Check out Flexispot for ergonomic standing desks and chairs. Use the exclusive code "BFYTB" to get $30 off your E7/E7pro/C7 purchase. You can also win a free order during their black friday sale. E7 Standing Desk (USA)： bit.ly/46XZoBe C7 Chair (USA)： bit.ly/3u8n0os E7 Standing Desk (Canada)： bit.ly/3MyYW4q
FreeCAD isn't for beginners, good thing is compared to commercial alternatives is that it will be free and open-source forever, can't say same thing for onshape/fusion or similar alternatives.
I am a beginner and I started with FreedCad. Watched some good tutorial videos. It may be not that intuitive, but it is the only really free CAD software out of that list.
I'm a beginner, drawing only what I need for repairs when original parts are not available. Mostly simple shapes. Sometimes with months in between I have to relearn a lot. Yet I can make simple parts within the hour. With a little video help and the basics you can learn it very fast. I would say no worse than any of the others.
It is worth noting that FreeCAD is actually taking a serious look at UI and UX to make it more intuitive and options the experience more. You've made some valid points though.
Most "free" softwares are burdened with piece of trash humans that "religiously believe" that the way they do things in a UI is how EVERYONE must do things in a UI. Almost every OpenSource/Free product with any decent functionality has this problem. And it's not just a "no UI/UX" person that won't do the work. They BLOCK IT actively. It is absolutely the #1. Blocker for the adoption of most software.
Are they taking a serious look at the fundamental bug that makes it unusable? Say you draw something with a cube, then work on one of the cube’s faces by, say, putting a cylinder on that face, if you change the cube’s dimensions, the rest of the drawing is thrown totally off kilter.
I can fix an H-53 Helicopter but I cannot grasp how to use these programs, I have downloaded most of the free ones and I watched lots of videos but the thing that is lacking is a video showing click by click with explanations slowly on how to create something simple like a 8x11 box with dividers for 20 spaces. i can build that with wood in a couple of hours, but to draw it so I can 3d print it so far is near impossible for me. I did like your video though, so thanks.
I have an electronics background and learned to design using Onshape by watching some of the many UA-cam tutorial videos. The older tutorial videos are still applicable even though Onshape has added functionality over the years. The other nice thing about Onshape is there is no software to install and you are always using the latest version and can always open old projects. Like with any full featured mechanical CAD tool, there is more than one way to get the desired result. I recently designed a trim ring and originally sketched concentric circles, extruded, and used chamfers to refine the shape. It took several steps to get close to what I wanted. I then started over with a cross-section sketch and revolved it. This was much simpler and was easier to modify as any changes to the sketch would show in the resulting part. Once you figure out how each design step builds on the previous steps, all which can be modified as needed, the design flow becomes more intuitive. For your box with dividers example, You can start with a sketch with the bottom of the box as an outline. Then add thin rectangles as the walls and spacers. Next, extrude the entire box to create the bottom box thickness. Next, add another extrude step, highlighting only the walls and spacers. You can extrude the walls and spacers independently if you want the walls taller than the spaces. Once this is done, you can add chamfers or a radius to any of the edges to complete your design.
@@knavekidThanks, I'll try that, what i've been doing is creating the parts individually in the cad program and merge them as a project then in the slicer I separate them and put them together individually. It works sometimes but the scaling and sizing is difficult.
Hand drafting was so tedious, but so satisfying. The attention to detail was amazing but so annoying too. I liked creating the third side from a 2D image, and the very nice mechanical pencils my mom had to buy.
I put myself through college by drafting. Skills gained in an elective jr high class and a 1 year post high school construction design drafting class. I would still prefer to draw by hand but time marches on.
I have actually tried all the CAD software you mentioned including AutoCad. I really don't recommend using Fusion 360 because of very shady business practices of AutoDesk, they constantly removing features and making it more restrictive. Shame, because it has best UI. Onshape is bad due to nothing being private and I would not design something original on it, or firearms for example. FreeCAD just sucks, it takes so much effort to design even the simple shapes, that it feels like immense time waste. Solid Edge in my opinion offers everything for a beginner and more, had zero issues with it, feels familiar to AutoCAD with a lot less strings attached. For performance, check your rendering acceleration, sometimes rendering in software compared to hardware is faster or vice versa
Actually, I find FreeCad quite useful. I particularly like the parametric modeling, which was not mentioned. I agree the AutoDesk software license kills it for me. But I use FreeCad for CAD, CAE and CAM. By the way I used to use Siemen's NX ... FreeCad is not harder to learn.
@@carlslater7492100% agree! Yes it comes with a learning curve, but once you are into Free cad it is actually easy to use with some flaws when you do really complex stuff. And it works native under Linux which is great! I use it to design all my 3D parts. But I cannot recommend it for pure 2D! There are way better options or there. Tried Onshape, but getting to that level of precision like in FreeCAD it is not any easier or quicker and I don't like the fact this is only available online and there is no privacy at all.
I don't about Autodesk. But Onshape is really great, I don't mind the free account. If their prices were a bit lower, I would surely purchase one. Freecad is good. The parametric approach is really good. I like the integrated CAM program as well, it may not be user friendly but it's learnable surely. It takes time being used to Among all this conundrum I would go with Freecad any day, as it's open source and is an active project so far
I started with FreeCAD but eventually switched to Solidedge. Freecad is extremely unreliable, throws errors at you and messes up your model left and right. It was outright infuriating trying to do anything other than the most basic things in FreeCAD. And meanwhile in Solidedge... it just works and does exactly what it's supposed to do without me wanting to rage quit.
The risks with free versions of commercial software is that they can pull the rug on you anytime & add more restrictions or demand payment to give you access to your own files. FreeCAD is under heavy development now & can also get a more modern look with themes.
@@TheGraemeEvans Explain. What you probably mean is that you feel superior because your software costs money. Have a gold star if it makes you feel good.
FreeCad is "clunky" because it can do far more than simple modeling! Not only is it great for doing drawings and creating stuff like .STL files (3D printing), it can also do FEA and some CFD!
No, it's clunky because it doesn't let you decide what tools you want for your tasks. Instead, there's a Workbench for this and another Workbench for that. The whole built-in Workbench thing should be eliminated and replaced with a Settings app that lets you set up your own personal Workbench.
@@stevenlitvintchouk3131 Did you not notice the Right click menu on the Menu/Toolbar (also via Tools menu)? Specifically the Customize option, that allows to do just that? Also in Preferences there is the option to enable or disable workbenches. If that isn't enough, there are plenty of different workbenches that can be added via the Addon Manager & even the option to code some yourself.
