CAN AM DEFENDER LIMITED OIL CHANGE ***EASY WAY*** no cab entry!!!

Поділитися
Вставка
  • Опубліковано 29 лис 2024

КОМЕНТАРІ • 40

  • @MaxsAdventure.
    @MaxsAdventure. 2 роки тому +3

    Thanks for the vid. I only have about 10 hrs on mine but I'm glad to see it can be done without tearing apart the interior.

  • @dekklin5517
    @dekklin5517 Рік тому

    Best Can Am oil change on the tube of you HANDS DOWN!

    • @rotaxrednex
      @rotaxrednex  Рік тому

      We appreciate it! Like subscribe and share please!

  • @maraudermitchelli
    @maraudermitchelli Рік тому +4

    You made an excellent video. I posted a video changing the oil removing the rear firewall panel and I get comments it can be changed easier and they reference your video. If I ever own another defender I may try the tile change your way...although I'm not as young and talented as you. Great job Merry Christmas 😊

  • @Bowhunting247
    @Bowhunting247 6 місяців тому

    Just changed the oil on mine today like this. Was a lot easier than I thought it was gonna be. Took about 15 minutes. I did not take bed off or take cab apart. They did put the oil filter in a pretty stupid spot though in my opinion.

  • @Doug-pu5tf
    @Doug-pu5tf Рік тому

    I did my first oil change this way, but I prefer to remove the access cover in the cab behind the seat to get better access to the oil filter recess as there is a lot of oil accumulation in there and I like to clean it out. Only takes a few minutes and if you need to adjust your valves you also have access to your front cylinder valve cover.

    • @rotaxrednex
      @rotaxrednex  Рік тому +2

      Of course to each their own buddy!

  • @lloydmarche7263
    @lloydmarche7263 Рік тому

    Nice video. I have been looking at buying a defender. Access to service the machine is a plus for me. I currently own a first gen commander which is a pain to service.

  • @kuniver748
    @kuniver748 2 роки тому +1

    Great video I was wondering 🤔. No backseat removal thanks 👍

  • @lonniewilliams7240
    @lonniewilliams7240 Рік тому

    installing u joints in front driveshaft easy way. single seat 22hd 10good videos thanks

  • @bryanzepp1931
    @bryanzepp1931 2 роки тому +1

    Looks like you have quite the stereo a video on that would be awesome if you get a chance

  • @kenpeterson327
    @kenpeterson327 14 днів тому

    when should you do your first oil change? I bought one with 70 miles on it and has not been changed but salesman told me first one at like 100 hours?

  • @linnjensen7469
    @linnjensen7469 10 місяців тому +1

    Polaris has a screw on filter this almost makes me go Polaris , the only difference in this and my older can am is I wouldn't have to take the engine cover off to get the filter out but my old one is definitely easier to get the screws out and replace the filter

  • @markp9779
    @markp9779 6 місяців тому

    very helpful video thanks!

  • @vinny4020
    @vinny4020 Рік тому +1

    How did you reset your maintenance minder light?

  • @skeim5620
    @skeim5620 Рік тому

    How do you like the buggy

  • @keithundefined6453
    @keithundefined6453 10 місяців тому

    Take a min. and remove the air box for more arm room to get in there

  • @jasonpond7866
    @jasonpond7866 8 місяців тому

    Do you change the other fluids?

    • @rotaxrednex
      @rotaxrednex  8 місяців тому

      Yeah we change everything

  • @candyman1967
    @candyman1967 11 місяців тому

    Lube oil filter rubber to prevent dry rot. Explain more please 😂🤦‍♂️

  • @outfitr9703
    @outfitr9703 2 роки тому

    My manual says 2000 miles, no mention of early first change so mine isn't going to get changed till I get 2000 miles on it.

    • @rotaxrednex
      @rotaxrednex  2 роки тому +1

      This on idles more then it drives to each their own!

    • @1911smokinggun
      @1911smokinggun 2 роки тому +1

      200 hour first change

  • @linnjensen7469
    @linnjensen7469 10 місяців тому

    I am looking at a Defender and if I had to take the cab off I would go to Polaris

    • @rotaxrednex
      @rotaxrednex  10 місяців тому +1

      You don’t take the cab off, it’s a panel in the cab that comes off, but the easiest way is to just take off center skid plate it take 10-15 mins now for the whole job that’s how I do it nowadays

  • @candyman1967
    @candyman1967 Рік тому

    Helps prevent dry rot comment 🤦‍♂️

  • @mcm542
    @mcm542 Рік тому

    Looked into this in detail today. This a major design flaw in my opinion. Total deal breaker.