I own both the P-01 Omega & P-07, bone stock. Both great guns for different/same reasons. $700 for the 01 and $550 for the 07. 07 is the modern design but the 01 is the classic 75 design. If I had to choose one I could flip a coin and be happy with either one. Good concise review.
Owned both I like the p07 great gun but wasn’t in love with it like the P01. The p01 just shoots amazing and feels perfect in hand. Everyone should own a p01.
Got the same p07 you have I bought it used back before times got so crazy. Feel like i stole one of the best guns i own for the price of 300 bucks. Dont even think it had a round through it. You cant go wrong with any cz
I own a P-07 OMEGA since July 2019 and I'm still in love with it! I have other guns which I have tinkered with a little (sights, trigger shoes, etc.) but my P-07 is just as it came from the factory, except for a feed ramp polish and about 2000 rounds... Nobody is going to inherit this baby, is going to the grave with me!
I own both and like the feel of the p01 better but I shoot the p07 better.... they are both awesome guns!! They converted me to hammer fired guns. Great triggers with mcarbo spring kits
I own both. I also own a CZ 75B Omega and a P10 C. The P 01 is my everyday carry but if I had to bug out with only 1 it would have to be the P 07 because the P 07 will accept the mags for the other 3. That means that I could carry 8 mags loaded with 122 rounds.
Have these exact two guns. I had my P07 before I got the P01. I wanted the P01 to work better for me, but it just does not. The slide is much easier to manipulate for me on the P07. I would never get rid of my P01 though. So, the P07 serves me very well.
I absolutely love my P07. About a year ago like a dumb ass, I sold my P01. Who knows what I was thinking. But I guess I did choose between the two because the P07 is still in my safe. Thank you very much for another good review.
I hadn't shot my P-07 in a while, and was amazed when I took it to the range recently - I could do no wrong with it. Ridiculously accurate and a flat shooter. That said, I'll never part with my PCR, either. Or my SP-01, or......any of my CZs.
@@bsmithhammer ... well that’s impressive since I think the smaller polymer P-07 weighs a lot less than the SP-01? I think it’s about 28 ounces versus 42 ounces in loaded weight?
@@granthenderson696 That's about right, yes. The additional weight of the SP-01 certainly helps mitigate recoil, but in terms of accuracy, no difference.
I own both. The P07 is, along with the Shadow Systems MR920, my primary edc. On balance, it’s probably my favorite gun. And once it’s cajunized it shoots like a vastly more expensive gun. The PO7 got me back into hammer fired guns and I initially picked it up as it would take my P10C mags. I just snagged an OD green P01 which I’ve yet to take to the range, so i can’t honestly give my preference between the two-yet, anyways.
@@screwpicasawhite7114 I recommend getting either one Cajunized--I'd view that as essential to be honest. Beyond that: I prefer the trigger on the P01, and the grip, as well--but that last bit is more of a toss-up; both have great ergos. I do prefer the decocker on the P07, however. I think that if I had to choose just one, I'd probably go w the PO7. But its a bit of a toss up. For me personally, the trigger on the P07 tends to pinch my finger a bit, whereas the P01 doesn't do that. Yet, I prefer the P07 otherwise. Hard to go wrong.
Do you appendix carry? How does your mr920 match up against your cajunized p07 and p01? I currently appendix a mr920 and am looking into getting a cajunized p01 or p07 as well
@@devinnulph7933 I do appendix carry. I’d say that they actually carry in a very similar fashion. All are easy to carry appendix-the P01 perhaps easiest of all; it seems to fit w the natural contours of the body.
I own both...purchased the P-07 first and, surprisingly, I didn't shoot it as well as I'd like or even my wife's P-10 C. It was love at first grip when I put my mitts on the P-01 and picked-up the 75 D PCR even though these two are only cosmetically different. I drill the center of the bullseye with the P-01 and 75 D PCR, and I'm quickly back on target for a compact - very natural fitting in my hands. I carried the a Sig P365 XL the past couple years (a very credible conceal weapon) but it has been replaced with the 75 D PCR/P-01. It's the best pistol I've ever carried. As for P-01 and P-07...that's what I initially thought--and still somewhat true--but I now find them to be only 2nd cousins. Cheers!
I have both the P07 and the non-Omega P01. I love them both. My P01 has the full Cajun Pro Package in it and is one of the nicest guns I have ever shot. I enjoy shooting both of them. Thanks for the comparison.