For years I've been using FreeCAD (at work) mainly to inspect STEP files, either before I import them into Altium Designer, or check what Altium has exported. I tried a few times to draw my own components or housing with it and it's difficult :) What completely baffles me about FreeCAD though is that it can't measure the distance between two bolt-hole centers. There's a fair chance I just don't know how to do that though :) At work the mechanical people use Siemens NX which I can use too. I used it once a few years ago and it seemed much more intuitive and easier to use than FreeCAD.
One of the benefits of FreeCAD's architecture is it's built in parametric modeling design. This is indispensable for part revisions, since changes can be made that propagate through the entire part with minimal input. Fast and efficient. It takes forethought when building the part, but the payoff is on the backend. That it is open source, has many addons and often updated while free for everyone is a huge added plus.
Fusion and Inventor support it as well. Plus, the revision system in Fusion is saving a lot of time when something goes wrong. I wish FreeCAD main developers started looking at other packages and taken the good bits. For me, the best examples of an opensource alternative to commercial tools Blender and KiCAD. They learned from the industry and made things same or better.
You realize that FreeCad has a big problem with keeping track of features (it's called Topological Naming Problem) and trying to change history breaks things that shouldn't be broken. So it's parametric capabilities are not production ready, it's still not even 1.0 version, and it shows in many tools not working a great deal of time. Or having the same tools in different workbenches like fillet in part and part design workbench. It's unusable, and I am sad that it's not, I would love it to be.
@@AephVeyniker agreed, I have tried it several time, tens of ours, and gave up.. pity. Yes, maybe if I put another tens of hours, I could familize, I do not want to push it down, but my experience was sad...
Parametric modeling is fundamental in almost all the other options too. But in Onshape, Fusion etc it actually works properly, its dynamic and flexible and intuitative too. FreeCAD is possibly the worst piece of software (not just CAD software) I have ever experienced. I really want to use it, I've spent literally 6 months trying to model in it, but its hopeless - and I being negative about free software but is just about unusable without years of practice, and even then its so much slower and more cumbersome than other CAD packages.
At least with freecad I know I can still open my files the next day for the same price of nothing. Unlike all the other options. All locked to their cloud, putting you and by extension your business at the mercy of those vendors. Might be me, but that is just not acceptable. What happens if onshape folds, decides to stop the free version, double the price.... Your shit out of luck, same for fusion. You own nothing, have rights to nothing. Your designs are theirs. You might say it will never happen, but looking at Autodesk and the likes history, I'm not that sure.
Yes, FreeCAD still has the topological naming problem. However it is an amazing piece of free software. While you have to hope that autocad will grant you the free yearly license for Fusion360 in the future, FreeCAD is made for the user. If you get used to it, it is great.
This video should come with huge warning. Before you invest your time to learn and use any product, you should do your homework and study the licences, conditions, plans, etc... Who owns your data? Who owns your work? Will you be able to use the product in the future? Is it possible to export your projects to something else? I do not say that all the "free" products are bad, I am just advising to use a common sense, read the Terms and Conditions, decide how important the tool is for you, etc... For example if you keep the FreeCAD installer on your hard drive, you will most probably be able to install it in 10 years. You may get an dated program but at least you will be able to use the same features as today. I've seen so much "free" (mostly web based) tools to vanish or change the license or model or remove features or move them to the paid or more expensive tier..... I have a simple rule: If the service is free but does not let you export the data in some interchangeable format, I do not use it unless for a one off task - no matter how good it looks.
@@bill4639 I use freecad and openscad. They suit my needs well and both are free for real. Freecad has a steep learning curve, so maybe it is a better to learn blender, but there is a lot of tutorials....
Thanks so much for taking the time to make this video. I'm starting my CAD learning journey today, and yours is the first video I've watched on the topic.
Yes, and at half of the project, the company decides to charge you with $50 per month for using their cad system. Come on guys ... stop using and promoting this shitty cloudstuff. You didnt learn something out of what SONY does with cloud-sold movies and series? You bought them once ago and now you loose them ... and have nothing left, but paid the full price.
When you said that Auto Desk has a free version of 360, you really got my attention. I have a 2 year degree in CAD, I was taught Auto Cad and Inventor, along with other Auto Desk software. While working as a draftsman for a machine shop, that DXF came in real handy, I'd make a shop drawing and convert it to a DXF and export it to a program for a 4000W laser cutter. At that time, my boss was taking part in the development of 360 (which is a combination of Auto Cad, Inventor and other software, as best I know) Now there is a FREE version. I'm a bit excited. Maybe now I can do some of the home stuff again, after loosing my STUDENT license. I've tried other free cad programs and found them confusing and difficult to use, now, maybe things will become a bit better. Thanks for the info. ;-)
Nothing about Autodesk is free, you get a limited package and everything is proprietary and locked into the cloud, if Autodesk decided it wanted to start charging you tomorrow, you would be screwed. Everything is tied to it's cloud. Freecad might not be the best tool, but it's the only one that's actually free.
The Free version Fusion 360 has been nerfed so that it lacks a number of important features. You are also limited to $1,000 of any income derived from the use of the free version. The actually useful hobbyist version is now 85 bucks a month. And you don't own it, you're just renting it. No thank you. Consider Plasticity or Freecad or AlibreCad as an alternative.
Only freecad and Inkscape deserve the label free. Being locked in to a proprietary cloud with a manufacturer that could take all your stuff in the blink of an eye is not free. Autodesk is known for shifting it license model, for screwing it's users. It's just not worth it. Build you business on a tool that nobody can take away or increase the price of at a moments notice. Oneshape isn't much better. It's all in the cloud, what happens if they go bankrupt or decide to quit, double the price etc etc. with them you have nothing, you own nothing. But even your own designs. Nothing that is locked to a cloud and a specific manufacturer should ever be called free. It's just a honeytrap. Could disappear at any moment.
I know this is a bit old now, but FreeCad has really come a long way in the last Year, and the creation of sketches is now a lot smoother, with automated dimensioning that can be done on the fly during creation.
For 2D CAD: NanoCAD, LibreCAD and DoubleCAD XT. For 3D: Blender and FreeCAD. All free for business and personal use. I have not used any of these, because I have to use Autocad in my business.
why does no one ever mention qcad. I have used it for years now for plasma cutters. cant beat its price around 60us I think. it is not a lic with 1 year of updates. and a discount after that year. the updates are usually small so no big deal. i update every 2 or 3 years unless I want or have an issue and im out of update.
l tried hard to get into Free CAD but I just found its interface to be confusing, complicated, and even user-hostile. All those Workbenches are unnecessary and hard to use. Most of today's software tools--even Microsoft Word--have a Settings capability where you can specify which functions will appear in the menus so you can customize the user interface to your needs.
