AddMultiTurn - 6-corners inserts for high versatility, economy and productivity
Вставка
- Опубліковано 1 жов 2024
- - Front Turning, Back Turning, Profiling,and Face Turning with ONE SINGLE TOOL
- Y-PRISM safe lock design has a rail on the shim and matching slot on the insert for a tight interlocking and secure clamping.
- Innovative geometry for machining with high productivity and process security
AddMultiTurn
tungaloy.com/p...
#Tungaloy
#Cnclathe
#Turning
#Carbonsteel
#CNC
#4K
prime turning by Sandvik
copied from sandvik coromant 😅
Sandvik Coromant Prime turning - the best!!!
prime turning copy...
Why would you only feed the CNMG at .012" and not the same .024"? Because this insert design is bullshit and you have to stack the deck to make it a viable option, that's why.
Well, I see the advantage of adding essentially 2 more tips, and I'm sure that there are some advantages to this insert over others. However I agree with you on the feed 😂 I was like..... I'm doing a feed of .02 on 1045 literally right as I'm typing this, you just slowed it down on the cnmg for the demo 😂😅 but you know, I don't think it's a bad idea. It probably preforms great in certain applications.
SANDVIK IS BEST IN PRIME TURN
比較動画とてもわかりやすいです!
AddMultiTurn、名前からしてすごい工具なのが伝わります!
what programming alterations would be required from running a proven roughing wnmg insert, to your .032r insert? what's the benefit of running the z in reverse? would the insert break otherwise or just more efficient?
We think it will be easier to understand the processing conditions if you look here!
ua-cam.com/video/FWBOeQNgWoA/v-deo.html
Sandvik prime Turn
Copying is easy... 😃😃😃 #primeturning
I agree lol but I bet this is way more economical and probably works better
لا اعرف ما علاقة السرعه يمكن بكل بساطة عدم ضبط المسننات بي نفس السرعة
Fascinating. Multi-directional tool for high feed machining.
Sandvik say hello.
@@kphpromecanica2391 Hei
What are differences between sandvik and tungaloy?
The biggest difference appears to be the fact that the Sandvik insert is only a 3 edge insert since it has relief on the backside, whereas this is 6 sided and has the relief built into the holder. Not to mention the holder for the roughing and finishing insert is identical, whereas the prime turning requires 2 separate holders for the two different insert shapes they offer. I think they are both good solutions, but on a cost per edge basis the Tungaloy probably wins out.
Price🤣🤣
Tungaloy's cost to performance will be significantly better
Type?
Thank you for your comment!
Front Turning, Back Turning, Profiling, and Face Turning with ONE SINGLE TOOL.
Sandvik prime Turn
Turning was never easier by using these excellent turning solutions. Thumbs up!!
This solution is simply stolen from Sandvik Coromant )
Can you send this tool by anywhere? Especially Indian
お疲れ様です。質問があるのですが、送りが上がるということは必然的に今までのチップよりもワークにかかる負荷は上がるのですか?
コメントありがとうございます!
はい、送りをあげると負荷は大きくなります!
今回の後挽き加工は、有効切れ刃長さが長い加工となりますので芯押しを使用した環境での加工を推奨します!
@@TungaloyCorporation 返信ありがとうございます!後挽き加工ではなければ芯押しをしなくても、切り込みを減らすなどして送りを早くすれば今までのチップより高速加工が可能ですか?
もちろん状況にもよりますが、
ISO工具に比べますと高送り傾向はございますし、
コーナー数も6コーナーですので経済的でございます!
@@TungaloyCorporation わかりました!色々とありがとうございます!
Prime turning sandvik ?
Thanks comment!
We are Tungaloy in Japan!
This product is AddMultiTurn.
tungaloy.com/product/turning/addmultiturn/
Good~~
Reverse turning, very neat!
Thank you so much for your compliments!
It means a lot to us to hear you say that!
👏👏👏👏👏👏👏
😊👍⭐️
प्राइस
Thanks for your comment!
They're available from our online store!
tungaloy.com/onlineshop/
👍🏻
😊👍🌟
Amazing
Thank you for your interest!