Do me a favor and take the one that has been cajunized and pull the trigger in double action slightly sideways while pulling back. Tell me if it goes into half-cock? Both of mine that have been cajunized do the exact same thing and going to half cock when I pull the trigger with a little sideways pressure. I'm sure you're wondering why so in short I started trying to pull the trigger with my middle finger instead of my index finger and I noticed it would offen go into half-cock. Basically it would decock.
Same. I've seen that many people call the P07 a polymer version of the P01, but the grip texture, trigger, and ergonomics feel different to me even if you don't take into consideration the weight differences. The P01 just fits my hands better and I shoot it better.
I have p01 that was cajunized with pro package.. Came out awesome! Looking to send out sp01 in the future.. Buddy of mine has p07, and it shoots and feels awesome!
I love the polymer hammer style guns. Been a Glock shooter forever and took a bit getting used to da/sa but went with an HK p2000. Had some work done to it and now I’m looking at the p07 with some Cajun work 👀👀👀
Both are cool but in my eyes the pre-omega trigger is a bit better out of the box. That said I know you can tune up the omega pretty easily :) I just believe the DA trigger pull really needs that one sided trigger bar to limit the flexes (at least this is what Frantisek Koucky - the designer of CZ75 would want :) )
Great video... I own both and full size 75 omega. The P01 is the best shooter for me. The P07 shoots good and super reliable. It is the only polymer gun i own. Love them both but the P01 is best for me. I have large hands and prefer the palm swell grip, which makes the P01 more comfortable, but mostly like metal or alloy frame better. Thanks for the vid.
I really like my two P-01 (black customized w/Cajun parts and the green with Apex parts). For me, going forward, I am not purchasing any guns without a plate option. Waiting on the P07 and/or P-09 to do so from the factory. I would still Cajunize them. I have been watching for a P-10C w/ plate for over a year with no luck. Maybe some day.
I own and love my P-07, but I've always thought that the 75-series pistols had better double action triggers. (Although not as good as my Grand Power.)
The P07 in the Philippines is 1k, the P01 is 1.5k, I'd want the P01 with alloy frame for long term use. If I was not nitpicky with polymer I'd take the P07 for ease of carry if I really needed a modern gun. Overall I'd love to have a P01 for the added durability and less blockier grip.
I have Both of them, and they are all great tools. The P01 to me is more comfortable in the hands. But I find that working the slide on the P07 is a lot easier. One thing I wish the PO7 had is the DeCocker style that the PO1 has. To me the decocker is easier to operate without changing my grip on the PO1. Would love to find a comfortable holster for the PO7 since I had it milled for a RMR to carry. To me the PO1 wins but not buy much. Put it this way the PO1 gets a A+ and the P07 gets a A.
at the gun store yesterday I had to make the decision between these two I went in planning on buying the P07 since it was $180 less now I already own a CZ 75B Omega so talking with the salesman about the pros and cons we got to magazines and how the P07 can use the P10C reverse mags as well as the Sig 226 mags but the P01 Omega can use the same magazine used for CZ 75B, CZ 75 SP-01, CZ 75 SP-01 Shadow as well as for CZ Shadow 2 ....so I now own a CZ P01 Omega and it shoots great
@@professor10193 after doing some diving in it looks like yes it can I had no idea. Pro Mag now makes a p10c mag for 25 bucks that works in the p07 as well finally a mag for the p07 thats reasonable
Both are awesome and very ergonomical. P07 feels a bit more accurate in SA and has great sights but texturing is too subtle and stock DA is gritty, heavy and stages. P01 has more grip options and smoother DA but sights are very narrow and mag release is weaker. I wouldn't get rid of either but they're both vastly better after some upgrades.
Can you even buy the P-07 ? Didn't CZ stop making them? I LOVE my Cajunized P01. That's above my Springfields, Glocks and Sigs. My P01 is without a doubt my favorite handgun. I do want a P07 for sure, just need to find one.
Outstanding comparison video! I've just started looking into the differences between these two. Almost everything I needed to know. Do you notice any difference between the two as far as the trigger pulls (i.e. take up, wall, break, reset, weight of pull)? Thanks again for the excellent content!
I have the p-07 and I like the omega trigger shape, but honestly the single action has basically no wall and that’s kind of annoying. Much prefer the factory trigger system.
I wish they both used the same magazines. I have 3 P-07's, including one modified to DAO and one milled for a red dot. It's one of my top 5 handguns. P01 is also good, the weight isn't that much more with alloy frame.