EXCELLENT Advice in EVERY way! [me an old CAD-Designer (since '82!). After several major CADs, now I use ActCAD. No, its not "free", but about as Affordable ANY one actually needing Industry-standard .dwg's of their Ideas, there's NO better. Honestly, my 2D Planwork is my $$$-maker. All the 3D "stuff" is "eye candy" haaaaa. Its for we small-time Designers who do NOT want to become "slaves" to the "CAD-monster"! A blessing, kids! (hey...MY hand-drafting was pretty-dang good! Merged with DTP-software, and SketchUP, it can still be a profitable CAD-alternative for architectural planwork, with .PDF-output). Hope this helps y'all in 2024.
When you are in the Part Studio, you can select a part in the drawing area and right click to bring up a floating menu. In the center of the menu are options for either "Export" or "Export as DXF/DWG". However, if you right click on "Part 1" in the left column area, you DO NOT get the option to export DXF/DWG. I found it most confusing and had to do some searching of content by some of the UA-cam creators before I found the trick.
Awesome! I've always just made a 1:1 drawing in OnShape to export. I just tried it right now and it looks like you can select any flat face, then the export option appears. This will be a huge time saver for me. Thanks for the tip!
@@TimWelds I forgot to mention that there are a number of online sites out there that will convert STL to DXF and other formats. Perhaps in the future you might want to look at ways to convert between formats? In the mfg. business we were forever trying to import and export to vendor and supplier systems using STEP, IGES, DXF, and others.
DSM is the bee's knees for me. Once you have the basics under control it becomes a very powerful tool in your hands. It is a perfect tool for 3D printing enthusiasts. The relatively simple interface actually fooled me into wasting time on other options before I watched a few tutorials dealing with it. The only things counting against it is that (so far) it only runs on Windows and the other matter is that they took away the option of exporting to other formats like .stl. It is still free to download and use but you have to pay extra for those facilities.
@@Bluejohn I know, but it not useful for mechanical parts. It is more for 3D animation. Recently blender introduced a modeling workbench, but it has some problems.
Freecad has a very big fundamental bug that makes it quite unusable. Say you draw something with a cube, then work on one of the cube’s faces by, say, putting a cylinder on that face, if you change the cube’s dimensions, the rest of the drawing is thrown totally off kilter.
Fission 360 anit free read … and free cad systems that hold your designs hostage on a “their” server… or make them public is not free … the cost is just hidden …
I've used CAD for many years even back to the days of DOS. MY personal favorite is QCAD and then FreeCAD. I bought the PRO version to do isometrics. I use it for machining and woodworking. And i took mechanical drawing in high school and college back in the 70's!
Hi, if I need some advice, could you give me some? I want to get certified in CNC, I know I need to have CAD CAM knowledge. Can you guide me? What courses should I take first?
I would like to have a simple drawing app but these are all to complex for me now at 75. I used Autocad to design a house 15 years ago then it all changed and I couldn’t do anything from then on. I need a tutorial to get me going and Onshape baffled me as once again I need help to get going. Paper and pencil from. Now on.
Where does something like SketchUp fall in this lineup? I guess it isn’t a CAD program per se but useful for designing things no? It seems to get a lot of play on UA-cam. I’m new to all of these and would like to put my energy into that which will have the best payoff in the long run. Thanks Tim! Really enjoy your channel.
It really helped me a lot during my first year or so with 3D printing. It does have an add on for .stl files, with a little bit of effort you can make some decent stuff to print.
@@rajendrameena150 yeah I get that it’s not CAD per se, but as far as a digital design tool which does the free web based version which a lot of amateur hobbyist makers use. So not CAD for machining operations but it is CAD for furniture design or room layout or that sort of gross measurement type of activity….
i used autocad many year at work and test 1 month fusion 360 and need say fusion have worst CAD tool after autocad. totally wrong all tools and not good user working this. i delete all fusion my work computer.
Awesome video. I primarily use Autocad and some Solidworks at work. I’d like to use it at home for personal projects which I can’t design on company time. Nice to find some options that won’t break the bank, or get me in trouble.
Just discovered your video. I think this is just what I was looking for. Which do you suggest for; I work for a repair machine shop that has cnc equipment but in repair we often don't have drawings, so I want to create my own drawings that also help dimensionsal aspects of programming mostly 2D programs for cnc lathes? Luckily i can create my own tolerances associated with the industry I repair.
Fusion 360 is Great I can not speak for Autodesk adding and removing features. But you can skip the whole cloud nonsense and export the .f3d files to your local hard disk and open them back up. It seem sthe convert STL in the cloud but you can also export to .3MF files and open these right in the (Prusa) Slicer and even have control and placement over the shapes in the .3MF file. Very cool. I will give Solid edge a try too. Seem like you can never have too many CAD programs!! I'm not into Cloud web based CAD and I think all subscriptions are a RipOff. I'm happ with ViaCAD 12 and Also unfortunately bought CMs Intellicad. Hardly any good doc for it. I have a review on my channel.
I used to use AutoCAD 2006, & 2007. I also used AutoCAD Lite. From what I see, FreeCAD would be the closest to AotoCAD. I'm going to look into it more.
why does no one ever mention qcad. I have used it for years now for plasma cutters. cant beat its price around 60us I think. it is not a lic with 1 year of updates. and a discount after that year. the updates are usually small so no big deal. i update every 2 or 3 years unless I want or have an issue and im out of update.
For the smart and the beautiful: I am looking for remote jobs at home for Solidworks or Autocad. I allow resale of products. You can place an order and resell it for a profit (or find customers and get a percentage). Modeling, drafting, scripts, plugins apis and other
The easiest software that's not free but cheap is home designed by Chief architect. You check and see what files it can export if you're going to try to do partly professional.
Kudos for including Solid Edge, it's been my daily driver for the past 25 years; the lag you referred to may be because it runs best with a Quadro Graphics card.
Yes Tim!!! My favorite welding dude! I just watched 3 other videos on free 2d cad software to design bbq pits on my cnc plasma. Saw your video on the list. Thank you for covering so much material! I have learned a great deal from your channel
Superb overview!! I was looking for an alternative to a 2D CAD like AutoCAD and maybe Inkscape would be a good alternative since you are able to make exact measurement, and it's also an alternative to Illustrator, so two birds, one stone!!
Siemens used to promote Solid Edge as a "Hybrid 2D/3D CAD system" although they don't seem to mention this anymore. However the 2D capability is still there in the Community Edition and I now use it instead of TurboCAd Deluxe (which was my 2D CAD for about 20 years). I have imported much of my 2D work from TC into SE. Just open a 'Draft' document and you will essentially be in 2D - and delve a bit and you will find Layers and all the other 2D stuff you might find useful. Of course, 'Draft' docs are also used to produce any 1st/3rd Angle (or Isometric) projections required from your 3D drafting. So it works well as a 2D CAD and when/if you need 3D the sketching tools for 2D/3D are very similar - all there in one CAD system.
