NCASE M2 has a MAJOR FLAW - Let's Fix it
Вставка
- Опубліковано 21 лис 2024
- Timestamps:
Intro 0:01
The Flaw 0:17
Back Panel Gap 0:58
My work around 1:36
Bottom panel fix 2:30
Hole punch 3:07
Conclusion 3:34
Outro 4:08
400x300mm Mesh Panels used:
a.co/d/4aNIG72
Shot On:
Sony A7IV
Sony 24-70mm f2.8 GM
They gave filters with magnets on the sides with the M1 back then.
1:44 That effect is called a Moiré pattern. Wikipedia has a great article about it with more examples and images.
Lol, aluminum isn’t magnetic bro.
Whoops, I was today years old when I realized this lol
I ordered this case and was thinking the same thing. Would be interesting to see a comparison between with and w/o filters in terms of temps, noise levels and maybe even performance.
Dust is a compromise for going SFF.
You've got some great visuals and editing bro. I think the filters will restrict airflow quite a lot so I'm keen to see how your tests go. It's a great looking case.
Thank you, it might but I’m definitely going to test temps and airflow. Either way some kind of filtering is going to be beneficial I have the grater which might help because the front should be clear of any obstructions.
Great vid. If you don’t have a 3D printer, could the mesh work for filling those rear panel gaps?
@@NeuralVoidSolutions no because there won’t be anything to hold it up unless your willing to do some diy holes in the frame but I wouldn’t recommend that. Luckily the GPU and MB I/O will cover most of the empty space
So why you got grater one?
@@Donbros air flow, this only has to do with the front panel and this was b4 I know what I know now i also just liked the way it looked
I planned to do the same on my M2, and I am going to use black "nylon mesh gauze" 100 or 80. I used that fully cover every panel of my T1 and its work very well. Btw, what is RGB led you used in the case.
Hey I might do the same, the nylon mesh is probably better for airflow so I’ll add that to my testing. The RGB was a LED panel from Savage that I had behind the case to shine through
I planned on doing this as well. Already have the mesh and waiting on the M2 to deliver in the next few days. Also aluminum is not magnetic. I thought about using double sided tape but i like your method a lot better.
It’s deff a cleaner look, and you are right about that lol
I thought you were serious.
If you have positive pressure, you don't need to cover every single hole, just cover your intake. If any dust gets in, you actually want th dust to come out, so covering exhaust doesn't make much sense.
True, Tbh I have 3 dogs and my desk is by a window. Just having the case sit there I noticed dust was already in there it would be a problem for me when my system is off and just siting there, so if you have a situation similar to me this might help.
You can't have positive pressure with this much mesh
The magnets would obviously not stick to the NCASE for the same reason that magnets don’t stick to a beer can, because it’s made of aluminum
Whoops, I was today years old when I realized this lol. Good to know, cheers
Don't try it. I've used stickers+magnetic air filter with Ncase m1. It's just not worth it. Because sff case is so small, just blowing the dust out takes less time than actually washing the air filters. And you can't get positive air pressure with that amount of mesh anyway, so dust will still be sucked in.
Very helpful and I’m living for these various angles🫶🏽!
Thank you, glad I could help