I was desiding between the p-07 and p -01, and was hoping you would help me choose, I definitely want the decocking version, but wasnt sure if the Omega was the way to go, or was I missing something critical one way or the other? I tend to prefer non polymer guns , but like to be open minded to the best gun period? I own many polymer and steel and alloy framed guns , know very little about CZ pistols, but I carried a P-226 on duty for many years and feel all pistols would benifit from a decocker, so that is one of the features that drew me to a CZ? Great video, I subscribed?
My 1st pistol was a p01 and still think it outshines all other hammers , superior ergonomics, low bore and a few new springs and trigger weight improves. The P07 is an excellent choice for a polymer hammer fire gun however I'd still choose the p01 10 out of 10 times
@@1776orbust I heard you say you prefered the P-01, and because im partial to alloy frame decockers, I was going to try and get one from Cajun Gun Works , what about Omega or not, do you have a preference? Thank you for the reply
@@1776orbust I have nothing ti base my decision on, but I just got my first 1911, with a flat trigger, but have not fired it yet, ive always had standard curved triggers? Thank you for your replies; Donn
PS.love a all metal S/D action gun.big into revolvers.got a 365xl.it's nice&all but striker fired isn't my cup of tea.don't mind extra weight or little extra size.
Shot both but I only own the PO7. The PO1 looks better and has more of reputation because of the NATO test but it does nothing better than the PO7 in my opinion. The PO7 has a better trigger and sights and is also about 200 dollars cheaper.
A P02 is a rare bird indeed can't find them because they don't make them anymore it went from being P02 to now the P01 omega. You are very lucky to have one of those
I own the p 01 Omega the po9 and I had a p10c I love them all but I prefer the p01 Omega better balance with no way that don't kick as bad with the weight cuz it's a little heavier than the feeling of the po7 .
Funny!😆😆 But they’re not that hard to find are they? I think think the P01 may be harder to find? I just found a Phantom that I’m gonna buy. I’m excited!
I own the standard P-01 and the P-07 tactical. Honestly, I am not a huge fan of the P-07. The suppressor height sights were WAY off. After is switched them out for some Dawson fibers the accuracy greatly improved. The only reason I still own the P-07 is to maintain my CZ collection, but it is definitely my last resort firearm and pretty much lives in the safe.
That P01 would actually be lighter if you didn't have that extended threaded barrel. Another thing is the Aluminum P01 is Stronger. That is why the P01 is NATO approved..It functioned incredibly during the torture tests.
Love my P07. Best handgun I’ve owned.
I own both the P-01 Omega & P-07, bone stock. Both great guns for different/same reasons. $700 for the 01 and $550 for the 07. 07 is the modern design but the 01 is the classic 75 design. If I had to choose one I could flip a coin and be happy with either one. Good concise review.
Owned both I like the p07 great gun but wasn’t in love with it like the P01. The p01 just shoots amazing and feels perfect in hand. Everyone should own a p01.
Got the same p07 you have I bought it used back before times got so crazy. Feel like i stole one of the best guns i own for the price of 300 bucks. Dont even think it had a round through it. You cant go wrong with any cz
Jesus ,I’d love to pay that price for one! That is a true steal!
I own a P-07 OMEGA since July 2019 and I'm still in love with it! I have other guns which I have tinkered with a little (sights, trigger shoes, etc.) but my P-07 is just as it came from the factory, except for a feed ramp polish and about 2000 rounds... Nobody is going to inherit this baby, is going to the grave with me!
I own both and like the feel of the p01 better but I shoot the p07 better.... they are both awesome guns!! They converted me to hammer fired guns. Great triggers with mcarbo spring kits
I own both. I also own a CZ 75B Omega and a P10 C. The P 01 is my everyday carry but if I had to bug out with only 1 it would have to be the P 07 because the P 07 will accept the mags for the other 3. That means that I could carry 8 mags loaded with 122 rounds.
Have these exact two guns. I had my P07 before I got the P01. I wanted the P01 to work better for me, but it just does not. The slide is much easier to manipulate for me on the P07. I would never get rid of my P01 though. So, the P07 serves me very well.
I lost both of them in a boating accident.
I found both of them on a fishing trip. 😂
I absolutely love my P07. About a year ago like a dumb ass, I sold my P01. Who knows what I was thinking. But I guess I did choose between the two because the P07 is still in my safe. Thank you very much for another good review.
