I dont usually make suggestions but i think a really cool video idea is to see which bodies would transfer over to different platforms. You have so many rc cars from different manufactures. It would be cool if this body or the mad van would fit an arrma or traxxas. Its an idea that doesnt cost anything and i think a bunch of people would be interested.
Hi! Great video!!! I have it for months and I found it instantly great. Then I asked you to review it… glad you enjoy it. It has a few downsides, I can say after months using it. Shocks are ok, 120mm putting the center of gravity way too high (clearance isn’t everything 😉), I add some shocks mounts to make it lower and improve the flex, and I trim the body shell wings. The body shell is terrible, breaking easily, I glued glass fiber with neoprene to make it more resistant (like Kevin). The body shell posts are very fragile as well and I had to change them… and take care of it, put grease everywhere because it get rusty easily…. Specifically all around all the ball bearings, grease the gearbox too and the diffs.. I definitely need to add some weight, but all in all it’s a great crawler for a third of a TRX-4… it’s maybe not slow enough but it’s not bad going slow… and it’s very fun on 3S, rock bouncer style 😎😎😎 Oh last thing, the tires are not bad at all! Not that sticky, but very soft. I think it’s probably one of the best crawler right out the box..
I think it looks better than the Mauler, and it certainly seems to drive well, straight out of the box. It would be interesting to see the RGT and the Mauler head to head. 👍🏻
I was tempted to buy this little guy for my 1st RGT rig, stopped short and bought the 18600 instead. Now I have made up my mind and getting this one on my list. That 550 motor should do the trick to climb. I do noticed the softer drag brakes. But then again.. I have decided. Thanks Phil.. you rock 👍🏾👍🏾
That's a decent platform to make into a Monster Truck. I did a little project build of late using an FTX Kanyon, adding a set of Proline 6" monster truck tyres and wheels, some wheel adapters, the usual mods I've done in the past to a Kanyon, a truck shell, and 2600kv 3660 brushless motor with 120A esc on 3S. It's quick enough for an MT, so realistic. This RGT you've reviewed looks great! edit, oh and with it being an FTX and sharing the axles with the Outlaw, out came the locked diffs and in went a pair of Outlaw diffs, 40k wt oil in the front and 25k wt in the rear.
I told you, you were the one that made me decide to order one. I just got mine in blue yesterday, I thought it would come in grey but I don't mind anyway 😁. The first thing I did was to adjust a bit the front shock absorbers because it's heavier there and I turned upside down the bumper mounts so now I have a lot more travel on the front suspension 🙂
Im in love with tht rgt... It not look nice with tht body shell.. But the perfomance it awesome and the rig can fight 1st place with the capra? Damm... I thought It wont do better... I WANT ONE! HAHAHA
5 minutes? My 2 RGT EX86110's with the same battery run for over an hour no problem at all. Thats a nice bit of kit for sure and RGT keeps kicking goals in the budget end of the market.
This thing looks awesome. Kinda reminds me of the old clodbuster/clodzilla chassis we use to build. Definitely needs 4 wheel steering though in my opinion. Still looks good 😎👍. I might have to look into 1 of these,lol. The price seems rite.
@@TomleyRC that's awesome,I built a few and then life happened and had to sell them off. It's all good as I mite look into 1 of these. Just gotta see if I can get the parts to convert it to 4ws,lol
Very nice video review, i was thinking of buying a high speed rc truck again, but when i watched your video, i was Amazed by the smooth performance of this RGT trample, high speed rc trucks are good but costly in maintenance especially in gears and drive shafts 😁. I will be ordering this RGT soon.. I just subscribed to your channel for future updates..
Very nice truck. While it is beyond most of our limited RC budgets, will you do a complete Insta360 review? It's unfortunate that you do not get the ability to FPV with it, what can you do with it after you've pulled the SD card? Besides the camera itself, what other stuff do you have to buy with it, realistically, to get something useful to use? What would the all-in cost be?
I have a full review coming 👍 I really like it… took it out yesterday to a show and did a little bit of FPV… using my phone… range is obviously really not that good. But it’s so versatile, you can mount it in so many decent places for the perfect shot
Wow yeah that is super impressive to be fair looks like a beast, definitely going to be worth the money. Stop tempting me, but hey Christmas not far away now 😂
Will it be worth reinforcing the body with some silicon/rtv to be able to bent without breaking and use some wheel spacers to avoid body rubbing or will it messes with the geometry of it?
