Didn't know you could get inside sealed bearings. Is this just for BB bearings, could you get into sealed bearings on wheel hubs/would you recommend it? Another great vid.
+illiterate thug Yea you can use grease in every part, with bearings, to prolong the life of them. All sealed bearings can be serviced this way. The little orange cap on these bearings are what make them "sealed". It's just don't called a dust cap. You just pop the dust cap off and you can grease any sealed set up.
+Garth Stead Yep! It's a fairly common problem. My hands were all most to the point of bleeding last month and they burned so bad. What happens is you start to turn that callus into a blister. The way you hold/work handlebars is a similar to getting blisters with a hand tool. Give it a couple days and it will harden even more and start to peel. By then the burning is gone.
My bearing balls started falling out through the seat stem
Great video👍
+Dominic Cox Thanks Dominic!
Thx dude my bottom bracket is not moving well even but now it should be good I'm gonna try it later on
+BillLe It will save it! Mine is rolling like brand new again. Super dialed.
did you greased only 1 bearing or both?
Didn't know you could get inside sealed bearings.
Is this just for BB bearings, could you get into sealed bearings on wheel hubs/would you recommend it?
Another great vid.
+illiterate thug Yea you can use grease in every part, with bearings, to prolong the life of them. All sealed bearings can be serviced this way. The little orange cap on these bearings are what make them "sealed". It's just don't called a dust cap. You just pop the dust cap off and you can grease any sealed set up.
you ever be riding and your caleces start burning
+Garth Stead Yep! It's a fairly common problem. My hands were all most to the point of bleeding last month and they burned so bad. What happens is you start to turn that callus into a blister. The way you hold/work handlebars is a similar to getting blisters with a hand tool. Give it a couple days and it will harden even more and start to peel. By then the burning is gone.
Do the dust caps literally just pop in
+Bmx Skate Yea they just pop in. The seam is made really right so they don't come out very easy but they just pop back into place and you're done.
My bearing balls started falling out how to fix that
2 steps
1 sell your bike
2 buy a new bike
Buy new bearings off Ebay their cheap and good quality
Gloves?
what's up with the LED strip on the DT? :D
+Fishpai~ It's for light at night! Works really well. Keeps cops from giving me tickets for no lights.
Why is my bike making a noise when I pedal
Grease your pedal bearings if that doesn't work then its your bb
Did you put peanut butter in the bearing
Jk😂
Why do you have rubber gloves on?
+Marc Barilla Because I have my hands in grease.
Get some gloves that actually fit you
+CallumFilms Gloves do not matter.