Been there done that but I won't do it again
What I love about the 07 is the accuracy right out of the box it just shoots such tight groups. At least for me
I hadn't shot my P-07 in a while, and was amazed when I took it to the range recently - I could do no wrong with it. Ridiculously accurate and a flat shooter. That said, I'll never part with my PCR, either. Or my SP-01, or......any of my CZs.
Does your P07 shoot as well as the bigger heavier SP-01?
@@granthenderson696 Absolutely. At least when I do my part. ;-)
@@bsmithhammer ... well that’s impressive since I think the smaller polymer P-07 weighs a lot less than the SP-01? I think it’s about 28 ounces versus 42 ounces in loaded weight?
@@granthenderson696 That's about right, yes. The additional weight of the SP-01 certainly helps mitigate recoil, but in terms of accuracy, no difference.
I own both. The P07 is, along with the Shadow Systems MR920, my primary edc. On balance, it’s probably my favorite gun. And once it’s cajunized it shoots like a vastly more expensive gun. The PO7 got me back into hammer fired guns and I initially picked it up as it would take my P10C mags. I just snagged an OD green P01 which I’ve yet to take to the range, so i can’t honestly give my preference between the two-yet, anyways.
Well now what would you say would be a better first gun the p01 or p07?
@@screwpicasawhite7114 I recommend getting either one Cajunized--I'd view that as essential to be honest. Beyond that: I prefer the trigger on the P01, and the grip, as well--but that last bit is more of a toss-up; both have great ergos. I do prefer the decocker on the P07, however. I think that if I had to choose just one, I'd probably go w the PO7. But its a bit of a toss up. For me personally, the trigger on the P07 tends to pinch my finger a bit, whereas the P01 doesn't do that. Yet, I prefer the P07 otherwise. Hard to go wrong.
Do you appendix carry? How does your mr920 match up against your cajunized p07 and p01? I currently appendix a mr920 and am looking into getting a cajunized p01 or p07 as well
@@devinnulph7933 I do appendix carry. I’d say that they actually carry in a very similar fashion. All are easy to carry appendix-the P01 perhaps easiest of all; it seems to fit w the natural contours of the body.
@@seandurns110 Looking at buying an already cajunized p-01. Trying to decide to get the slide milled or just run irons.
I own both...purchased the P-07 first and, surprisingly, I didn't shoot it as well as I'd like or even my wife's P-10 C. It was love at first grip when I put my mitts on the P-01 and picked-up the 75 D PCR even though these two are only cosmetically different. I drill the center of the bullseye with the P-01 and 75 D PCR, and I'm quickly back on target for a compact - very natural fitting in my hands. I carried the a Sig P365 XL the past couple years (a very credible conceal weapon) but it has been replaced with the 75 D PCR/P-01. It's the best pistol I've ever carried. As for P-01 and P-07...that's what I initially thought--and still somewhat true--but I now find them to be only 2nd cousins. Cheers!
Nice comparison! I'm partial to the P-01, like the feel and looks. Shooting the P-01 is great also. The Lok Grips adds a great touch!
I have both the P07 and the non-Omega P01. I love them both. My P01 has the full Cajun Pro Package in it and is one of the nicest guns I have ever shot. I enjoy shooting both of them. Thanks for the comparison.
Do me a favor and take the one that has been cajunized and pull the trigger in double action slightly sideways while pulling back.
Tell me if it goes into half-cock?
Both of mine that have been cajunized do the exact same thing and going to half cock when I pull the trigger with a little sideways pressure.
I'm sure you're wondering why so in short I started trying to pull the trigger with my middle finger instead of my index finger and I noticed it would offen go into half-cock.
Basically it would decock.
I own both and love both. The P01 just feels a little better to me in hand. I seem to shoot the 01 a little better.
Same. I've seen that many people call the P07 a polymer version of the P01, but the grip texture, trigger, and ergonomics feel different to me even if you don't take into consideration the weight differences. The P01 just fits my hands better and I shoot it better.
I have p01 that was cajunized with pro package.. Came out awesome! Looking to send out sp01 in the future.. Buddy of mine has p07, and it shoots and feels awesome!
Check out mcarbo.
I love the polymer hammer style guns.
Been a Glock shooter forever and took a bit getting used to da/sa but went with an HK p2000. Had some work done to it and now I’m looking at the p07 with some Cajun work 👀👀👀
I just got the P01 and ordered the Shadow 2 Compact and going to order the P07 next week.