That would make a good monster truck, more power! Bigger wheels nice crawler stock. I'm waiting to see the enduro video crazy how the landscape has changed from a muddy mess to that.
Crazy how this truck isn't really available in the US. It's a nice one the second I saw it I sold my new Christmas everest 10 lol and ordered that bad boy
I really like that looks like its gonna be a very capable crawler id love to have one with my mamba micro x and the holmes hobbies revolver snubnose in there. (In my experience in 5 minutes your done ) thats what she said 😆 🤣 😂 thanks for sharing Phil
How do you compare this one vs FTX Ravine please? I want to buy RC crawler, can get only one and will not upgrade it anytime soon... so which one would you recommend? (Or if you would be kind enough, I am deciding between EX16100V2, HB Toys RTR R1001, EX86130,18100, FTX Ravine).
Different body or just modify that body and wouldn’t have issue with rubbing. Seems like great vehicle. I wonder how add on upgrade support is for it. Integry or what ever. Just an FYI as well not sure what it is but mic is picking up a very high pitch feedback from something. Maybe radio? Or is it from car?
hi Phil, do you think the reverse drive thing does much? I had a truck with it that torque twisted like crazy, thought that RD would have prevented it but once the front went light, it was game over. Nice video as ever, and the quarry actually looks scary. Take care 👍🍺
Compared to the Mauler it’s certainly noticeable. The newer FTX/RGTs have it and yeah, I think it is a good thing. Although timing your shocks helps as well along with weight distribution
Good bit better electrics, cvds instead of dog bones up front and a slipper clutch are some differences I've notice. Rock Hammer might side hill a little better. Thanks for the video.
@@TomleyRC Just found a new toy, it's not out yet but it's called the Redcat Danchee Ridgerock, 4WD and 4 wheel steering. I'm betting you're going to want it too haha. ($139 to preorder from Horizon Hobby).. man that thing is going to be good, it's 10th scale too. I'm too cautious, I'll wait to see how it works for others first.... knowing my look, it'll become a 500 quid machine in that time haha
I am considering to purchase this truck but I only came across a few parts for spares. Has anyone a good link to spareparts for this model? Or useable with other models? Thanks.
Damm, i wanted to spend only 200eur on the mauler but for 50eur more this is definettly worth it since it comes with all the upgrades mauler needed! only missing front lights!
food!!
You’re so predictable haha 😅
I dont usually make suggestions but i think a really cool video idea is to see which bodies would transfer over to different platforms. You have so many rc cars from different manufactures. It would be cool if this body or the mad van would fit an arrma or traxxas. Its an idea that doesnt cost anything and i think a bunch of people would be interested.
I mean it’s pretty easy to figure out on your own
@@Eddiee757 not when the seller I found for one of these shells says the wheel base is 285 but its actually 330
@@beejsonw ok?
I’d like to see same video. Good suggestion
This is probably one of the nicest looking crawlers I've seen here lately...🤟😆
Hi! Great video!!! I have it for months and I found it instantly great. Then I asked you to review it… glad you enjoy it. It has a few downsides, I can say after months using it. Shocks are ok, 120mm putting the center of gravity way too high (clearance isn’t everything 😉), I add some shocks mounts to make it lower and improve the flex, and I trim the body shell wings. The body shell is terrible, breaking easily, I glued glass fiber with neoprene to make it more resistant (like Kevin). The body shell posts are very fragile as well and I had to change them… and take care of it, put grease everywhere because it get rusty easily…. Specifically all around all the ball bearings, grease the gearbox too and the diffs..
I definitely need to add some weight, but all in all it’s a great crawler for a third of a TRX-4… it’s maybe not slow enough but it’s not bad going slow… and it’s very fun on 3S, rock bouncer style 😎😎😎
Oh last thing, the tires are not bad at all! Not that sticky, but very soft. I think it’s probably one of the best crawler right out the box..
We're do you buy parts from, stuck between getting this or the mauler
HI,Do you use the bracket to move the suspension locking point up?
Thanks!
