Rascal. God love you for these videos. You are doing a great job with your content and I hope that you grow much more! The detail that you get into it…. It’s better than any other videos of it’s style for sure. Learning everything I need to know about making music and it helps a lot!
pretty cool. I figured how to do it in the new version thanks to your video
I was lost on this topic until I found this video. Thank you!
Great video. I always wondered why the record and play buttons on my midi controller didn't work with Logic. Thank you for this!
well: truly a great explanation on how to set MIDI device in functional operation Best Regards
This we so super helpful thanks! I have an old M-audio Keystation Pro 88 I was thinking was needing to be retired but now it's controlling logic 10.5 for me. Nice one!
Fantastic video instructions. Would be great to learn same by using a LaunchControl XL with the individual channel strips. Can't figure out how to set all of that up.
This video came at the perfect time. Thank you!
Same here! Thank you. Another excellent instalment ✅👍
Thanks MusicTechHelpGuy! Made my workflow way more tactile! 🙏🏼
Great Video, clear and on Point. Forget about the 17 Minutes, you've got over 127k Views.
I would say this is the first tutorial that helped.
Thanks for taking the time to put together - it really was 17 mins of my life well spent :-)
Dude this vid is perfect Josh! Great job man! You’ve helped me so much! Love your videos! ❤️🤘
Wonderful, thank you so much, perfectly explained, I've just used this to map my LPD8 to 10.5 to make it a live looping tool! It's so much fun!
Great, informative upload Josh. One question. Do the parameters you set, remain set, when you close Logic and unplug the midi device?
PLEASE ANSWER THIS QUESTION MEISTRO. I've tried doing something similar with Blueboard (midi foot controller) but don't know how to call up the assignments again. it doesnt' seem to work for me.
This was great!!! I spent two hours looking for explanations and you showed me in 17 minutes!
you are the best Teacher i ever seen.
Excellent! Thank you. How do I save this settings so not having to repeat the process every time ?
Hi Josh, thank you so much for this. This video really helped me setup my MIDI controller, I would have otherwise remained perplexed for a long time. Thanks again!
Thanks a million! I never would have figured it out without you!!!
I just got a novation launchkey 61, and this video was super helpful!
You truly are a Logic Pro genius!!
5:26
Dawg you have no idea how pissed i am, but simultaneously relieved i watched all of this.
I thought something was wrong with Logic, or my AKAI MPK Mini. Let me explain..
I have my FaderPort V.2, I wanted it to do what it does while the MPK's knobs would control Logic's compressor. I tried the Smart controls so many times, because when I would switch between tracks I thought Logic was forgetting the parameters.. but no
No bro, do you know what it was?
My very dumb ass not realizing that midi controllers are waiting for you to turn the controllers knob to the softwares knobs value to make edits.. I learned this a long time ago and should know better!!! I was gonna get Bomes Midi Translator Pro because I thought I was doing something wrong. Thank you MusicTechHelpGuy. You made me realize I was doing everything correct this whole time 😭😭😭
Brilliant video! Thanks. One question - when I map the AUX SEND 1 to a knob it keeps bringing up the Controller Assignments window. Any idea how to stop that?
Full of knowledge... This 17 minute. Thank you sir.... 🙏
Absolute beast of a tutorial, Deeply appreciated, thanks !
This is excellent information! Thanks so much for sharing! I really appreciate your thoroughness and clarity. :-)
I'm still waiting for the video on setting up a control surface or larger midi keyboard/control surface like the mpk249 or nektar impact 61!
I've come back to this video 10x for different things, normally finding a way to figure it out from here!
hi! automation quick access actually controls whatever parameter you have displayed in the automation lane for the currently selected track
Honestly this is the best video on youtube lol great work man
Very helpful video and excellent delivery style 💯
Thank you for all you do to help us.
Thank-you so much for such a great video. A lot of help received
Is it possible to store different midi comtroller settings like one for a synth and one for mixing… if you have a video on that that would be helpful. Great video and thanks for the detail, love your channel.
Your lessons is amazing
Really helpful - thanks. It would be great to see how you deal with using multiple controllers to control multiple controls. For example using the set up in this video for general daw controls, and then another control surface to control synth controls (or perhaps separate CC's like expression etc). I struggle with encountering lots of conflicts when attempting to do this and currently experimenting with midi channels. How do you do it?