I started out writing out text and MDI to the control. I finished up using MasterCam DOS version for 3 axis milling. I am retired (12 years) and think I'd like to start CAD to keep my mind sharp.
Great video! Heads up to other viewers regarding Inkscape. My fairly recent version does not support CMYK, the absolute prerequisite for full color printing with actual ink. Which in my opinion makes the name Inkscape kind of laughable. I was on a UA-cam tutorial video for inkscape a few months ago and people were bitching up a storm because they did all this elaborate full color design work only to realize it couldn't be converted for full color printing. Just sayin' ;-)
Freecad is a wonderful piece of work. It still has a way to go though. I use it, but it’s often painful. It’s now at a stage that they need to streamline things. Between part, part design, curves and things like sheet metal workbench there is just too many broken things and confusion. But if you look at where it was 5 years ago, wow. I commend that team. I have used solid works and inventor professionally. You can’t compare a $5000 solution to a free one. That is just idiotic. For the money, I am actually not impressed by either. They work, but they are not perfect by any means once you start to work on real systems with many parts etc
As with most any "program", you have to invest time to become any good using the program. So if you want to be good with whatever CAD type program, plan plenty of time to understand what it can and can't do... And have fun...
Thanks for your video. I used autocad, now I can not used anymore. Can you tell me which one is more similar too autocad? I need to make mechanical draws. Which one can import dwg draws? Thanks for your help.
Nice review, will have to check some of these out. Any suggestions for something that is only 2D, for site plans like property lines and exterior limits of floorplan, to scale, printable on letter to tabloid size? Also, remember the scum- eraser bags?
Do any of these free programs offer the ability to create symbols that include attributes like type or color length it doesn’t really matter because that’s something I do dealing in the world of light plots, all the time, putting different types of fixtures and changing things and the data extraction is Kind of important, but the price of AutoCAD is kind of prohibitive?
The free versions have limitations, and the pay versions are all leased, not sold. Running a business using leased tools is a very bad idea. Your livelihood hangs on the whims of the software manufacturer every year.
tks for the vid. the point you miss about open source cad like open cad is that the development moves pretty fast. so if you put in the time to learn it and use it as it matures, in a couple years or less you have a program that is as robust as the commercial offerings but you dont need the fees. take blender as an example. the development speed is getting super fast and it is starting to rival commercial offerings. yes, steep learning curve at first, but in the present it has a super amount of functionality and developers offer addons for niche uses that make it super powerful. free cad may turn out the same because it has come a long way in a short time and continues to improve.
I had to scroll down quite a bit to find your comment mentioning Blender. I wonder why this isn’t in his top 5 when it appears IRL it’s in the top THREE. Free to use for all, a ton of people use it, and it’s by far the most popular CAD program that has full features available to all the users!
While i use onshape for my personal things, for anything i 3d print for my employer i use freecad. Want to be legal... It does cost me a lot of nerves as i miss the intuitivness of onshape greatly. One "advantage", if you will, of FreeCad for that is that there is a portable version: No idea how other companies around the world handle their IT, but the office IT computers where i work, prevent you from installing anything for security reasons. And as we aren't a production company, i have to use the office PC for the FreeCad drawing, so i was happy to find a portable version. (The thing i made recently was a mounting adapter for non standard measuring equipment a collegue of mine built to make our work easier)
There are a few things you can do in Fusion 360 you can't do in Onshape but exporting sketches as dxf isn't one of them. I use both of them but I like Onshape better as a free program. It's also easier to learn.
Very nice and informative video! Thanks a lot for sharing this kind of content! About the 360 fusion for personal use: I'm planning to use it in order to learn 3D modelling again, but if a project I create is nice enough to include in a portfolio, would such a thing go beyond the scope of the license?
Check out Flexispot for ergonomic standing desks and chairs. Use the exclusive code "BFYTB" to get $30 off your E7/E7pro/C7 purchase. You can also win a free order during their black friday sale.
E7 Standing Desk (USA)： bit.ly/46XZoBe
C7 Chair (USA)： bit.ly/3u8n0os
E7 Standing Desk (Canada)： bit.ly/3MyYW4q
Don't forget, Inkscape also has the ability to create Gcode output of your 2d design under the tab: Extensions > Gcodetools
Pretty solid video, but you missed the main feature of solid edge - synchronous design - which no other software has.
FreeCAD isn't for beginners, good thing is compared to commercial alternatives is that it will be free and open-source forever, can't say same thing for onshape/fusion or similar alternatives.
I am a beginner and I started with FreedCad. Watched some good tutorial videos. It may be not that intuitive, but it is the only really free CAD software out of that list.
So FreeCAD won't block you from accessing your files ever? It is truly free and open sourced?
I'm a beginner, drawing only what I need for repairs when original parts are not available. Mostly simple shapes. Sometimes with months in between I have to relearn a lot. Yet I can make simple parts within the hour. With a little video help and the basics you can learn it very fast. I would say no worse than any of the others.
It is worth noting that FreeCAD is actually taking a serious look at UI and UX to make it more intuitive and options the experience more. You've made some valid points though.
freecad not working my table computer, raspberry pi 4 8gb. i try manytime, what software can use raspian OS.
@@mattivirta
Get a real Pc or laptop.
Most "free" softwares are burdened with piece of trash humans that "religiously believe" that the way they do things in a UI is how EVERYONE must do things in a UI. Almost every OpenSource/Free product with any decent functionality has this problem. And it's not just a "no UI/UX" person that won't do the work. They BLOCK IT actively. It is absolutely the #1. Blocker for the adoption of most software.
Are they taking a serious look at the fundamental bug that makes it unusable?
Say you draw something with a cube, then work on one of the cube’s faces by, say, putting a cylinder on that face, if you change the cube’s dimensions, the rest of the drawing is thrown totally off kilter.
@@emdxemdx yes the fix is planned for the next stable release. I'd disagree that FreeCAD is unusable because of it though.
I can fix an H-53 Helicopter but I cannot grasp how to use these programs, I have downloaded most of the free ones and I watched lots of videos but the thing that is lacking is a video showing click by click with explanations slowly on how to create something simple like a 8x11 box with dividers for 20 spaces. i can build that with wood in a couple of hours, but to draw it so I can 3d print it so far is near impossible for me. I did like your video though, so thanks.
I have an electronics background and learned to design using Onshape by watching some of the many UA-cam tutorial videos. The older tutorial videos are still applicable even though Onshape has added functionality over the years. The other nice thing about Onshape is there is no software to install and you are always using the latest version and can always open old projects. Like with any full featured mechanical CAD tool, there is more than one way to get the desired result. I recently designed a trim ring and originally sketched concentric circles, extruded, and used chamfers to refine the shape. It took several steps to get close to what I wanted. I then started over with a cross-section sketch and revolved it. This was much simpler and was easier to modify as any changes to the sketch would show in the resulting part.