Thank you Matt 🙏
RGT has increasingly been getting better over the years. Rock Crusier was my. first. Love RGT
I think it looks better than the Mauler, and it certainly seems to drive well, straight out of the box. It would be interesting to see the RGT and the Mauler head to head. 👍🏻
I was thinking that!
+1 to this. RGT Trample vs RGT Rock Hammer / FTX Mauler crawl
I was tempted to buy this little guy for my 1st RGT rig, stopped short and bought the 18600 instead. Now I have made up my mind and getting this one on my list. That 550 motor should do the trick to climb. I do noticed the softer drag brakes. But then again.. I have decided. Thanks Phil.. you rock 👍🏾👍🏾
I was looking for a review of this on the channel a few days ago And boom. Thank you for confirming that it needs to be on the way in the mail
You are welcome Bobby
Woww...bellissimo posto per testare il nuovo modello di RGT ...bel video ... il modello è stupendo ... ciao dall'Italia
Nice bit of kit there Tomley, location looks great.
I really do like the RGT brand, I've got a few and none disappoint. This one looks great too. Awesome review.
Nice work my friend , cool looking rig , great camera work . Loved the running part of the video.
Thanks dude 👍
I have been looking at crawlers lately think you’ve helped make up my mind Phil
Having just watched this video, I have pressed the buy button on one of these.
I didn’t even know these things existed a week ago. Now I can’t wait!
Oooo I’ve been eye balling that on Banggood for a while
Yip.. SOLD..
It's going on the list.!
The long, long, long list that never stops growing.! 😜
Great crawler the wheels certainly help being nice and big, it’s also got excellent ground clearance and packs a punch when you need it 😎👍
3:39 Robots in disguise? Good stuff man!
Cool and beautyful crawler, excelent work my friend!)🤩💥💯👍👏
RGT has come a long way from their early crawlers!
Agree
AWESOME R/C CAR TOMLEY!!
That's a decent platform to make into a Monster Truck. I did a little project build of late using an FTX Kanyon, adding a set of Proline 6" monster truck tyres and wheels, some wheel adapters, the usual mods I've done in the past to a Kanyon, a truck shell, and 2600kv 3660 brushless motor with 120A esc on 3S. It's quick enough for an MT, so realistic. This RGT you've reviewed looks great! edit, oh and with it being an FTX and sharing the axles with the Outlaw, out came the locked diffs and in went a pair of Outlaw diffs, 40k wt oil in the front and 25k wt in the rear.
I told you, you were the one that made me decide to order one. I just got mine in blue yesterday, I thought it would come in grey but I don't mind anyway 😁.
The first thing I did was to adjust a bit the front shock absorbers because it's heavier there and I turned upside down the bumper mounts so now I have a lot more travel on the front suspension 🙂
I like that you answered my camera question before I asked it. 👊👊👊👊
Hello Tomley RC ! This Jeep is cool 😀! Great the chassis ! The place where you made this video is awesome ! 👌🏼👍🏻👍🏻👍🏻👍🏻👍🏻
Thanks mate. It’s a really nice place 😎👍
Awesome ground clearance 🤙
i'm impressed,a low end crawler thats better out of the box than the rift thats expensive as hell has full tork twist!!
Pretty nice looking truck, Tomley! 😃
Great bashing there!!!
Stay safe there with your family! 🖖😊
Cool big tires truck! love it!
Loven the new garage Tomly, I like bigger better this thing is quite a good looking big-rig... get ya some o this!
I like the way it looks
Nice vid and review as usual 👌👍. Also nice to see the Sherp on the shelf, clean and ready for it's next outing (in a year or two) 😉✌️
Traxxas jokes make my day, Phil! 👍👍
Even if it's been 2 years now ... great video 👍.
Based on this I ordered this RGT and I am waiting for it 😁, thanks pal 👍
Thats a cracking crawler mate.. Love it...
Nice crawler! Might just pick one of these up! Keep up the great videos ! Love the new shop too! 👍👍🤙👽😎
Cheers dude
The RGT and the FTX remind me so much of the everest10 redcat almost identical chassis on the RGT and axles on the FTX MAULER.
Yes, I think they are the same platform
That reverse drive will make a huge difference with the torque twist and most definitely required 👌🏼
4:26: is that a metric fist or imperial ??