Hey man, did you find a solution? I have a midi controller assigned to multiple channels so I can automate more than one at the same time, but it only seems that I can automate the selected channel!! Is there a setting?
@@NickQuinn1986 unfortunately it didn't work so well on my set up. I have a platform m+ that proved tricky to program. I ended up using BOME midi translator to get the controls I wanted - highly recommended if you're struggling.
@@NickQuinn1986 hey did you find a solution? spent hours looking for one
2024 and I needed this
Great vid as always!
But like you said I also have a dedicated control surface at the studio and recently purchased a NI M32 for home use... So I set up the M32 knobs to be used for the Smart Controls but...when I get back to the studio and use the surface I have there, which is a Novation Zero SLmkii the the knobs I had controlling the Smart controls no longer work. In the Controller Assignment window both controllers appear in the drop down... I can't figure this out. If only you could save Controller Assignments on a per project basis or is there something I'm missing? Thoughts?
I SEARCHED FAR AND WIDE FOR THIS. YOU EARNED THE SUBSCRIPTION BUD
I recently purchased a MacBook Pro with M2 chip. Everything seems to work fine except when I connect my Yamaha Modx and Oxygen 49 for midi zoning, I experience a midi note hanging. I used to have Launchkey 61. Same thing happened with that as well.
I’ve changed the entire keyboard rig including cables and connectors even purchased Apple USB c to USB convertors. Nothings seems to work fine. This happens when I play VST plug-ins as well. Updated to latest os, factory reset app, cleaned it with app cleaner. Nothing works. Called Apple Support and did as they instructed but still the issue is same. I saw that I’m not the only one with the issue.
This was on point!! Thanks for taking the time to do this video!
This video really helped me out of a jam.
Hey MTHG! ive been following along with your videos for some time. Honestly, your teaching methods, explanations and executions are of superior assistance to me!
I am an artist / producer from Toronto, my name is Vyvyd 😁
Question : Streamdeck + / Makie Controls
I currently own a streamdeck + (with knobs) and I have used it for about a month for Logic Pro and it has proven to be a staple in my studio.
Within Elgatos app, there is a plug in i currently use and it is for "Mackie" controls.
Currently its usefullness seems to be limited to - scrubbing of the time line, zooming, track selection and faders.
1 is there a way to have more in depth controls (eq control, vst control, or any other workflow processes that may speed up efficiency)
2 If so, how would i go about committing to creating the controls / mackies with Logic and Elgato's App in order to execute this?
Thank you for all your hard work!!!!!!!!!
Is there a way to save templates for midi mapping? I'd love it if I could set up for a template for mixing, and another template for orchestral composing in Logic
Is that not possible? Cause I’d love to know too. Aaron C above was also asking about opening and using EQ with the same controller. I wonder if logic remote or something like touch OSC could work.
I think that's called Zones. I haven't figured out how to do it yet.
you could teach me how to halve a grapefruit ...carve out each segment ....powder sugar it .. and serve it
been looking for this info for awhile now best 17 minutes for this Logic Audio setup look no further
thanks for making the precise video one misplaced tick can ruin the setup so glad you were thorough
Good stuff. Thank you.
Can one save multiple custom assignments for multiple controllers and use them at the same time? Like what if I want to use an older controller for just synth parameters and a newer controller for transport control and mixing.
Thank You for your expertise in how to Setup my Mixer as a midi Controller. however, I have not tried to do that with the Presonus 32s iii series digital mixing board yet. I am going to see if it works and then get back to you to give you an updated results on my discovery with this new mixer I recently purchased. However, if you have any knowledge about how to setup my presonus mixer to Logic Pro X pls. do not hesitate to share how to setup the board bcuz the manual to the board does not explain how to actually setup the baord with all Daws. Essentually it is compatible with Presonus Studi One 5 Professional lol but I just like using Logic Pro X better.
Fantastic - I have an old 88 note controller sitting around
Sir Thank you so much for learn this mapping and controlling.
You and Logic are best.
Thanks for uploading this! Really appreciate the helpful and clear instructions! Great content!