Both are cool but in my eyes the pre-omega trigger is a bit better out of the box. That said I know you can tune up the omega pretty easily :) I just believe the DA trigger pull really needs that one sided trigger bar to limit the flexes (at least this is what Frantisek Koucky - the designer of CZ75 would want :) )
Great video... I own both and full size 75 omega. The P01 is the best shooter for me. The P07 shoots good and super reliable. It is the only polymer gun i own. Love them both but the P01 is best for me. I have large hands and prefer the palm swell grip, which makes the P01 more comfortable, but mostly like metal or alloy frame better. Thanks for the vid.
I recently purchased a new P01 Omaga that quickly became my favorite gun. I still see a P07 in my future.
I was looking for a 1-on-1 comparison, and I found it. I think I'm about to buy my first poly.
I really like my two P-01 (black customized w/Cajun parts and the green with Apex parts). For me, going forward, I am not purchasing any guns without a plate option. Waiting on the P07 and/or P-09 to do so from the factory. I would still Cajunize them. I have been watching for a P-10C w/ plate for over a year with no luck. Maybe some day.
Hard to go wrong with any CZ!
P07 has more aftermarket support that’s the only reason I picked it up over the P01. Other than that they are so similar that nothing else matters.
I own and love my P-07, but I've always thought that the 75-series pistols had better double action triggers. (Although not as good as my Grand Power.)
The P07 in the Philippines is 1k, the P01 is 1.5k, I'd want the P01 with alloy frame for long term use. If I was not nitpicky with polymer I'd take the P07 for ease of carry if I really needed a modern gun. Overall I'd love to have a P01 for the added durability and less blockier grip.
I have both and love both. Prefer the PO7 to carry and the PO1 to admire since it's a beautiful gun.
I have Both of them, and they are all great tools. The P01 to me is more comfortable in the hands. But I find that working the slide on the P07 is a lot easier. One thing I wish the PO7 had is the DeCocker style that the PO1 has. To me the decocker is easier to operate without changing my grip on the PO1. Would love to find a comfortable holster for the PO7 since I had it milled for a RMR to carry. To me the PO1 wins but not buy much. Put it this way the PO1 gets a A+ and the P07 gets a A.
at the gun store yesterday I had to make the decision between these two I went in planning on buying the P07 since it was $180 less now I already own a CZ 75B Omega so talking with the salesman about the pros and cons we got to magazines and how the P07 can use the P10C reverse mags as well as the Sig 226 mags but the P01 Omega can use the same magazine used for CZ 75B, CZ 75 SP-01, CZ 75 SP-01 Shadow as well as for CZ Shadow 2 ....so I now own a CZ P01 Omega and it shoots great
@Terry Stanley. GREAT choice. The NATO APPROVED P01 is more accurate and more rugged.
P07 can use sig 226 mags?
Not that im aware never heard that before.
@@professor10193 after doing some diving in it looks like yes it can I had no idea. Pro Mag now makes a p10c mag for 25 bucks that works in the p07 as well finally a mag for the p07 thats reasonable
Both are awesome and very ergonomical. P07 feels a bit more accurate in SA and has great sights but texturing is too subtle and stock DA is gritty, heavy and stages. P01 has more grip options and smoother DA but sights are very narrow and mag release is weaker. I wouldn't get rid of either but they're both vastly better after some upgrades.
Can you even buy the P-07 ? Didn't CZ stop making them? I LOVE my Cajunized P01. That's above my Springfields, Glocks and Sigs. My P01 is without a doubt my favorite handgun. I do want a P07 for sure, just need to find one.
No the stooped making the phantom
Thanks
I would choose the P07 for its look, front saeration, and better adaptability for light/laser light fitting.
Outstanding comparison video! I've just started looking into the differences between these two. Almost everything I needed to know. Do you notice any difference between the two as far as the trigger pulls (i.e. take up, wall, break, reset, weight of pull)? Thanks again for the excellent content!
Triggers are about equal
Both of the guns reviewed have the Omega triggers. They are shipped with manual safeties that can be installed instead of the decockers.
I have the p-07 and I like the omega trigger shape, but honestly the single action has basically no wall and that’s kind of annoying. Much prefer the factory trigger system.
Got my 01 last September, paid $650.00 for it, great shooter
Don’t get the omega system unless you actually plan on keeping it in single action the trigger is mushier, not as nice and has wear and tear issues
Man I really like your videos.When I want to get a good idea about anything "GUN"I go to you,HO&Mr.G..mostly.take care.
I wish they both used the same magazines. I have 3 P-07's, including one modified to DAO and one milled for a red dot. It's one of my top 5 handguns.