Once you figure out how each design step builds on the previous steps, all which can be modified as needed, the design flow becomes more intuitive. For your box with dividers example, You can start with a sketch with the bottom of the box as an outline. Then add thin rectangles as the walls and spacers. Next, extrude the entire box to create the bottom box thickness. Next, add another extrude step, highlighting only the walls and spacers. You can extrude the walls and spacers independently if you want the walls taller than the spaces. Once this is done, you can add chamfers or a radius to any of the edges to complete your design.
@@knavekidThanks, I'll try that, what i've been doing is creating the parts individually in the cad program and merge them as a project then in the slicer I separate them and put them together individually. It works sometimes but the scaling and sizing is difficult.
Use thinkercad is easy to use at learning experience to do simple stuff fast @@bTusler
Hand drafting was so tedious, but so satisfying. The attention to detail was amazing but so annoying too. I liked creating the third side from a 2D image, and the very nice mechanical pencils my mom had to buy.
I put myself through college by drafting.
Skills gained in an elective jr high class and a 1 year post high school construction design drafting class.
I would still prefer to draw by hand but time marches on.
I have actually tried all the CAD software you mentioned including AutoCad. I really don't recommend using Fusion 360 because of very shady business practices of AutoDesk, they constantly removing features and making it more restrictive. Shame, because it has best UI. Onshape is bad due to nothing being private and I would not design something original on it, or firearms for example. FreeCAD just sucks, it takes so much effort to design even the simple shapes, that it feels like immense time waste. Solid Edge in my opinion offers everything for a beginner and more, had zero issues with it, feels familiar to AutoCAD with a lot less strings attached. For performance, check your rendering acceleration, sometimes rendering in software compared to hardware is faster or vice versa
Thanks for the tip on Solid Edge performance! I'll look into that.
Actually, I find FreeCad quite useful. I particularly like the parametric modeling, which was not mentioned.
I agree the AutoDesk software license kills it for me. But I use FreeCad for CAD, CAE and CAM. By the way I used to use Siemen's NX ... FreeCad is not harder to learn.
Just want to emphasize what a horrible and dishonest company AutoDesk is.
@@carlslater7492100% agree! Yes it comes with a learning curve, but once you are into Free cad it is actually easy to use with some flaws when you do really complex stuff.
And it works native under Linux which is great! I use it to design all my 3D parts. But I cannot recommend it for pure 2D! There are way better options or there.
Tried Onshape, but getting to that level of precision like in FreeCAD it is not any easier or quicker and I don't like the fact this is only available online and there is no privacy at all.
I don't about Autodesk. But Onshape is really great, I don't mind the free account. If their prices were a bit lower, I would surely purchase one.
Freecad is good. The parametric approach is really good. I like the integrated CAM program as well, it may not be user friendly but it's learnable surely.
It takes time being used to
Among all this conundrum I would go with Freecad any day, as it's open source and is an active project so far
I started with FreeCAD but eventually switched to Solidedge.
Freecad is extremely unreliable, throws errors at you and messes up your model left and right. It was outright infuriating trying to do anything other than the most basic things in FreeCAD.
And meanwhile in Solidedge... it just works and does exactly what it's supposed to do without me wanting to rage quit.
The risks with free versions of commercial software is that they can pull the rug on you anytime & add more restrictions or demand payment to give you access to your own files. FreeCAD is under heavy development now & can also get a more modern look with themes.
Are you saying FreeCAD is LESS likely to screw you over?
@@bill4639 No, but why would they, since they are non-profit & has stayed alive for a couple of decades.
Your already screwed if your using FreeCAD.
@@TheGraemeEvans *you’re. How are you screwed if you can design and print a part for free?
@@TheGraemeEvans Explain. What you probably mean is that you feel superior because your software costs money. Have a gold star if it makes you feel good.
One thing that is quite important is that free cad is also available for Mac OS and Linux.
I would like to see a CAD software for offline use where a license can be bought. Feeling sick of all that subscription crap.
I stuck with ACAD R10 for that reason A friend of mine uses T**** but it now insists on the cloud and there is no Internet in many places in Africa.
Alibre is decent.
FreeCad is "clunky" because it can do far more than simple modeling! Not only is it great for doing drawings and creating stuff like .STL files (3D printing), it can also do FEA and some CFD!
I agree, but to master its true power, you have to learn a few lessons, and then a few more, and more...
No, it's clunky because it doesn't let you decide what tools you want for your tasks. Instead, there's a Workbench for this and another Workbench for that. The whole built-in Workbench thing should be eliminated and replaced with a Settings app that lets you set up your own personal Workbench.
@@stevenlitvintchouk3131, you customize your workbench for the job at hand, grouping the tools you want to use.
@@stevenlitvintchouk3131 Did you not notice the Right click menu on the Menu/Toolbar (also via Tools menu)? Specifically the Customize option, that allows to do just that? Also in Preferences there is the option to enable or disable workbenches. If that isn't enough, there are plenty of different workbenches that can be added via the Addon Manager & even the option to code some yourself.
For years I've been using FreeCAD (at work) mainly to inspect STEP files, either before I import them into Altium Designer, or check what Altium has exported. I tried a few times to draw my own components or housing with it and it's difficult :) What completely baffles me about FreeCAD though is that it can't measure the distance between two bolt-hole centers. There's a fair chance I just don't know how to do that though :)
At work the mechanical people use Siemens NX which I can use too. I used it once a few years ago and it seemed much more intuitive and easier to use than FreeCAD.
One of the benefits of FreeCAD's architecture is it's built in parametric modeling design. This is indispensable for part revisions, since changes can be made that propagate through the entire part with minimal input. Fast and efficient. It takes forethought when building the part, but the payoff is on the backend. That it is open source, has many addons and often updated while free for everyone is a huge added plus.
Fusion and Inventor support it as well. Plus, the revision system in Fusion is saving a lot of time when something goes wrong. I wish FreeCAD main developers started looking at other packages and taken the good bits. For me, the best examples of an opensource alternative to commercial tools Blender and KiCAD. They learned from the industry and made things same or better.
You realize that FreeCad has a big problem with keeping track of features (it's called Topological Naming Problem) and trying to change history breaks things that shouldn't be broken. So it's parametric capabilities are not production ready, it's still not even 1.0 version, and it shows in many tools not working a great deal of time. Or having the same tools in different workbenches like fillet in part and part design workbench.
It's unusable, and I am sad that it's not, I would love it to be.
@@AephVeyniker agreed, I have tried it several time, tens of ours, and gave up.. pity. Yes, maybe if I put another tens of hours, I could familize, I do not want to push it down, but my experience was sad...