Wondering if/how/where this wouldd be saved to maintain settings between Logic and a controller, to be abler to be recalled between projects…or does it have to be done each time?
Also, am I right to assume an 8 fader controller can be set up across 8 different tracks?
Really excellent explanation, though. Appreciate it. Many thanks 🙏
You are the man! It made my life much easier! I use a korg nanokontrol2 and i was able to set it just how i needed. Do you know it there is a way to asign knobs to control eq and compresor values?
Cheers!
This is great. What if I want one knob to effect 2 automation or midi parameters at once. I.E. I have a narrow band EQ on a drum bus, and I want to turn a knob and have a LP filter work it’s way up from 600hz and a HP filter work it’s way down from 400hz to open up the sound. Both at the same time controlled by one knob.
Worth every minute. Thanks
Thank you 🙏 for your awesome videos as always full of great tips. Have a awesome holiday season stay safe
Awesome video! I have a question, though. Since I can't afford the big Mackie mix controller and only have a cheap Akai MPK Mini with 8 dials on it, is there a way to set it up so that I can re-use those 8 dials based on the situation? For example, if I set them up like you did in the video to control the fader, pan, sends, etc. Can I also set those same dials up to control all the EQ dials in an SSL EQ plugin (Waves CLA Mixhub) when it's open then go back to controlling the channel strip when the plugin is closed?
Also want to know this.
Hi, after digging around for a day I have found a way to do this. You'll do this by creating a zone, then creating different modes inside the zone, you'll then assign the CC's inside the modes and switching between the modes will let you perform what you want. Here's the thing tho, for this to work you must NOT have anything learned in the 'NO ZONE', this is basically because 'NO ZONE' tells logic to move the CC no matter what, which is exactly what we don't want. So the first step is actually to remove anything that is in the 'NO ZONE'. Here's an example to further clarify: 1. Open up the Controller Assignment Window and if necessary, delete the learned controls from 'No Zone' --- 2. Create a new zone and name it 'Fader'. ---- 3. Inside zone 'Fader' create two modes and name them 'Channel Strip' and 'Cutoff'. ---- 4. Inside mode 'Channel Strip' assign the volume to be controlled by your fader as shown in the video. --- 5. Inside mode 'Cutoff' assign the same fader used in step 4 to control the cutoff of a filter. --- If you've done it correctly you will no longer get a popup telling the controller has already been assigned, and now simply switching between the two modes will let you use the fader to control two different things. Hope that helps!!!
@@robotmeadows the problem is, when you apply something in the new created mode, (channel strip/cutoff), in the new zone (Fader), it auto adds it to the NO ZONE. And if you delete from the NO ZONE, it deletes the others. Any help please?
Superb video....concise to the point and clear instruction ♥️
Great explanation….simple and useful! Thanks so much.
reallllly very much informative video as usual...tanxxXxx a ton...!!
Nice tutorial 🥇, another thing I want to, is to change the sound used when I tap a pad button, I mean I want to assign a track for every single pad button, in that way i can change the sound used tapping them. How can I do that?
Cool! Now I'm interested in how to use it for using different plugins!
Great! Really like your tutorials 👍 Easy to understand
This was SUPER helpful, thanks!
thank you so much. really appreciated and needed your help with this.
thank you for sharing. Two more questions: is it possible to assign a rotary knob to forwind/rewind (when the knob is clockwise/counterclockwise turned)? Is it possible to assign a rotary knob to adjust the value of any software plugin knob where the cursor is floating on (by default, the mouse mid position sweep is used for this purpose)?
Nice and neat tutorial. Is there a way to save the assignments settings or do we REALLY have to do the whole process again everytime we unplug our MIDI controller?Does it work if we save the project as a template?
Amazing and Perfect as ALWAYSSS. Thank you for taking the time and effort to put this together!!!
At the end of the video you were talking about setting up your MIDI controller as a DAW composition tool as well.
How different would that be? and would you use the same method of learning assignments through key commands?
for undoing solo button by midi controller you have to keep the buttun a little longer
Simple, efective vídeo. Thanks a lot!
Extremely useful. Thank you.
thank you man you did a great job explaining this things. I learned a lot. thank you!!! and thanks for going slow, respect!!!
Super informative Josh, nice job!