Metric of course haha
Im in love with tht rgt... It not look nice with tht body shell.. But the perfomance it awesome and the rig can fight 1st place with the capra? Damm... I thought It wont do better... I WANT ONE! HAHAHA
Yes… it certainly performed really well! Maybe I should do it side by side with the Capra
Love the looks and the fact that's its capable too is just the cherry on the top!
😁👍
Nice video! 👍
5 minutes? My 2 RGT EX86110's with the same battery run for over an hour no problem at all.
Thats a nice bit of kit for sure and RGT keeps kicking goals in the budget end of the market.
Well… maybe 10.. although it may be that I’ve had a few duff batteries. This one actually surprised me. Not sure I’d get an hr out of it though!
@@TomleyRC haha fair enough mate. I appreciate the reply and look forward to seeing your indoor crawler setup!
Goodlooking truck 🤙⭐
Good looking Rocky 🤘
Phil does it have functioning lights ?? Because the mauler does, couldn't tell if this one does ??
If i own one, i think i will modified the crawler into a monster truck. That will be awsome...You should try it Tomley..
Yes, would look good
Nice crawler 🔥
Can you do more of the LC racing truggy please,thank you and be safe out there
Sweet. Thank you for sharing.
This thing looks awesome. Kinda reminds me of the old clodbuster/clodzilla chassis we use to build. Definitely needs 4 wheel steering though in my opinion. Still looks good 😎👍. I might have to look into 1 of these,lol. The price seems rite.
Yeah.. the Clodzilla. I think I built a Clodzilla 4 around 10yrs a go.. was a beautiful build, but needed quite a bit of work
@@TomleyRC that's awesome,I built a few and then life happened and had to sell them off. It's all good as I mite look into 1 of these. Just gotta see if I can get the parts to convert it to 4ws,lol
Very nice video review, i was thinking of buying a high speed rc truck again, but when i watched your video, i was Amazed by the smooth performance of this RGT trample, high speed rc trucks are good but costly in maintenance especially in gears and drive shafts 😁. I will be ordering this RGT soon..
I just subscribed to your channel for future updates..
Should I buy one as a first crawler? Looks pretty cool, like a monster truck as others have said!
Very nice set up 👍🏻🍻
It's more to meets the eye! (Transformers!) almost for the rock crawler.
What about waterproof ability?Can it submerged?
In my experience they are fine with water… although never recommend submerging them
THANKS FOR POSTING SIR GREAT VIDEO OF A NICE LOOKING TRUCK🇬🇧💂♥️💯🕊️✌️
Thanks Mike
Looks a capable truck to be fair 👌👍👍
Where do you get upgrades for it at or replacement parts from. I do have the rgt86100 that I totally upgraded n runs great. I'm liking this one now🤔🤔
Yeah,looks nice for a toy grade Chinese ,try to get parts if available in under 2 months
Very nice truck. While it is beyond most of our limited RC budgets, will you do a complete Insta360 review? It's unfortunate that you do not get the ability to FPV with it, what can you do with it after you've pulled the SD card? Besides the camera itself, what other stuff do you have to buy with it, realistically, to get something useful to use? What would the all-in cost be?
I have a full review coming 👍 I really like it… took it out yesterday to a show and did a little bit of FPV… using my phone… range is obviously really not that good. But it’s so versatile, you can mount it in so many decent places for the perfect shot
@@TomleyRC I’ve seen footage shot from quads and the Insta360 isn’t affected by range, is it? It’s recording to the SD card, isn’t it?
@@kodak_jack yeah, it records to the internal memory. The range is just WiFi/Bluetooth to see the screen on your phone.
Wow yeah that is super impressive to be fair looks like a beast, definitely going to be worth the money. Stop tempting me, but hey Christmas not far away now 😂
Super upload my friend 👍
Nice crawler😎
Just bought one using your link ;)
😎👌
Will it be worth reinforcing the body with some silicon/rtv to be able to bent without breaking and use some wheel spacers to avoid body rubbing or will it messes with the geometry of it?
That would make a good monster truck, more power! Bigger wheels nice crawler stock. I'm waiting to see the enduro video crazy how the landscape has changed from a muddy mess to that.
Yeah… lots of green over there now. Hoping to get the new Element out next weekend. Flat out at work this week 😩
I like that😎
Crazy how this truck isn't really available in the US. It's a nice one the second I saw it I sold my new Christmas everest 10 lol and ordered that bad boy
How many degrees does it climb if give maximum grip on the surface? Have you done something like that?