Parametric modeling is fundamental in almost all the other options too. But in Onshape, Fusion etc it actually works properly, its dynamic and flexible and intuitative too. FreeCAD is possibly the worst piece of software (not just CAD software) I have ever experienced. I really want to use it, I've spent literally 6 months trying to model in it, but its hopeless - and I being negative about free software but is just about unusable without years of practice, and even then its so much slower and more cumbersome than other CAD packages.
At least with freecad I know I can still open my files the next day for the same price of nothing. Unlike all the other options. All locked to their cloud, putting you and by extension your business at the mercy of those vendors. Might be me, but that is just not acceptable.
What happens if onshape folds, decides to stop the free version, double the price.... Your shit out of luck, same for fusion. You own nothing, have rights to nothing. Your designs are theirs.
You might say it will never happen, but looking at Autodesk and the likes history, I'm not that sure.
Yes, FreeCAD still has the topological naming problem. However it is an amazing piece of free software. While you have to hope that autocad will grant you the free yearly license for Fusion360 in the future, FreeCAD is made for the user. If you get used to it, it is great.
This video should come with huge warning. Before you invest your time to learn and use any product, you should do your homework and study the licences, conditions, plans, etc... Who owns your data? Who owns your work? Will you be able to use the product in the future? Is it possible to export your projects to something else?
I do not say that all the "free" products are bad, I am just advising to use a common sense, read the Terms and Conditions, decide how important the tool is for you, etc... For example if you keep the FreeCAD installer on your hard drive, you will most probably be able to install it in 10 years. You may get an dated program but at least you will be able to use the same features as today.
I've seen so much "free" (mostly web based) tools to vanish or change the license or model or remove features or move them to the paid or more expensive tier.....
I have a simple rule: If the service is free but does not let you export the data in some interchangeable format, I do not use it unless for a one off task - no matter how good it looks.
So do you have any recommendations?
@@bill4639 I use freecad and openscad. They suit my needs well and both are free for real. Freecad has a steep learning curve, so maybe it is a better to learn blender, but there is a lot of tutorials....
I fu**ing appreciate this note
Thanks so much for taking the time to make this video. I'm starting my CAD learning journey today, and yours is the first video I've watched on the topic.
Yes, and at half of the project, the company decides to charge you with $50 per month for using their cad system. Come on guys ... stop using and promoting this shitty cloudstuff. You didnt learn something out of what SONY does with cloud-sold movies and series? You bought them once ago and now you loose them ... and have nothing left, but paid the full price.
Thanks Tim we appreciate you putting in the time to make this video 😊👍
Thanks Mike! 👍
When you said that Auto Desk has a free version of 360, you really got my attention.
I have a 2 year degree in CAD, I was taught Auto Cad and Inventor, along with other Auto Desk software.
While working as a draftsman for a machine shop, that DXF came in real handy, I'd make a shop drawing and convert it to a DXF and export it to a program for a 4000W laser cutter.
At that time, my boss was taking part in the development of 360 (which is a combination of Auto Cad, Inventor and other software, as best I know)
Now there is a FREE version. I'm a bit excited. Maybe now I can do some of the home stuff again, after loosing my STUDENT license. I've tried other free cad programs and found them confusing and difficult to use, now, maybe things will become a bit better.
Thanks for the info. ;-)
Nothing about Autodesk is free, you get a limited package and everything is proprietary and locked into the cloud, if Autodesk decided it wanted to start charging you tomorrow, you would be screwed. Everything is tied to it's cloud.
Freecad might not be the best tool, but it's the only one that's actually free.
The Free version Fusion 360 has been nerfed so that it lacks a number of important features. You are also limited to $1,000 of any income derived from the use of the free version. The actually useful hobbyist version is now 85 bucks a month. And you don't own it, you're just renting it. No thank you. Consider Plasticity or Freecad or AlibreCad as an alternative.
Only freecad and Inkscape deserve the label free. Being locked in to a proprietary cloud with a manufacturer that could take all your stuff in the blink of an eye is not free.
Autodesk is known for shifting it license model, for screwing it's users. It's just not worth it. Build you business on a tool that nobody can take away or increase the price of at a moments notice.
Oneshape isn't much better. It's all in the cloud, what happens if they go bankrupt or decide to quit, double the price etc etc. with them you have nothing, you own nothing. But even your own designs.
Nothing that is locked to a cloud and a specific manufacturer should ever be called free. It's just a honeytrap. Could disappear at any moment.
I know this is a bit old now, but FreeCad has really come a long way in the last Year, and the creation of sketches is now a lot smoother, with automated dimensioning that can be done on the fly during creation.
As far as I'm aware Autodesk is owned by Facebook which in turn explains everything.
I'm going with freecad as it has a workbench for GRBL construction and tools and tool path control.
For 2D CAD: NanoCAD, LibreCAD and DoubleCAD XT. For 3D: Blender and FreeCAD. All free for business and personal use. I have not used any of these, because I have to use Autocad in my business.
why does no one ever mention qcad. I have used it for years now for plasma cutters. cant beat its price around 60us I think. it is not a lic with 1 year of updates. and a discount after that year. the updates are usually small so no big deal. i update every 2 or 3 years unless I want or have an issue and im out of update.
FreeCAD... That's all you need to know!
but not working raspberry pi 4 8gb table computer.
@@mattivirtaget a real Pc or laptop
@@lusa3002 too expensive, cost thailand more than i have pension salary.
l tried hard to get into Free CAD but I just found its interface to be confusing, complicated, and even user-hostile. All those Workbenches are unnecessary and hard to use. Most of today's software tools--even Microsoft Word--have a Settings capability where you can specify which functions will appear in the menus so you can customize the user interface to your needs.
EXCELLENT Advice in EVERY way! [me an old CAD-Designer (since '82!). After several major CADs, now I use ActCAD. No, its not "free", but about as Affordable ANY one actually needing Industry-standard .dwg's of their Ideas, there's NO better. Honestly, my 2D Planwork is my $$$-maker. All the 3D "stuff" is "eye candy" haaaaa. Its for we small-time Designers who do NOT want to become "slaves" to the "CAD-monster"! A blessing, kids! (hey...MY hand-drafting was pretty-dang good! Merged with DTP-software, and SketchUP, it can still be a profitable CAD-alternative for architectural planwork, with .PDF-output). Hope this helps y'all in 2024.
When you are in the Part Studio, you can select a part in the drawing area and right click to bring up a floating menu.
In the center of the menu are options for either "Export" or "Export as DXF/DWG".
However, if you right click on "Part 1" in the left column area, you DO NOT get the option to export DXF/DWG.
I found it most confusing and had to do some searching of content by some of the UA-cam creators before I found the trick.
Awesome! I've always just made a 1:1 drawing in OnShape to export. I just tried it right now and it looks like you can select any flat face, then the export option appears. This will be a huge time saver for me. Thanks for the tip!