P01 is also good, the weight isn't that much more with alloy frame.
Get yourself a P10c and you will be all set with those P07 mags
@@1776orbust Roger that, got one already and most of its mags have been repurposed.
The P01 is a great edc, trust the life of my loved ones with it
I was desiding between the p-07 and p -01, and was hoping you would help me choose, I definitely want the decocking version, but wasnt sure if the Omega was the way to go, or was I missing something critical one way or the other? I tend to prefer non polymer guns , but like to be open minded to the best gun period? I own many polymer and steel and alloy framed guns , know very little about CZ pistols, but I carried a P-226 on duty for many years and feel all pistols would benifit from a decocker, so that is one of the features that drew me to a CZ? Great video, I subscribed?
My 1st pistol was a p01 and still think it outshines all other hammers , superior ergonomics, low bore and a few new springs and trigger weight improves. The P07 is an excellent choice for a polymer hammer fire gun however I'd still choose the p01 10 out of 10 times
@@1776orbust I heard you say you prefered the P-01, and because im partial to alloy frame decockers, I was going to try and get one from Cajun Gun Works , what about Omega or not, do you have a preference? Thank you for the reply
@@TheBandit59 either omega or non the Cajun is a great choice. I prefer the non omega due to the curved trigger but everything is personal choice
@@1776orbust I have nothing ti base my decision on, but I just got my first 1911, with a flat trigger, but have not fired it yet, ive always had standard curved triggers? Thank you for your replies; Donn
Why not both?
Love my P07,P01 and my PCR. If I could only keep one though,it'd probably be the P01
PS.love a all metal S/D action gun.big into revolvers.got a 365xl.it's nice&all but striker fired isn't my cup of tea.don't mind extra weight or little extra size.
Shot both but I only own the PO7. The PO1 looks better and has more of reputation because of the NATO test but it does nothing better than the PO7 in my opinion. The PO7 has a better trigger and sights and is also about 200 dollars cheaper.
What do u think of the p02 omega , I'm lucky enough to own one and luv it. Hard to find info on it. Never saw a review on one.
A P02 is a rare bird indeed can't find them because they don't make them anymore it went from being P02 to now the P01 omega. You are very lucky to have one of those
@@1776orbust thanks for the info , that's why no reviews. The gun was even cajunized.
You need to never ever sell it
@@1776orbust you can count on that.
I don’t understand why you didn’t compare the triggers unless they’re exactly the same
If I'm not mistaking I have your old p01 holster... Multicam SC molded for an olight?
I own the p 01 Omega the po9 and I had a p10c I love them all but I prefer the p01 Omega better balance with no way that don't kick as bad with the weight cuz it's a little heavier than the feeling of the po7 .
Love my P09. Are you also a Firefighter?
Sure was
How do I find your merch? Do you have a link?? Thank you for the amazing content
1776-superstore.creator-spring.com/listing/1776orBuststorefront
Buy as much as you like and tell your friends and family how cool they are if they buy also lol
If you don't mind working on a gun a lot, and you're good with a few FTFs here and there, you can get a CZ. 😂
As a lefty shooter which one should I get
Either they both mostly ambi friendly
👍👍
Any idea of where to find a quality holster for the PO1? Only thing holding me back
Black arch
Craft holsters...
Site comparison ??
I owned a CZ P07 in flat dark earth i really love it
Funny!😆😆
But they’re not that hard to find are they? I think think the P01 may be harder to find? I just found a Phantom that I’m gonna buy. I’m excited!
What about holster capability?
C Z P01. All the way!!
Are the magazines compatible between the P07/P01? If not, I think that would be the deciding factor for most current CZ owners.
Does the P-07 have a wider magazine?
Yes
Are the magazines compatible between the two?
Nope
I own the standard P-01 and the P-07 tactical. Honestly, I am not a huge fan of the P-07. The suppressor height sights were WAY off. After is switched them out for some Dawson fibers the accuracy greatly improved. The only reason I still own the P-07 is to maintain my CZ collection, but it is definitely my last resort firearm and pretty much lives in the safe.
P01 all the time
I just need to know where you got those grips for the P-01.
Lok grips
@@1776orbust I figured as much. They make awesome stuff!
That P01 would actually be lighter if you didn't have that extended threaded barrel. Another thing is the Aluminum P01 is Stronger. That is why the P01 is NATO approved..It functioned incredibly during the torture tests.
The specs I read were from a p01 without a threaded barrel
I own czp09 & o1