Would there be a cheat sheet or something for what gears to run on a specific drive line? I have an sc mod and I’m trying to dial it in at my local track.
no there is not , some people are able to figure it out based on driveline footages but the biggest issue is , theres too many variables. air temp, motor timing, esc timing, tread on tires (tires are different sizes) , motor turn. example. i may be running a hobbywing xr10pro with a 10.5 t motor and you could be running the same esc with a 8.5t motor. i would be a tooth or two higher then you because of rpm range. but you could take the same motor and esc and i could add settings like boost , then i could cut that down another tooth. thats why theres no magical number. The best advise i can give you is simply ask some racers in your class what gear there running, and start near that spot. run about 15 laps and check your motor temp, shoot for around 120 degrees. you can adjust gearing, can timing and boost on esc to achieve these parameters. i know this is a lengthy answer , because there is no great answer.
@@timmcgrath537 all i see is this currently. which is the whole kit. but keep an eye out im sure the trays will show up soon. www.ebay.com/itm/185691714428?hash=item2b3c16b37c:g:OFwAAOSwS5tiv29l
im confused on what you are considering roll out...you don't mention anything on tire size. im assuming you are trying to talk about gear ratio...please correct me if im wrong
I was talking about gearing and gear ratios and explaining how every tracks race line is different so it affects what gear to run. And I was using the wrong term when I was saying roll out instead of race line.... And roll out should be the distance 1 turn of your gearing what the size of tire you have.... I know its confusing thats why I said let me know in the comments because I wasn't sure how clear or unclear I was "trying" to explain it.
good stuff as always chris. mu buggy is getting close to ideal. now to get the mudboss dialed
Would there be a cheat sheet or something for what gears to run on a specific drive line? I have an sc mod and I’m trying to dial it in at my local track.
no there is not , some people are able to figure it out based on driveline footages but the biggest issue is , theres too many variables.
air temp, motor timing, esc timing, tread on tires (tires are different sizes) , motor turn.
example. i may be running a hobbywing xr10pro with a 10.5 t motor and you could be running the same esc with a 8.5t motor.
i would be a tooth or two higher then you because of rpm range. but you could take the same motor and esc and i could add settings like boost , then i could cut that down another tooth. thats why theres no magical number.
The best advise i can give you is simply ask some racers in your class what gear there running, and start near that spot. run about 15 laps and check your motor temp, shoot for around 120 degrees. you can adjust gearing, can timing and boost on esc to achieve these parameters.
i know this is a lengthy answer , because there is no great answer.
Didn’t see the esc/receiver mount on your eBay store. Are they out of stock?
They must be. I will look at it tonight for you.
www.ebay.com/itm/185485114577?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=3WZnhqhYSKa&sssrc=2047675&ssuid=3WZnhqhYSKa&widget_ver=artemis&media=COPY
Is there a new link for this product?
@@ChrisPatrickRC link is no good
@@timmcgrath537 all i see is this currently. which is the whole kit. but keep an eye out im sure the trays will show up soon.
www.ebay.com/itm/185691714428?hash=item2b3c16b37c:g:OFwAAOSwS5tiv29l
Can't find the electronics tray via Google search or the company. Could you link it please?
www.ebay.com/itm/185754119395?hash=item2b3fceece3:g:a0sAAOSw9ndj1VAD&amdata=enc%3AAQAHAAAAoAKTDupG%2BJ8c%2Fj7fEUo569%2FhSH1WRFbvycnLFieUcyWTQjTr3GefbvZeuyERiq3T6fVjoDjKO62%2FZ2I%2B%2Bzbe3x5Xd27VQ%2BQ8RZdV767xBK2k4ch2o6nqqB6RMUVHisHsCjfpIDcbgsySJ1k%2B9WAZsLHVMRuie1cmXWZxM1GKEUyJvR0Jqtd4Lpvgf9SzmnmBLBbpB4s9wNBTKa9HvUSXa%2FU%3D%7Ctkp%3ABk9SR5zjpJa_YQ
im confused on what you are considering roll out...you don't mention anything on tire size. im assuming you are trying to talk about gear ratio...please correct me if im wrong
I was talking about gearing and gear ratios and explaining how every tracks race line is different so it affects what gear to run. And I was using the wrong term when I was saying roll out instead of race line....
And roll out should be the distance 1 turn of your gearing what the size of tire you have.... I know its confusing thats why I said let me know in the comments because I wasn't sure how clear or unclear I was "trying" to explain it.