@@TimWelds
I forgot to mention that there are a number of online sites out there that will convert STL to DXF and other formats.
Perhaps in the future you might want to look at ways to convert between formats? In the mfg. business we were forever trying to import and export to vendor and supplier systems using STEP, IGES, DXF, and others.
I believe another good option is Design Spark Mechanical, slight learning curve but very powerful
DSM is the bee's knees for me. Once you have the basics under control it becomes a very powerful tool in your hands. It is a perfect tool for 3D printing enthusiasts. The relatively simple interface actually fooled me into wasting time on other options before I watched a few tutorials dealing with it. The only things counting against it is that (so far) it only runs on Windows and the other matter is that they took away the option of exporting to other formats like .stl. It is still free to download and use but you have to pay extra for those facilities.
I want to hand draw a complicated part then have the software anylize it and out put a regular cad drawing then let me enter dimensions.
Am surprised the free version of Design Spark Mechanical didnt make an appearance
Free Cad is the only one working natively on linux
Sort of. Onshape is runned in the web-browser an that works fine in Linux.
i have a problem of calling "Soft" something you run in browser and need access to internet for it i would rather call it "service"
I believe Blender runs on Linux, but only limited cad functions even with the cad sketcher add on
@@Bluejohn I know, but it not useful for mechanical parts. It is more for 3D animation. Recently blender introduced a modeling workbench, but it has some problems.
Freecad has a very big fundamental bug that makes it quite unusable.
Say you draw something with a cube, then work on one of the cube’s faces by, say, putting a cylinder on that face, if you change the cube’s dimensions, the rest of the drawing is thrown totally off kilter.
It is called the topological naming problem, and you are correct. It is a big flaw.
they changed the name to fusion, BUT WE WILL ALL CALL IT FUSION 360
Fission 360 anit free read … and free cad systems that hold your designs hostage on a “their” server… or make them public is not free … the cost is just hidden …
I just mean that you can design things without paying money.
I've used CAD for many years even back to the days of DOS. MY personal favorite is QCAD and then FreeCAD. I bought the PRO version to do isometrics. I use it for machining and woodworking. And i took mechanical drawing in high school and college back in the 70's!
Inscape is great for 2D drawing but the exporting of SVG format to DXF format is not completely reliable IMHO.
Hi, if I need some advice, could you give me some? I want to get certified in CNC, I know I need to have CAD CAM knowledge. Can you guide me? What courses should I take first?
I would like to have a simple drawing app but these are all to complex for me now at 75. I used Autocad to design a house 15 years ago then it all changed and I couldn’t do anything from then on. I need a tutorial to get me going and Onshape baffled me as once again I need help to get going. Paper and pencil from. Now on.
Where does something like SketchUp fall in this lineup? I guess it isn’t a CAD program per se but useful for designing things no? It seems to get a lot of play on UA-cam. I’m new to all of these and would like to put my energy into that which will have the best payoff in the long run. Thanks Tim! Really enjoy your channel.
It really helped me a lot during my first year or so with 3D printing. It does have an add on for .stl files, with a little bit of effort you can make some decent stuff to print.
SketchUp is not an actual cad program because it doesn't preserve precision, also not free to use.
@@rajendrameena150 yeah I get that it’s not CAD per se, but as far as a digital design tool which does the free web based version which a lot of amateur hobbyist makers use. So not CAD for machining operations but it is CAD for furniture design or room layout or that sort of gross measurement type of activity….
i used autocad many year at work and test 1 month fusion 360 and need say fusion have worst CAD tool after autocad. totally wrong all tools and not good user working this. i delete all fusion my work computer.
Awesome video. I primarily use Autocad and some Solidworks at work. I’d like to use it at home for personal projects which I can’t design on company time. Nice to find some options that won’t break the bank, or get me in trouble.
Onshape allows exporting into DXF files
Just discovered your video. I think this is just what I was looking for.
Which do you suggest for;
I work for a repair machine shop that has cnc equipment but in repair we often don't have drawings, so I want to create my own drawings that also help dimensionsal aspects of programming mostly 2D programs for cnc lathes? Luckily i can create my own tolerances associated with the industry I repair.
Fusion 360 is Great I can not speak for Autodesk adding and removing features. But you can skip the whole cloud nonsense and export the .f3d files to your local hard disk and open them back up. It seem sthe convert STL in the cloud but you can also export to .3MF files and open these right in the (Prusa) Slicer and even have control and placement over the shapes in the .3MF file. Very cool. I will give Solid edge a try too. Seem like you can never have too many CAD programs!! I'm not into Cloud web based CAD and I think all subscriptions are a RipOff. I'm happ with ViaCAD 12 and Also unfortunately bought CMs Intellicad. Hardly any good doc for it. I have a review on my channel.
I do cnc wood so im new to 3d, how do you make gcode with these programs? I use vcarve which has cad/cam together...
I used to use AutoCAD 2006, & 2007. I also used AutoCAD Lite. From what I see, FreeCAD would be the closest to AotoCAD. I'm going to look into it more.
good information. The sound is "muddy", hard to understand. Maybe change to an external microphone.
Design Spark Mechanical would have been a nice addition to this list.
Not at all! It can't export or import anything.
It does .STL which works great with my 3D printer. It's easy for making 3D designs quickly.
The free (aka "Explorer") version of DesignSpark Mechanical is intuitive and can do almost anything a maker needs :-)
why does no one ever mention qcad. I have used it for years now for plasma cutters. cant beat its price around 60us I think. it is not a lic with 1 year of updates. and a discount after that year. the updates are usually small so no big deal. i update every 2 or 3 years unless I want or have an issue and im out of update.
For the smart and the beautiful:
I am looking for remote jobs at home for Solidworks or Autocad.
I allow resale of products. You can place an order and resell it
for a profit (or find customers and get a percentage).
Modeling, drafting, scripts, plugins apis and other
The easiest software that's not free but cheap is home designed by Chief architect. You check and see what files it can export if you're going to try to do partly professional.
Kudos for including Solid Edge, it's been my daily driver for the past 25 years; the lag you referred to may be because it runs best with a Quadro Graphics card.
Why no design spark mechanical brilliant cad
I remember using something called Architect during the late 90s, does that still exist? 😂 ✌
is any apps free?
For 2d design I still use a 20 year old version of Drafix Quickcad. Works great for cnc router projects. And full size plans.
thanks for all the info i am looking for a software to design fences and house projects
Norton wouldn't let me access the FreeCad web site saying it's unsafe to access!
Williams Maria Young Christopher Jones Michael
Hi, would you be interested in designing a prototype box to be 3D printed?