Looks cool
Nice little crawler for the price.
Awesome looking crawler, I am looking to buy my second truck, and thus is a contender for that place 👌🙃😁
Your mum watches your videos?… I must admit, I’m a bit sad and jealous🥺! This thing is truly impressive Phil! 💪🏼💯☕️
Yeah she does, she’s actually got a few videos herself. (Just stuff about living in France)
@@TomleyRC good for her ! That’s awesome!
Phil, do you think FTX would bring this in to replace the Mauler?
I’ve spoken to FTX and they are working on a new Mauler, just not sure it will share this chassis set up though
@@TomleyRC OK cool, I'll keep my eye out for news on their Facebook pages
Is the drag brake the wheels rubbing on the shell lol 😂
Are they from same company?
Jeep Gladiator body style it is cool. Have you tried any Red Cat rc trucks I just got a volcano EPX. It was $179 USD
I really like that looks like its gonna be a very capable crawler id love to have one with my mamba micro x and the holmes hobbies revolver snubnose in there. (In my experience in 5 minutes your done ) thats what she said 😆 🤣 😂 thanks for sharing Phil
Haha… but yeah, that’s would be a nice set up
Wish FTX would release this in the UK. I have a Mauler which is awesome, but this looks better!
nice! optimus prime is pictured on those chassis plates😁👍
I wanna see you get your hands on the Absima cr3 sherpa. Would like to see your reviews on it.
In regards to repairs, 🔧do you know what aftermarket parts fit the RGT 18100 TRAMPLE? or do I have to purchase only RGT replacement parts?
How do you compare this one vs FTX Ravine please? I want to buy RC crawler, can get only one and will not upgrade it anytime soon... so which one would you recommend? (Or if you would be kind enough, I am deciding between EX16100V2, HB Toys RTR R1001, EX86130,18100, FTX Ravine).
Different body or just modify that body and wouldn’t have issue with rubbing. Seems like great vehicle. I wonder how add on upgrade support is for it. Integry or what ever.
Just an FYI as well not sure what it is but mic is picking up a very high pitch feedback from something. Maybe radio? Or is it from car?
Looks great fun!Although I'm still loving my FTX Mauler though!
Oh crap, now I gotta go buy one.
Does the esc support 3s battery?
hi Phil, do you think the reverse drive thing does much? I had a truck with it that torque twisted like crazy, thought that RD would have prevented it but once the front went light, it was game over. Nice video as ever, and the quarry actually looks scary. Take care 👍🍺
Compared to the Mauler it’s certainly noticeable. The newer FTX/RGTs have it and yeah, I think it is a good thing. Although timing your shocks helps as well along with weight distribution
Good bit better electrics, cvds instead of dog bones up front and a slipper clutch are some differences I've notice. Rock Hammer might side hill a little better. Thanks for the video.
looks okay for the money
That's awesome that it has the Decepticons logo from the Transformers in the frame
Autobot symbol dude!!!
Correct me if I'm wrong, but this looks like a large version of the Devastator micro crawler.
Yes, it is a little bit like the Devastator
@@TomleyRC Just found a new toy, it's not out yet but it's called the Redcat Danchee Ridgerock, 4WD and 4 wheel steering. I'm betting you're going to want it too haha. ($139 to preorder from Horizon Hobby).. man that thing is going to be good, it's 10th scale too. I'm too cautious, I'll wait to see how it works for others first.... knowing my look, it'll become a 500 quid machine in that time haha
What size wheel hex does this have?
What do you think would be better over all and more capable and fun. This Or the rgt EX86100 V2? Thank appreciate it can't make my mind up
The 86100 is more of a proper crawler, this is a little more like a comp crawler. Both decent though
I am considering to purchase this truck but I only came across a few parts for spares. Has anyone a good link to spareparts for this model? Or useable with other models? Thanks.
wow looks gd budd. look like it did really will crawling around.
hello , can i use lipo 2 s in this crawler instead of NIMH or its bad for his crawling specs .
Damm, i wanted to spend only 200eur on the mauler but for 50eur more this is definettly worth it since it comes with all the upgrades mauler needed! only missing front lights!
Found my new d12 chassis 😁🍻