Ich krieg die Bluetooth Verbindung nicht hin. Wie muss ich genau vorgehen zum koppeln? In der Handy auswahl wird das Gerät schon angezeigt, aber die Koppelung wird jedesmal verweigert. Muss an dem G.T.Power noch ein Knopf oder so gedrückt werden?
sehr schönes Video 👍wie ist das mit den Blinken sind die synchron mit den Sound? oder kann man es einstellen - war irgendwie in Vergangenheit ein Problem und hat das System auch Xenon EWfekt und Kurvenlicht?
Freut mich, dass dir mein Video gefällt! Für deine doch schon etwas höheren Ansprüche würde ich dir empfehlen ein paar Euro mehr zu investieren und zum SFR-1 zu greifen www.fechtner-modellbau.de/13753/sfr-1-soundfahrtregler-von-beier.-speziell-fuer-trucks?sPartner=45845 Das GT-Power ist ganz gut und spielt in der Liga der Tamiya MFCs aber wenn es doch mehr können soll würde ich zum SFR-1 greifen. Hoffe ich konnte dir weiterhelfen!
Great video, but I have to confess, my German is not that good. Is it correct that I can run on 3S LiPo and the servo can run directly from the unit? Was is the servo voltage when runnning on 3S LiPo?
Ich krieg die Bluetooth Verbindung nicht hin. Wie muss ich genau vorgehen zum koppeln? In der Handy auswahl wird das Gerät schon angezeigt, aber die Koppelung wird jedesmal verweigert. Muss an dem G.T.Power noch ein Knopf oder so gedrückt werden?
Hi,
wie has du es gemacht, dass du den Motor Start / Stop auf einem Schaltkanal hast ???
sehr schönes Video 👍wie ist das mit den Blinken sind die synchron mit den Sound? oder kann man es einstellen - war irgendwie in Vergangenheit ein Problem und hat das System auch Xenon EWfekt und Kurvenlicht?
Freut mich, dass dir mein Video gefällt! Für deine doch schon etwas höheren Ansprüche würde ich dir empfehlen ein paar Euro mehr zu investieren und zum SFR-1 zu greifen www.fechtner-modellbau.de/13753/sfr-1-soundfahrtregler-von-beier.-speziell-fuer-trucks?sPartner=45845 Das GT-Power ist ganz gut und spielt in der Liga der Tamiya MFCs aber wenn es doch mehr können soll würde ich zum SFR-1 greifen. Hoffe ich konnte dir weiterhelfen!
Great video, but I have to confess, my German is not that good. Is it correct that I can run on 3S LiPo and the servo can run directly from the unit? Was is the servo voltage when runnning on 3S LiPo?
The voltage for LED and servo is managed by the unit and independend of the inpult voltage, hope this helps!
@@RC_ACTION_CHANNEL Thanks alot, that was what I wanted to hear.
what voltage goes out to light? thought to connect som extra light
Hi, in my case it was 6,38 volt - hope this helps! It's always a good idea to check the voltage before connecting any additional lights. 😉
Hallo mein GT Power koppelt nicht mit mein Smartphone Phone
Das Problem habe ich auch mit meinem Handy