Yes Tim!!! My favorite welding dude! I just watched 3 other videos on free 2d cad software to design bbq pits on my cnc plasma. Saw your video on the list. Thank you for covering so much material! I have learned a great deal from your channel
Great video.
Thank you for the info!
@Tim, what's about LibreCAD?
I’ll have to check it out, thanks for the tip!
QCAD for 2D drawings is also not too bad
Superb overview!! I was looking for an alternative to a 2D CAD like AutoCAD and maybe Inkscape would be a good alternative since you are able to make exact measurement, and it's also an alternative to Illustrator, so two birds, one stone!!
Try nanoCad v5! Basically all the 2D AutoCad functioanlity with good old autocad 2006 interface.
@@BasicallyChillCrow I will definitely check that out!
Siemens used to promote Solid Edge as a "Hybrid 2D/3D CAD system" although they don't seem to mention this anymore. However the 2D capability is still there in the Community Edition and I now use it instead of TurboCAd Deluxe (which was my 2D CAD for about 20 years). I have imported much of my 2D work from TC into SE. Just open a 'Draft' document and you will essentially be in 2D - and delve a bit and you will find Layers and all the other 2D stuff you might find useful. Of course, 'Draft' docs are also used to produce any 1st/3rd Angle (or Isometric) projections required from your 3D drafting. So it works well as a 2D CAD and when/if you need 3D the sketching tools for 2D/3D are very similar - all there in one CAD system.
DS Mechanical ?!
You can also export a sketch to DXF from OS. Simply right click the sketch and pick export DXF/DWG from the menu
I started out writing out text and MDI to the control. I finished up using MasterCam DOS version for 3 axis milling. I am retired (12 years) and think I'd like to start CAD to keep my mind sharp.
Maybe include tinkercad
Agree. Tinkercad is pretty basic, but it works well for small projects and is a great introduction to CAD for newbies.
Is there a free version of fusion360 in the UK?
Great video!
Heads up to other viewers regarding Inkscape. My fairly recent version does not support CMYK, the absolute prerequisite for full color printing with actual ink. Which in my opinion makes the name Inkscape kind of laughable. I was on a UA-cam tutorial video for inkscape a few months ago and people were bitching up a storm because they did all this elaborate full color design work only to realize it couldn't be converted for full color printing.
Just sayin' ;-)
Hi, first time watching. Just a suggestion....When you make such videos please ensure to put the links of software too forhelp of viewer.
AutoCad slime company.
Lee Deborah Walker Mark Hernandez Matthew
Freecad is a wonderful piece of work. It still has a way to go though. I use it, but it’s often painful. It’s now at a stage that they need to streamline things. Between part, part design, curves and things like sheet metal workbench there is just too many broken things and confusion. But if you look at where it was 5 years ago, wow. I commend that team. I have used solid works and inventor professionally. You can’t compare a $5000 solution to a free one. That is just idiotic. For the money, I am actually not impressed by either. They work, but they are not perfect by any means once you start to work on real systems with many parts etc
Hall Amy Walker Cynthia Lee Donna
As with most any "program", you have to invest time to become any good using the program. So if you want to be good with whatever CAD type program, plan plenty of time to understand what it can and can't do... And have fun...
Thanks for your video. I used autocad, now I can not used anymore. Can you tell me which one is more similar too autocad? I need to make mechanical draws. Which one can import dwg draws? Thanks for your help.
Nice review, will have to check some of these out. Any suggestions for something that is only 2D, for site plans like property lines and exterior limits of floorplan, to scale, printable on letter to tabloid size? Also, remember the scum- eraser bags?
Do any of these free programs offer the ability to create symbols that include attributes like type or color length it doesn’t really matter because that’s something I do dealing in the world of light plots, all the time, putting different types of fixtures and changing things and the data extraction is Kind of important, but the price of AutoCAD is kind of prohibitive?
OMG.... "takes so much energy". You look like a tough guy, man up and stop whining.
Great video! Thanks....Which CAD Program would you recommend to create 3D parts and then from a group of parts, create an assembly?
The free versions have limitations, and the pay versions are all leased, not sold.
Running a business using leased tools is a very bad idea. Your livelihood hangs on the whims of the software manufacturer every year.
Just wondering if the Fusion 360 free version is only for a period of time, like for a few months or a year. Does anyone know if thats the case?
tks for the vid. the point you miss about open source cad like open cad is that the development moves pretty fast. so if you put in the time to learn it and use it as it matures, in a couple years or less you have a program that is as robust as the commercial offerings but you dont need the fees. take blender as an example. the development speed is getting super fast and it is starting to rival commercial offerings. yes, steep learning curve at first, but in the present it has a super amount of functionality and developers offer addons for niche uses that make it super powerful. free cad may turn out the same because it has come a long way in a short time and continues to improve.
I had to scroll down quite a bit to find your comment mentioning Blender. I wonder why this isn’t in his top 5 when it appears IRL it’s in the top THREE. Free to use for all, a ton of people use it, and it’s by far the most popular CAD program that has full features available to all the users!
Do you have a business that I can engage for design and cad drawings? We have designs we need created and potentially tested virtually.
Thank you
Ed
Discovered Solid Edge with this video and I am pleased with it. Have my like.
Does anyone have experience with Onshape, and any opinions on creating construction site/floor plans?
My problem with Solid Edge was, when I tried them last October, the tutorials were so out of date as to be useless.
While i use onshape for my personal things, for anything i 3d print for my employer i use freecad. Want to be legal...
It does cost me a lot of nerves as i miss the intuitivness of onshape greatly.
One "advantage", if you will, of FreeCad for that is that there is a portable version: No idea how other companies around the world handle their IT, but the office IT computers where i work, prevent you from installing anything for security reasons.
And as we aren't a production company, i have to use the office PC for the FreeCad drawing, so i was happy to find a portable version.
(The thing i made recently was a mounting adapter for non standard measuring equipment a collegue of mine built to make our work easier)
OnShape is great but lacking in a decent CAM component.
"make sure you stick around for that one..."
Goodbye
There are a few things you can do in Fusion 360 you can't do in Onshape but exporting sketches as dxf isn't one of them. I use both of them but I like Onshape better as a free program. It's also easier to learn.
i have try all of them and choose onshape. The only con to me is that i have poor connection all the time (south of Brazil).
Mac?
Very nice and informative video! Thanks a lot for sharing this kind of content!
About the 360 fusion for personal use: I'm planning to use it in order to learn 3D modelling again, but if a project I create is nice enough to include in a portfolio, would such a thing go beyond the scope of the license?
Coool cause...i been using tinker cad... thank u❤😊
Autodesk is the program that allows scammers to take control of your computer.
Freecad is bit looks messy but you will recognise its capabilities.
Actually you can also export dxf files easily in onshape, just select some face and then right click and there should be a option to export dxf/dwg